Re: [Repeater-Builder] Proto boards
Hi Ralph,
Check out the yahoo group, "ecbarter:. I know the guy who started it ("DL").
People trade/swap electronics parts, wire, etc.
73, KD6AAJ
--- On Tue, 7/6/10, Ralph S. Turk wrote:
From: Ralph S. Turk
Subject: [Repeater-Builder] Proto boards
To: "Repeater-Builder"
Date: Tuesday, July 6, 2010, 12:16 PM
#yiv1877049577 p {margin:0;}
Hi All
Looking for small etched, maybe drilled, small boards with layout for
several transistors, resistors etc all isolated pads
Also looking for ones that have layouts for 8pin, 14 pin or 16 pin dip with
isolated pads for hook up
I have some misc of the above and they are great for inverters, buffers,
little op amps for increasing the level of the disc or tx audio.
Any ideas?
Ralph
Re: [Repeater-Builder] Proto boards
Try Nuts & Volts magazine, thy might have what you need. www.nutsvolts.com From: Ralph S. Turk To: Repeater-Builder Sent: Tue, July 6, 2010 2:16:47 PM Subject: [Repeater-Builder] Proto boards Hi All Looking for small etched, maybe drilled, small boards with layout for several transistors, resistors etc all isolated pads Also looking for ones that have layouts for 8pin, 14 pin or 16 pin dip with isolated pads for hook up I have some misc of the above and they are great for inverters, buffers, little op amps for increasing the level of the disc or tx audio. Any ideas? Ralph
Re: [Repeater-Builder] Proto boards
Or: http://www.wa5vjb.com/products4.html 6.5" by 4.25" Large Proto Board $5 3.75" by 2.75" Small Proto Board $3 Kent is also a source of economical built-to-spec preamps. -- mailto:o...@ozindfw.net Oz POB 93167 Southlake, TX 76092 (Near DFW Airport)
Re: [Repeater-Builder] Proto boards
Have used these for years. Vero, Vector, GC, Rat Shack,etc. No what I am looking for is small etched boards with one or two transistors 1-2 inch square. and other pads so you can lay out simple circuits. Same for IC's. I found a few surplus here locally and they worked out great. Ralph - Original Message - From: "Jeff DePolo" To: Repeater-Builder@yahoogroups.com Sent: Tuesday, July 6, 2010 2:32:03 PM Subject: RE: [Repeater-Builder] Proto boards Vector Electronics (Google "vectorbord" and "circbord", not typos), GC Electronics, and Radio Shack (if you can find a store still stocking them). --- Jeff WN3A > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto: Repeater-Builder@yahoogroups.com ] On Behalf Of Ralph S. Turk > Sent: Tuesday, July 06, 2010 3:17 PM > To: Repeater-Builder > Subject: [Repeater-Builder] Proto boards > > > > Hi All > Looking for small etched, maybe drilled, small boards with layout for > several transistors, resistors etc all isolated pads > > Also looking for ones that have layouts for 8pin, 14 pin or > 16 pin dip with > isolated pads for hook up > > I have some misc of the above and they are great for > inverters, buffers, > little op amps for increasing the level of the disc or tx audio. > > Any ideas? > > Ralph > > > >
RE: [Repeater-Builder] Proto boards
Vector Electronics (Google "vectorbord" and "circbord", not typos), GC Electronics, and Radio Shack (if you can find a store still stocking them). --- Jeff WN3A > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ralph S. Turk > Sent: Tuesday, July 06, 2010 3:17 PM > To: Repeater-Builder > Subject: [Repeater-Builder] Proto boards > > > > Hi All > Looking for small etched, maybe drilled, small boards with layout for > several transistors, resistors etc all isolated pads > > Also looking for ones that have layouts for 8pin, 14 pin or > 16 pin dip with > isolated pads for hook up > > I have some misc of the above and they are great for > inverters, buffers, > little op amps for increasing the level of the disc or tx audio. > > Any ideas? > > Ralph > > > >
Re: [Repeater-Builder] Proto boards
At 12:16 PM 7/6/2010, Ralph S. Turk wrote: > > >Hi All >Looking for small etched, maybe drilled, small boards with layout for >several transistors, resistors etc all isolated pads > >Also looking for ones that have layouts for 8pin, 14 pin or 16 pin dip with >isolated pads for hook up > >I have some misc of the above and they are great for inverters, buffers, >little op amps for increasing the level of the disc or tx audio. > >Any ideas? <---Radio Shack has 'em Ken -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!"
