Re: [Repeater-Builder] IFR Monitor Repair Charges
I have a IFR 1200 that the power supply seems to have gone out.. anyone know someone that can repair this. thanks --- Tommie Taylor Lampasas Skywarn Weather Repeater 145.330- 162.2T (SWLynx) / 444.875+ 88.5 (Echolink) http://www.a1cmugs.com WEEKLY "CENTRAL TEXAS STORM SPOTTERS" Net TUESDAY EVENINGS AT 7PMCST ON REPEATER ABOVE AND ECHOLINK VoiceOverIP NODE#28689/28821 - Original Message - From: "Steve S. Bosshard (NU5D)" <[EMAIL PROTECTED]> To: Sent: Tuesday, April 27, 2004 6:43 AM Subject: RE: [Repeater-Builder] IFR Monitor Repair Charges > Same deal with large LMR factory depot - flat rate for one problem - more > problems MORE $$$s. > > Steve > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] IFR Monitor Repair Charges
John, I don't know. I believe the calibration fees are pretty uniform, but the repair figures I quoted were based on the IFR-1200S. In my one personal experience, IFR fixed three separate problems for $700. The problems I reported were a periodic unlocking of the synthesizer and a regular fluctuation of the frequency error meter of about 27 Hz. Both of these problems were fixed, along with a bad regulator/filter board in the power supply that was found while troubleshooting. Judging from the other postings, I got off easy! 73, Eric Lemmon WB6FLY John Sichert wrote: > > Eric, > > Are the repair rates model specific? > > Thanks > John > > At 01:04 AM 4/27/04, you wrote: > >I received the following statement from Aeroflex/IFR this morning, > >regarding their current fees: > > > >"The current fee for a non-traceable calibration is $250.00 and a NIST > >calibration is $500.00. The flat-rate repair includes one major repair > >and a non-traceable calibration for $1,275.00. The flat-rate repair > >includes one major repair and an NIST calibration for $1,525.00. Please > >note that if more than one repair is needed, the price will be based on > >a time and material charge." > > > >73, Eric Lemmon WB6FLY > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] IFR Monitor Repair Charges
Same deal with large LMR factory depot - flat rate for one problem - more problems MORE $$$s. Steve Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] IFR Monitor Repair Charges
Not quite what most would call flat rate repair. Not hourly either, seems like a Vegas crap shoot where everyone but the dealer is a loser. You get to pay a lump sum to avoid a hourly rate but if you have a lot of problems you get to pay the hourly rate also but then again if you don't have a major problem you still lose out since you just paid flat rate for something minor! I just don't get it... Rich -Original Message- From: Eric Lemmon [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 27, 2004 1:05 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] IFR Monitor Repair Charges I received the following statement from Aeroflex/IFR this morning, regarding their current fees: "The current fee for a non-traceable calibration is $250.00 and a NIST calibration is $500.00. The flat-rate repair includes one major repair and a non-traceable calibration for $1,275.00. The flat-rate repair includes one major repair and an NIST calibration for $1,525.00. Please note that if more than one repair is needed, the price will be based on a time and material charge." 73, Eric Lemmon WB6FLY Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] IFR Monitor Repair Charges
Eric, Are the repair rates model specific? Thanks John At 01:04 AM 4/27/04, you wrote: >I received the following statement from Aeroflex/IFR this morning, >regarding their current fees: > >"The current fee for a non-traceable calibration is $250.00 and a NIST >calibration is $500.00. The flat-rate repair includes one major repair >and a non-traceable calibration for $1,275.00. The flat-rate repair >includes one major repair and an NIST calibration for $1,525.00. Please >note that if more than one repair is needed, the price will be based on >a time and material charge." > >73, Eric Lemmon WB6FLY > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/