[Repeater-Builder] Mistery Repeater Equipment list
The first controller layout was an S-Com 7k through one of the original Link RLC-6 boards. The RF was the famous Spectrum Brand TX RX strips. The power supply (which also runs three other repeaters) is a Triplitte. In sequence: I replaced the RLC-6 board after trying a shotgun chip swap and new firmware on the original RLC-6. I replaced the S-Com 7K with a another 7K and updated firmware (the Vyex 7K DAB). I replaced the Spectrum RF Equipment with brand new Maggiore stuff, which included the second updated S-Com 7K (the RLC-6 was not in the second version). I replaced the second 7K with a third 7K. The problem still rears its ugly head. Main audio fails and the controller goes into a weird loop lockup reset mode. The power supply works fine, also running three other repeaters, which work just peachy. The third generation equipment has the same problems as the first generation. I found the problem... I'll take a question or two more if you want, then I'll post what I found. cheers skipp Bob Dengler [EMAIL PROTECTED] wrote: At 4/27/2005 11:01 AM, you wrote: Mystery: Repeater Problem of the Month Club. Were all the repeater controllers RLC-6s, or was the replacement something else? Bob NO6B Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Mistery Repeater Equipment list
I'm like a kid a Christmas I can't wait to open that email. Gary LaForce Chariton Valley TriStar Communications Columbia Service Department Supervisor 573.441.2224 Direct Shop line 573.442.1147 Main Business Line 573.449.8310 Shop Fax line [EMAIL PROTECTED] -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of skipp025 Sent: Wednesday, April 27, 2005 3:22 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Mistery Repeater Equipment list The first controller layout was an S-Com 7k through one of the original Link RLC-6 boards. The RF was the famous Spectrum Brand TX RX strips. The power supply (which also runs three other repeaters) is a Triplitte. In sequence: I replaced the RLC-6 board after trying a shotgun chip swap and new firmware on the original RLC-6. I replaced the S-Com 7K with a another 7K and updated firmware (the Vyex 7K DAB). I replaced the Spectrum RF Equipment with brand new Maggiore stuff, which included the second updated S-Com 7K (the RLC-6 was not in the second version). I replaced the second 7K with a third 7K. The problem still rears its ugly head. Main audio fails and the controller goes into a weird loop lockup reset mode. The power supply works fine, also running three other repeaters, which work just peachy. The third generation equipment has the same problems as the first generation. I found the problem... I'll take a question or two more if you want, then I'll post what I found. cheers skipp Bob Dengler [EMAIL PROTECTED] wrote: At 4/27/2005 11:01 AM, you wrote: Mystery: Repeater Problem of the Month Club. Were all the repeater controllers RLC-6s, or was the replacement something else? Bob NO6B Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Mistery Repeater Equipment list
I want to know as well (me - someone who does not use spectrum or maggiore) James Gary Laforce wrote: I'm like a kid a Christmas I can't wait to open that email. Gary LaForce Chariton Valley TriStar Communications Columbia Service Department Supervisor 573.441.2224 Direct Shop line 573.442.1147 Main Business Line 573.449.8310 Shop Fax line [EMAIL PROTECTED] -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:Repeater-Builder@yahoogroups.com] On Behalf Of skipp025 Sent: Wednesday, April 27, 2005 3:22 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Mistery Repeater Equipment list The first controller layout was an S-Com 7k through one of the original Link RLC-6 boards. The RF was the famous Spectrum Brand TX RX strips. The power supply (which also runs three other repeaters) is a Triplitte. In sequence: I replaced the RLC-6 board after trying a "shotgun" chip swap and new firmware on the original RLC-6. I replaced the S-Com 7K with a another 7K and updated firmware (the Vyex 7K DAB). I replaced the Spectrum RF Equipment with brand new Maggiore stuff, which included the second updated S-Com 7K (the RLC-6 was not in the second version). I replaced the second 7K with a third 7K. The problem still rears its ugly head. Main audio fails and the controller goes into a weird loop lockup reset mode. The power supply works fine, also running three other repeaters, which work just peachy. The third generation equipment has the same problems as the first generation. I found the problem... I'll take a question or two more if you want, then I'll post what I found. cheers skipp Bob Dengler [EMAIL PROTECTED] wrote: At 4/27/2005 11:01 AM, you wrote: Mystery: "Repeater Problem of the Month Club". Were all the repeater controllers RLC-6s, or was the replacement something else? Bob NO6B Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Mistery Repeater Equipment list
Gounding between chassis. - Original Message - From: Gary Laforce To: Repeater-Builder@yahoogroups.com Sent: Wednesday, April 27, 2005 2:24 PM Subject: RE: [Repeater-Builder] Mistery Repeater Equipment list I'm like a kid a Christmas I can't wait to open that email. Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.