Re: [RDD] RDXport / Recording Issues Centos7

[Workino]

Hello,
For point 2 double check the nfs export on server for directory /var/snd and 
how u have mounted on client side ( mount |grep snd )

For point 3 check the user u are using to connect to the database what 
permission have on database server. 

If I can send some log output 

Workino 

Sent from my iPhone

> On 24 Dec 2018, at 15:37, Edmer Archila  
> wrote:
> 
> Hi,
> 
> I have a Dell R610 that I’m using as the Rivendell Server. Attached to that 
> over LAN is an HP PC with an ASI 6114 Audio Card. 
> 
> I also have a secondary PC that is VPN from a building 15 miles away.
> 
> All systems were installed with CentOS 7 and properly installed following the 
> Centos/RHEL 7 sheet from the Paravel Systems website.
> 
> I have multiple problems with the system (RDLibrary). I am new to Linux and 
> am not sure where to start troubleshooting.
> 
> 1. Audio Static - Every few seconds in the recording of an audio cut, Audio 
> gets replaced completely by static. After a few seconds, I get audio back. I 
> am getting this result consistently with the local machine and the remote 
> machine. The server has no audio cards, but I may try recording using a 
> Creative Soundblaster USB Card.
> 
> 2. RDXport - While trying to get into “Edit Markers” in RDLibrary, I get the 
> following error. Unable to download peak data, error was “RDXport.service 
> returned an error”. Most of the terminal commands that were used and 
> mentioned in previous emails on this mailing list do not apply to CentOS 7. 
> This is also consistent on the local and remote client machines. The server 
> is able to get the waveform ok.
> 
> 3. Database Access - Read/Write/Deletion - Although the Client Machines can 
> write files as well as modify into the library, I cannot delete them or get 
> the Hours Remaining information at the bottom of RDLibrary window. The server 
> appears to be working fine when doing all of this.
> 
> I’m beginning to think there is a permissions issue, but again, I am a newbie 
> to Linux.
> 
> Thanks!
> Edmer Archila
> Engineer, Studio A
> Media Communications and Journalism
> 
> www.edmerarchila.com
> 
> 
> 
> 
> 
> 
> 
> ___
> Rivendell-dev mailing list
> Rivendell-dev@lists.rivendellaudio.org
> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Edmer Archila]

10.2.10.14:/var/snd on /var/snd type nfs4 
(rw,realitime,vers-4.1,rsize1048576,wsize=1-48576,namelen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=10.2.10.15,local_lock=none,addr=10.2.10.14

The addresses are local to LAN. They were first issued by DHCP and then made 
into fixed addresses on the router.

SND shows up as red in terminal.

Edmer Archila
Engineer, Studio A
Media Communications and Journalism

www.edmerarchila.com








> On Dec 24, 2018, at 9:05 AM, