RE: [Repeater-Builder] Removing Scotchkote - from the manufacturer
Tom Manning and Group, Sorry about that, I just saw your request for the dimensions on the DB 220 MHz antenna I have. Sometimes the Yahoo group messages get lost in the cyber bit bucket, sometimes I get the messages but several days late. If you can't get that info from Doug let me know and I will measure my antenna and post it here. Paul -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, January 23, 2008 11:07 PM To: Repeater-Builder@yahoogroups.com Cc: Tom Manning Subject: Re: [Repeater-Builder] Removing Scotchkote - from the manufacturer To all who may be interested in DB antenna dipole dimensiomsion I have info/ dimsions on all vhf, 220 and uhf band dipoles.Email me off list at de_n3dab at tds dot net and I will forward the info to you. -- Doug N3DAB/WPRX486/WPJL709 Tom Manning [EMAIL PROTECTED] wrote: = Hello Paul Would you do us a favor by making very careful measurements on the antenna and putting the info on the Repeater-Builder group. Several of us would like to modify commercial DB-224 antennas to cover 220Mhz. Skip May and I have attempted to get this done before and have not been successful. Thanks greatly. 73 de Tom Manning, AF4UG - Original Message - From: Paul Finch [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Wednesday, January 23, 2008 9:42 AM Subject: RE: [Repeater-Builder] Removing Scotchkote - from the manufacturer Told us what we already knew! I just got an older 220 MHz DB antenna, before it goes up I will disassemble it and tighten all screws, nuts and terminals, reassemble it and goop with Scotchkoat before going up the tower. I have 8 antennas of my own on my tower and as of December of this year have been up there for 10 years with no problems. Also, I may add, the tower will be paid off in two months! There will be a celebration! Paul -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Bob M. Sent: Wednesday, January 23, 2008 6:48 AM To: repeater-builder@yahoogroups.com Subject: [Repeater-Builder] Removing Scotchkote - from the manufacturer I sent the following request to 3M: What's the proper solvent for removing uncured Scotchkote electrical coating? What can be used to remove cured material from wires or other surfaces? Their reply is below. Hey, it's better than nothing. Thank you for contacting 3M. We don't make solvents to remove Scotchkote and any solvent that is used could damage whatever the Scotchkote is spilled on. For uncured Scotchkote, you might use MEK or Acetone. These solvents are in the uncured Scotchkote so might help to remove it. If it has cured, there isn't any product that we could suggest. Best Regards. 3M Electrical Markets Division Technical Support www.3m.com/electrical All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs Yahoo! Groups Links No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.10/1240 - Release Date: 1/23/2008 5:47 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.10/1240 - Release Date: 1/23/2008 5:47 PM Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) * To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject
[Repeater-Builder] Removing Scotchkote - from the manufacturer
I sent the following request to 3M: What's the proper solvent for removing uncured Scotchkote electrical coating? What can be used to remove cured material from wires or other surfaces? Their reply is below. Hey, it's better than nothing. Thank you for contacting 3M. We don't make solvents to remove Scotchkote and any solvent that is used could damage whatever the Scotchkote is spilled on. For uncured Scotchkote, you might use MEK or Acetone. These solvents are in the uncured Scotchkote so might help to remove it. If it has cured, there isn't any product that we could suggest. Best Regards. 3M Electrical Markets Division Technical Support www.3m.com/electrical All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs
RE: [Repeater-Builder] Removing Scotchkote - from the manufacturer
Told us what we already knew! I just got an older 220 MHz DB antenna, before it goes up I will disassemble it and tighten all screws, nuts and terminals, reassemble it and goop with Scotchkoat before going up the tower. I have 8 antennas of my own on my tower and as of December of this year have been up there for 10 years with no problems. Also, I may add, the tower will be paid off in two months! There will be a celebration! Paul -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Bob M. Sent: Wednesday, January 23, 2008 6:48 AM To: repeater-builder@yahoogroups.com Subject: [Repeater-Builder] Removing Scotchkote - from the manufacturer I sent the following request to 3M: What's the proper solvent for removing uncured Scotchkote electrical coating? What can be used to remove cured material from wires or other surfaces? Their reply is below. Hey, it's better than nothing. Thank you for contacting 3M. We don't make solvents to remove Scotchkote and any solvent that is used could damage whatever the Scotchkote is spilled on. For uncured Scotchkote, you might use MEK or Acetone. These solvents are in the uncured Scotchkote so might help to remove it. If it has cured, there isn't any product that we could suggest. Best Regards. 3M Electrical Markets Division Technical Support www.3m.com/electrical All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs Yahoo! Groups Links No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) * To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Removing Scotchkote - from the manufacturer
