[Repeater-Builder] Re: CAT300 programming?
WRONG!If the repeater isn't used until next month, then the beacon won't be sent till next month! Cheers Dave UZN --- In Repeater-Builder@yahoogroups.com, Mark Cindy Cosgrove [EMAIL PROTECTED] wrote: Hi, I hpoe this helps. 1) Enter the 7number code. 2) Enter *607* 900 3) Enter *0 to exit Mark N8TSK [EMAIL PROTECTED] --- On Thu, 7/24/08, dave_g7uzn [EMAIL PROTECTED] wrote: From: dave_g7uzn [EMAIL PROTECTED] Subject: [Repeater-Builder] CAT300 programming? To: Repeater-Builder@yahoogroups.com Date: Thursday, July 24, 2008, 9:03 AM Hi All, I have a cat300 controller (not DX) and am wading my way through the manual. The problem is that in the UK a repeater MUST send out it's ident every 15 minuets and as far as I can see although the id timer can be set for 15 mins, it will only send it out when the repeater is bought up! Is there a timer or other way of forcing the controller to give it's ident even if it has been idle? Any help much appreciated. ...Cheers Dave G7UZN London
[Repeater-Builder] Re: CAT300 programming?
Thanks to all those that have offered advice. I will try your suggestions and report back (probably with a HELP!) Cheers Dave UZN --- In Repeater-Builder@yahoogroups.com, Howard Klino [EMAIL PROTECTED] wrote: First load your repeater ID into one of the blank voice message slots. Then prigram a schedular to make the controller ID every 15 minutes or what ever time is needed as required to ID the repeater when not in use. Howard K2IMO [EMAIL PROTECTED]
[Repeater-Builder] Re: CAT300 programming?
First load your repeater ID into one of the blank voice message slots. Then prigram a schedular to make the controller ID every 15 minutes or what ever time is needed as required to ID the repeater when not in use. Howard K2IMO [EMAIL PROTECTED]
Re: [Repeater-Builder] Re: CAT300 programming?
On this page http://www.repeater-builder.com/cat-auto/cat-index.html there are links to the company web page and to the CAT controllers mailing list. At 06:30 AM 07/24/08, you wrote: Nuffink in the manual about a beacon ID mode! Cheers Dave UZN --- In Repeater-Builder@yahoogroups.com, wd8chl [EMAIL PROTECTED] wrote: dave_g7uzn wrote: Hi All, I have a cat300 controller (not DX) and am wading my way through the manual. The problem is that in the UK a repeater MUST send out it's ident every 15 minuets and as far as I can see although the id timer can be set for 15 mins, it will only send it out when the repeater is bought up! Is there a timer or other way of forcing the controller to give it's ident even if it has been idle? Any help much appreciatedCheers Dave G7UZN London You have to ID even if the repeater HASN'T transmitted? Huh, the US is just the opposite...anyway, I'm not familiar with the CAT controllers, but look for a beacon ID mode. Yahoo! Groups Links
[Repeater-Builder] Re: CAT300 programming?
Nuffink in the manual about a beacon ID mode! Cheers Dave UZN --- In Repeater-Builder@yahoogroups.com, wd8chl [EMAIL PROTECTED] wrote: dave_g7uzn wrote: Hi All, I have a cat300 controller (not DX) and am wading my way through the manual. The problem is that in the UK a repeater MUST send out it's ident every 15 minuets and as far as I can see although the id timer can be set for 15 mins, it will only send it out when the repeater is bought up! Is there a timer or other way of forcing the controller to give it's ident even if it has been idle? Any help much appreciatedCheers Dave G7UZN London You have to ID even if the repeater HASN'T transmitted? Huh, the US is just the opposite...anyway, I'm not familiar with the CAT controllers, but look for a beacon ID mode.