RE: [Repeater-Builder] Re: Manual needed Motorola S-1320A Signal Generator
It works fine for me. You might need a later version of Adobe Reader. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of buggyboy130au Sent: Friday, December 12, 2008 4:22 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Manual needed Motorola S-1320A Signal Generator This link does not appear to be working! --- In Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com , Don Kovalchik - W8DPK w8...@... wrote: Here is a link to the S-1320A service manual: http://mcarcoh.org/S1318-19-20-21-29 http://mcarcoh.org/S1318-19-20-21-29 Signal Generator.pdf It's a pretty large file, about 16MB, but it's very high resolution. I'll leave it on the site for a few weeks. 73, --Don-- W8DPK ,___
RE: [Repeater-Builder] Re: Manual
It's the same manual. When Ericsson took over GE's product line, many of the LBIs were re-issued in a uniform 11 by 17 inch format. Unfortunately, newer is not always better. Some of Ericsson's LBIs do not contain all of the information and/or details found in the older GE versions. Also, Ericsson decided to chop up some of the long foldout schematic diagrams into two or three sections, greatly reducing their usefulness. Worse still, Ericsson reduced some schematics by 50% or more, to fit on an 11 by 17 inch page. You need a magnifying glass to read such schematics! 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Randy Sent: Saturday, December 29, 2007 9:24 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Manual According to another source, the LBI-4100 is not the one I need, but the LBI-4938C is. . . . In Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com , Randy [EMAIL PROTECTED] wrote: Anyone know where I can obtain the manual for GE LBI #4100 ? It is not found in: The 'Mastr' Index of GE LBI's
Re: [Repeater-Builder] Re: Manual for MSR2000
Ok, that narrows it down a bit. Neil - WA6KLA n9wys wrote: I'm also looking for the receiver section of the manual for a UHF MSR2000. I'm willing to pay for postage, copying, etc. Mark - N9WYS --- In Repeater-Builder@yahoogroups.com, Neil McKie [EMAIL PROTECTED] wrote: Please remember ... there are two (2) manuals ... one for the RF section and one of the control / applications section. The RF section you need will depend on the radio frequency band of the radio you have - ie: 136 - 174 MHz or 406 - 512 MHz. Hope this helps, Neil - WA6KLA Paul Guello wrote: Anyone out there in repeater land have a manual they could spare or share for a MSR2000? Or know where one is available? Paul, kb9wlc Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/