Hello Paul Would you do us a favor by making very careful measurements on the antenna and putting the info on the Repeater-Builder group. Several of us would like to modify commercial DB-224 antennas to cover 220Mhz. Skip May and I have attempted to get this done before and have not been successful. Thanks greatly. 73 de Tom Manning, AF4UG - Original Message - From: Paul Finch [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Wednesday, January 23, 2008 9:42 AM Subject: RE: [Repeater-Builder] Removing Scotchkote - from the manufacturer Told us what we already knew! I just got an older 220 MHz DB antenna, before it goes up I will disassemble it and tighten all screws, nuts and terminals, reassemble it and goop with Scotchkoat before going up the tower. I have 8 antennas of my own on my tower and as of December of this year have been up there for 10 years with no problems. Also, I may add, the tower will be paid off in two months! There will be a celebration! Paul -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Bob M. Sent: Wednesday, January 23, 2008 6:48 AM To: repeater-builder@yahoogroups.com Subject: [Repeater-Builder] Removing Scotchkote - from the manufacturer I sent the following request to 3M: What's the proper solvent for removing uncured Scotchkote electrical coating? What can be used to remove cured material from wires or other surfaces? Their reply is below. Hey, it's better than nothing. Thank you for contacting 3M. We don't make solvents to remove Scotchkote and any solvent that is used could damage whatever the Scotchkote is spilled on. For uncured Scotchkote, you might use MEK or Acetone. These solvents are in the uncured Scotchkote so might help to remove it. If it has cured, there isn't any product that we could suggest. Best Regards. 3M Electrical Markets Division Technical Support www.3m.com/electrical All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs Yahoo! Groups Links No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) * To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Removing Scotchkote - from the manufacturer
To all who may be interested in DB antenna dipole dimensiomsion I have info/ dimsions on all vhf, 220 and uhf band dipoles.Email me off list at de_n3dab at tds dot net and I will forward the info to you. -- Doug N3DAB/WPRX486/WPJL709 Tom Manning [EMAIL PROTECTED] wrote: = Hello Paul Would you do us a favor by making very careful measurements on the antenna and putting the info on the Repeater-Builder group. Several of us would like to modify commercial DB-224 antennas to cover 220Mhz. Skip May and I have attempted to get this done before and have not been successful. Thanks greatly. 73 de Tom Manning, AF4UG - Original Message - From: Paul Finch [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Wednesday, January 23, 2008 9:42 AM Subject: RE: [Repeater-Builder] Removing Scotchkote - from the manufacturer Told us what we already knew! I just got an older 220 MHz DB antenna, before it goes up I will disassemble it and tighten all screws, nuts and terminals, reassemble it and goop with Scotchkoat before going up the tower. I have 8 antennas of my own on my tower and as of December of this year have been up there for 10 years with no problems. Also, I may add, the tower will be paid off in two months! There will be a celebration! Paul -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Bob M. Sent: Wednesday, January 23, 2008 6:48 AM To: repeater-builder@yahoogroups.com Subject: [Repeater-Builder] Removing Scotchkote - from the manufacturer I sent the following request to 3M: What's the proper solvent for removing uncured Scotchkote electrical coating? What can be used to remove cured material from wires or other surfaces? Their reply is below. Hey, it's better than nothing. Thank you for contacting 3M. We don't make solvents to remove Scotchkote and any solvent that is used could damage whatever the Scotchkote is spilled on. For uncured Scotchkote, you might use MEK or Acetone. These solvents are in the uncured Scotchkote so might help to remove it. If it has cured, there isn't any product that we could suggest. Best Regards. 3M Electrical Markets Division Technical Support www.3m.com/electrical All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs Yahoo! Groups Links No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1238 - Release Date: 1/22/2008 8:12 PM Yahoo! Groups Links Yahoo! Groups Links
