date:20180228

Re: [RDD] Guidance on remote machine access

2018-02-28 Thread ijames

Thanks
We would like to make a copy of Our databases I have not been able to
to that also
I was thinking about installing PhPmyadmin. But I really don't what to
add alot of stuff to the server to bog it down. Do you have a solution
for Making a copy of the databases and The Var/snd directories

On 2018-02-28 13:10, Bill Putney wrote:

James,

We use rsync to sync the /var/snd directories in our servers. Syncing
the databases is a little more complicated. If you have the network
bandwidth, running a single primary database would be best. Make all
they quires to that database. You can do a daily snapshot of the
database to keep the standby database server mostly up to date in case
of a complete network failure. Also, since Fred implemented keeping a
checksum of the audio files in the database, I'd run a periodic
consistency check to make sure there hasn't been any corruption in the
audio files.

There are a couple ways to set up the firewalls with respect to
network traffic that isn't between VPN connected sites. One is to
allow each site access to the Internet for non-associated sites and
only run the site to site traffic over the VPN. That gives sites the
fastest access to non-associated Internet sites. The other way is to
send all the traffic of a subsidiary site back to the main site before
it goes out on the Internet to non-associated sites. That is a choice
that is made for various reasons. The main site might have better
restriction controls for Internet access. Their may be a concern about
an attack that traffic analysis would play a part in. You can exercise
QOS based prioritization if all the traffic going to and from a site
is kept within the VPN. Traffic presented to the public Internet
doesn't carry QOS so incoming traffic could delay database responses
or any live audio you might be transporting.

Bill Putney - WB6RFW

District 2 Commissioner - Port of Port Townsend
Chief Engineer - KPTZ
El Jefe de Contenido - Port Townsend Film Festival
Private Pilot-Single Engine Land | Airframe & Powerplant / Inspection
Authorization

On 2/27/18 9:37 PM, ija...@jamcorbroadcast.com wrote:

Bill

Thanks for bringing this subject on the Forum. we have a similar
situation and we are looking to have some solution. Maybe you want to
have your edge router setup VPN for your Rivendell So you will have
access like the machine is in your current location. I think You have
can the edge routers ignor any traffic except the addressees you list
in the firewall.

James I am interested how you have the 2 rivendell's synced. we are
getting ready to build a master server and playout Can you Sen me some
info on how you did your 2 servers to work together.

Thanks

On 2018-02-05 10:47, Bill Putney wrote:

you use that interfaces the Internet.
Bill Putney - WB6RFW
District 2 Commissioner - Port of Port Townsend
Chief Engineer - KPTZ
El Jefe de Contenido - Port Townsend Film Festival
Private Pilot-Single Engine Land | Airframe & Powerplant / Inspection
Authorization

On 2/5/18 3:48 AM, Andy Higginson wrote:

This is probably going off at a slight tangent but

I was looking at Ubiquiti EdgeRouters over the weekend. They might
be an interesting option for getting things up and running for VPN
work. It is often said that you should keep your office network and
music network separate. However, if you are trying to access the
Rivendell machines remotely, you need to have internet access to
them, even if it is through a VPN. The Edgerouters (even the
cheapest model the lite) have multiple subnets and routing on them.
The lite comes with 3 ports - eth0 for the WAN, eth1 for LAN
192.168.101.x and eth2 for LAN 192.168.102.x. Now I don't know what
routing it does between ports eth1 and eth2 but it does seem to me
that you could use this to allow both of the station networks to
access the internet via this router. It also has the ability to run
a VPN as well so you should be able to access the Music network from
the outside world. How well they run and how they would perform in
this context is not something that I would know. However I would be
interested if anyone has some input.

https://www.ubnt.com/edgemax/edgerouter-lite/

https://www.smallnetbuilder.com/lanwan/lanwan-reviews/33111-ubiquiti-edgerouter-lite-revisited

Of course, one of the things with getting a VPN up and running is
that you could use this for storing a remote off site backup with a
NAS drive. That's something for another discussion.

