Joe ~
Your address won't work on the USPS shipping label - it says that the address is wrong. I looked you up on QRZ, and it has a different address for you - WA7JAW CARL T BURKLEO 1050 1/2 N JUNIPER ST COQUILLE, OR 97423 USA I'm about to try this address to see if the USPS shipping label will accept it - What's the deal? Bill _____ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Joe Burkleo Sent: Thursday, February 26, 2009 10:39 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Needed 88.5 Micor PL Reeds Eric and Bill, Thanks for the reply and help. You are both correct in that some of the reeds will not work in all applications. My application, which I should have specified is in a Micor factory repeater station. The station PL decoder and encoder boards that I have will accept either the fat or thin reeds. Eric, thanks for keeping me honest here, as you are such a wealth of knowledge on these radios, and your posts are always so informative to read. Thanks everyone for all of the reply's and help. Joe - WA7JAW --- In Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> yahoogroups.com, "Bill Hudson" <w6...@...> wrote: > > Eric, > > > > The "thin" one is the vibrasender "sender" as in transmit - and it is a > TLN6824a > > > > The "fat" one is the vibrasponder "responds or rx the PL tone" - and it's a > TLN8381A > > > > This is always the case, and they are not interchangeable between transmit > and receive. > > > > The 88.5 PL frequency is referred to as YB. > > > > I looked in my box of reeds and found two Vibrasponders (TLN8381A) for him, > and emailed him directly as he requested. > > > > I don't have any Vibrasenders (TLN6824A) with that tone, so he's still > looking. > > > > Bill Hudson - "ex-Mo" - Graduation class of 1983 - W6CBS. > > > > _____ > > From: Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> yahoogroups.com > [mailto:Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> yahoogroups.com] On Behalf Of Eric Lemmon > Sent: Thursday, February 26, 2009 6:28 PM > To: Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> yahoogroups.com > Subject: RE: [Repeater-Builder] Needed 88.5 Micor PL Reeds > > > > Joe, > > You should be specific about your needs. Some Micor reeds are thin and some > are fat- and won't fit in some radios. What part numbers do you need? > > 73, Eric Lemmon WB6FLY > > > -----Original Message----- > From: Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> > yahoogroups.com > [mailto:Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> > yahoogroups.com] On Behalf Of Joe Burkleo > Sent: Wednesday, February 25, 2009 10:53 PM > To: Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> > yahoogroups.com > Subject: [Repeater-Builder] Needed 88.5 Micor PL Reeds > > Hello, > I am in need of a couple sets of 88.5 Micor series sponders and senders. > I do have several other tones in my reed collection to trade or let me > know what you want for them. > > Please email me privately off the list if you have anything. > > Thanks, > Joe - WA7JAW >
