At one time had 50 Micors on the air, all using CSI-32, Comm Spec & Zetron Controllers, all the cards come out. Easy interface. Check repeaterbuilder.com
tracomm --- In Repeater-Builder@yahoogroups.com, "Eric Vincent" <eric...@...> wrote: Hello group, I need to setup an old UHF Micor repeater and I need help. It suppose to be simple but my manual is not complete and the version is a little bit different. I just want to have this station in carrier squelch and very basic setup. Realy not sure if it's better to keep the cards but I can add any external controller like HNRC-2 /4 or Zetron. It will be appreciated if someone in the group can help me and have the right jumper setup for the back plane and other modules. Here the list of my equipment : Squelch Gate : TLN4662 TOT : TRN8684B2 Station control module : TLN4635B Line Driver : TLN4668 Back Plane : TLN5644A Receiver Audio & Squelch Board : TRN6006A Exciter : TLD5492 Receiver : TRE1003BA RF Amplifier : TLE1713A-1 (75Watts) Right now, the RX (447.600) and TX (442.600) work's well and sensitivity and power output is ok. I found a bad and open capacitor on the Receiver Audio & Squelch Board, C233 (470pF) and now the Squelch operate well, before it was all the time Unsquelch. If you prefer you can reach me in private at ericvin AT telus DOT net. Thank you. Eric VE2VXT /VE7