RE: [Repeater-Builder] Power Module Help
Datasheet sent direct -Original Message- From: Paul Kerry [mailto:[EMAIL PROTECTED] Sent: 20 July 2004 01:06 To: Repeater-Builder@yahoogroups.com Subject:RE: [Repeater-Builder] Power Module Help Hi Albert, That power module is used in the following radios TM-V7A, TM-732A, TM-733A, FT-5100, FGT-5200, FT-8000R & FT-8100R Hope this helps Paul G6LSD -Original Message- From: Albert [mailto:[EMAIL PROTECTED] Sent: 19 July 2004 17:28 To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Power Module Help Hi and thanks for reading... I have a UHF Mobile Micor that I just converted to repeater service. However the PA deck only puts out 10 watts and I'd like to see a little more power than that. I have an M57788M power module that is a 45 watt power module and I would like to use that instead of the stock PA deck for the micor. I've looked at the schematic for the 220 power module amp (on repeater builder.com) and it seems pretty simple to doexcept for one minor detail. The module used in the 220 amp is an SAV15 in an H2 package and has four leads. The M57788M is in an H3A package and has five leads. Respectively, Vcc1 is A+, Vcc2 would be control, but I don't know what Vcc3 would be. So far, I have'nt been able to locate a data sheet online that would help me figure out what Vcc3 would be used for. Does anyone have some info that could help... A schematic or data sheet... Thanks es 73's Albert/WB7AWL Yahoo! Groups Links My Inbox is protected by SPAMfighter 13 spam mails have been blocked so far. Download free www.spamfighter.com today! My Inbox is protected by SPAMfighter 13 spam mails have been blocked so far. Download free www.spamfighter.com today! Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ <>
RE: [Repeater-Builder] Power Module Help
Hi Albert, That power module is used in the following radios TM-V7A, TM-732A, TM-733A, FT-5100, FGT-5200, FT-8000R & FT-8100R Hope this helps Paul G6LSD -Original Message- From: Albert [mailto:[EMAIL PROTECTED] Sent: 19 July 2004 17:28 To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Power Module Help Hi and thanks for reading... I have a UHF Mobile Micor that I just converted to repeater service. However the PA deck only puts out 10 watts and I'd like to see a little more power than that. I have an M57788M power module that is a 45 watt power module and I would like to use that instead of the stock PA deck for the micor. I've looked at the schematic for the 220 power module amp (on repeater builder.com) and it seems pretty simple to doexcept for one minor detail. The module used in the 220 amp is an SAV15 in an H2 package and has four leads. The M57788M is in an H3A package and has five leads. Respectively, Vcc1 is A+, Vcc2 would be control, but I don't know what Vcc3 would be. So far, I have'nt been able to locate a data sheet online that would help me figure out what Vcc3 would be used for. Does anyone have some info that could help... A schematic or data sheet... Thanks es 73's Albert/WB7AWL Yahoo! Groups Links My Inbox is protected by SPAMfighter 13 spam mails have been blocked so far. Download free www.spamfighter.com today! Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ <>
[Repeater-Builder] Power Module Help
Hi and thanks for reading... I have a UHF Mobile Micor that I just converted to repeater service. However the PA deck only puts out 10 watts and I'd like to see a little more power than that. I have an M57788M power module that is a 45 watt power module and I would like to use that instead of the stock PA deck for the micor. I've looked at the schematic for the 220 power module amp (on repeater builder.com) and it seems pretty simple to doexcept for one minor detail. The module used in the 220 amp is an SAV15 in an H2 package and has four leads. The M57788M is in an H3A package and has five leads. Respectively, Vcc1 is A+, Vcc2 would be control, but I don't know what Vcc3 would be. So far, I have'nt been able to locate a data sheet online that would help me figure out what Vcc3 would be used for. Does anyone have some info that could help... A schematic or data sheet... Thanks es 73's Albert/WB7AWL Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/