Andy

On Mon, 05 Feb 2018 10:06:45 + JAMES GREENLEE
wrote

Isn't this what the

Re: [RDD] Guidance on remote machine access

2018-02-28 Thread Bill Putney

James,

There are a couple ways to set up the firewalls with respect to network
traffic that isn't between VPN connected sites. One is to allow each
site access to the Internet for non-associated sites and only run the
site to site traffic over the VPN. That gives sites the fastest access
to non-associated Internet sites. The other way is to send all the
traffic of a subsidiary site back to the main site before it goes out on
the Internet to non-associated sites. That is a choice that is made for
various reasons. The main site might have better restriction controls
for Internet access. Their may be a concern about an attack that traffic
analysis would play a part in. You can exercise QOS based prioritization
if all the traffic going to and from a site is kept within the VPN.
Traffic presented to the public Internet doesn't carry QOS so incoming
traffic could delay database responses or any live audio you might be
transporting.

Bill Putney - WB6RFW

On 2/27/18 9:37 PM, ija...@jamcorbroadcast.com wrote:

Bill

James I am interested how you have the 2 rivendell's synced. we are
getting ready to build a master server and playout Can you Sen me some
info on how you did your 2 servers to work together.

Thanks

On 2018-02-05 10:47, Bill Putney wrote:

We use PFSense software on PC hardware. PFSense implements several
different VPN arrangements but we are using IP/SEC since it is one of
the very few that hasn't been hacked. Some one I know was looking at
Ubiquiti Cloud Key remote and I did a search for exploits and it has
been listed as having "Critical" level hacks. Not sure about their
edge routers but you should search for exploits for whatever equipment
you use that interfaces the Internet.
Bill Putney - WB6RFW
District 2 Commissioner - Port of Port Townsend
Chief Engineer - KPTZ
El Jefe de Contenido - Port Townsend Film Festival
Private Pilot-Single Engine Land | Airframe & Powerplant / Inspection
Authorization

On 2/5/18 3:48 AM, Andy Higginson wrote:

This is probably going off at a slight tangent but

https://www.ubnt.com/edgemax/edgerouter-lite/

https://www.smallnetbuilder.com/lanwan/lanwan-reviews/33111-ubiquiti-edgerouter-lite-revisited

Of course, one of the things with getting a VPN up and running is
that you could use this for storing a remote off site backup with a
NAS drive. That's something for another discussion.

Andy

On Mon, 05 Feb 2018 10:06:45 + JAMES GREENLEE
wrote

Isn't this what the Server/Client model is all about?

In our deployment, our main studio is located in another town from
the owner and myself. There's a "server" at the main studio (which
is also the active RDAirPlay host), and workstations at both my
location and the owners location. All of our networks (two home
locations, the main s

[RDD] RD Catch

2018-02-28 Thread ijames



I am trying to configure RD catch to look at a folder or Dropbox Account
We have an internal server its a shared server. I get an error UrL not 
supported on the shared

server
* when I used the SMB// Local Address. -   Error Supported Protocal
* when I used the http// Local Address. - Invalid address
* With DropBox it  does Not  do anything.
 Can any one tellme what is the proper naming convention
 it should be smb// Local address - how do you set up the wild card and 
the properwayto set up the file name in the RD Catch


Thanks
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] Still no sound from soundcard after video card swap

2018-02-28 Thread Cowboy

On Wed, 28 Feb 2018 11:06:46 -0500
Rich Gattie  wrote:

> Sorry for starting another thread.. but I have been trying to figure this
> out and it's driving me mad...

 There are very good reasons for making backups.

 What I would do now, if I was you, is to remove the new super-whiz-bang
 and go back to the barely-adequate.
 Make it work, then copy the configs to a safe place.

-- 
Cowboy

There's two theories about arguing with a woman.
 Neither one works.

___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] Still no sound from soundcard after video card swap

2018-02-28 Thread Rich Gattie

On Wed, Feb 28, 2018 at 11:33 AM, Andy Higginson  wrote:

> Sorry if this is wrong.  Just a few musings over this.
>
> 1) Could you please do an aplay -l for us.
> 2) (this may be wrong), Rivendell does not run under the logged in user
> but under the rivendell user.  Therefore if something is under your home
> directory, it is not a system wide thing (didn't quite come out right -
> brain is tired).  Therefore, you need to be running with the asound.conf
> file in /etc.  Have you tried running rdalsaconfig as a sudo user?
>
> Probably totally the wrong direction but with a shot.
>
> Andy
>
>
>
Yes, I did sudo rdalsaconfig, and the asound.conf file in /etc is empty..

And when it exits, it says...

Home directory /home/mobbyg not ours.

And I ran it as sudo from the /etc/ directory...

Here is aplay -l


aplay -l

 List of PLAYBACK Hardware Devices 

card 0: CA0106 [CA0106], device 0: ca0106 [CA0106]

  Subdevices: 0/1

  Subdevice #0: subdevice #0

card 0: CA0106 [CA0106], device 1: ca0106 [CA0106]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 0: CA0106 [CA0106], device 2: ca0106 [CA0106]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 0: CA0106 [CA0106], device 3: ca0106 [CA0106]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 1: Audigy2 [SB Audigy 2 Value [SB0400]], device 0: emu10k1 [ADC
Capture/Standard PCM Playback]

  Subdevices: 31/32

  Subdevice #0: subdevice #0

  Subdevice #1: subdevice #1

  Subdevice #2: subdevice #2

  Subdevice #3: subdevice #3

  Subdevice #4: subdevice #4

  Subdevice #5: subdevice #5

  Subdevice #6: subdevice #6

  Subdevice #7: subdevice #7

  Subdevice #8: subdevice #8

  Subdevice #9: subdevice #9

  Subdevice #10: subdevice #10

  Subdevice #11: subdevice #11

  Subdevice #12: subdevice #12

  Subdevice #13: subdevice #13

  Subdevice #14: subdevice #14

  Subdevice #15: subdevice #15

  Subdevice #16: subdevice #16

  Subdevice #17: subdevice #17

  Subdevice #18: subdevice #18

  Subdevice #19: subdevice #19

  Subdevice #20: subdevice #20

  Subdevice #21: subdevice #21

  Subdevice #22: subdevice #22

  Subdevice #23: subdevice #23

  Subdevice #24: subdevice #24

  Subdevice #25: subdevice #25

  Subdevice #26: subdevice #26

  Subdevice #27: subdevice #27

  Subdevice #28: subdevice #28

  Subdevice #29: subdevice #29

  Subdevice #30: subdevice #30

  Subdevice #31: subdevice #31

card 1: Audigy2 [SB Audigy 2 Value [SB0400]], device 2: emu10k1 efx
[Multichannel Capture/PT Playback]

  Subdevices: 8/8

  Subdevice #0: subdevice #0

  Subdevice #1: subdevice #1

  Subdevice #2: subdevice #2

  Subdevice #3: subdevice #3

  Subdevice #4: subdevice #4

  Subdevice #5: subdevice #5

  Subdevice #6: subdevice #6

  Subdevice #7: subdevice #7

card 1: Audigy2 [SB Audigy 2 Value [SB0400]], device 3: emu10k1
[Multichannel Playback]

  Subdevices: 1/1

  Subdevice #0: subdevice #0



-- 
-=:{ Rich Gattie, KB2MOB }:=-
Email: mob...@gmail.com
Blog: http://xjockalbanyny.com
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] Still no sound from soundcard after video card swap

2018-02-28 Thread Andy Higginson

Sorry if this is wrong.  Just a few musings over this.



1) Could you please do an aplay -l for us.

2) (this may be wrong), Rivendell does not run under the logged in user but 
under the rivendell user.  Therefore if something is under your home directory, 
it is not a system wide thing (didn't quite come out right - brain is tired).  
Therefore, you need to be running with the asound.conf file in /etc.  Have you 
tried running rdalsaconfig as a sudo user?



Probably totally the wrong direction but with a shot.



Andy







 On Wed, 28 Feb 2018 16:06:46 + Rich Gattie  
wrote 




Sorry for starting another thread.. but I have been trying to figure this out 
and it's driving me mad...





Swapped out a 64MB video card for a 1G video card which has HDMI, it took over 
the audio. I figured out it was the HDMI and blacklisted the HDMI driver in 
/etc/modprobe.d/blacklist.conf:





blacklist snd_hda_intel



Now one of my 2 Soundblasters are working.




Audigy SE (CA0106) and Audigy2 (emk10k1 I think is the driver)





Anyways, I have everything enabled in rdalsaconfig, but the asound.conf file in 
/etc is empty...





#Lines below here added for more than 1 soundcard uncomment as required







# *** Start of Rivendell configuration generated by rdalsaconfig(1) ***

# *** End of Rivendell configuration generated by rdalsaconfig(1) ***






But I have cards in the asound.conf in my home directory...



cat asound.conf

pcm.rd0 {

  type hw

  card 0

}

ctl.rd0 {

  type hw

  card 0

}



#Lines below here added for more than 1 soundcard uncomment as required

pcm.rd1 {

  type hw

  card 1

}

ctl.rd1 {

  type hw

  card 1

}



pcm.rd2 {

  type hw

  card 2

}

ctl.rd2 {

  type hw

  card 2

}



pcm.rd3 {

  type hw

  card 3

}

ctl.rd3 {

  type hw

  card 3

}






While the system sees only 1 input and 1 output on both cards, each is capable 
of multiple analouge outputs. I just cant remember how I did it and can't find 
my notes... but I digress.. 

The Audigy2 is able to play out as my stream is back up, but the SE is not 
working at all, which is the one I use in studio for production. 



Any suggestions on what I can try? Kinda feeling lost here... 



Thanks in advanced...







-- 

-=:{ Rich Gattie, Host of Geek Show Radio }:=-

-=:{ X1 - The Capital Region's Online Rock }:=-




Email: mob...@gmail.com

Blog: http://x1radio.net


Stream: http://listen.x1radio.net







___

Rivendell-dev mailing list 

Rivendell-dev@lists.rivendellaudio.org 

http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev 






___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

[RDD] Still no sound from soundcard after video card swap

2018-02-28 Thread Rich Gattie

Sorry for starting another thread.. but I have been trying to figure this
out and it's driving me mad...


Swapped out a 64MB video card for a 1G video card which has HDMI, it took
over the audio. I figured out it was the HDMI and blacklisted the HDMI
driver in /etc/modprobe.d/blacklist.conf:

blacklist snd_hda_intel

Now one of my 2 Soundblasters are working.

Audigy SE (CA0106) and Audigy2 (emk10k1 I think is the driver)


Anyways, I have everything enabled in rdalsaconfig, but the asound.conf
file in /etc is empty...

#Lines below here added for more than 1 soundcard uncomment as required




# *** Start of Rivendell configuration generated by rdalsaconfig(1) ***

# *** End of Rivendell configuration generated by rdalsaconfig(1) ***


But I have cards in the asound.conf in my home directory...

cat asound.conf

pcm.rd0 {

  type hw

  card 0

}

ctl.rd0 {

  type hw

  card 0

}


#Lines below here added for more than 1 soundcard uncomment as required

pcm.rd1 {

  type hw

  card 1

}

ctl.rd1 {

  type hw

  card 1

}


pcm.rd2 {

  type hw

  card 2

}

ctl.rd2 {

  type hw

  card 2

}


pcm.rd3 {

  type hw

  card 3

}

ctl.rd3 {

  type hw

  card 3

}


While the system sees only 1 input and 1 output on both cards, each is
capable of multiple analouge outputs. I just cant remember how I did it and
can't find my notes... but I digress..
The Audigy2 is able to play out as my stream is back up, but the SE is not
working at all, which is the one I use in studio for production.

Any suggestions on what I can try? Kinda feeling lost here...

Thanks in advanced...



-- 
-=:{ Rich Gattie, Host of Geek Show Radio }:=-
-=:{ X1 - The Capital Region's Online Rock }:=-

Email: mob...@gmail.com
Blog: http://x1radio.net
Stream: http://listen.x1radio.net
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] Guidance on remote machine access

Re: [RDD] Guidance on remote machine access

[RDD] RD Catch

Re: [RDD] Still no sound from soundcard after video card swap

Re: [RDD] Still no sound from soundcard after video card swap

Re: [RDD] Still no sound from soundcard after video card swap

[RDD] Still no sound from soundcard after video card swap

7 matches

Site Navigation

Mail list logo

Footer information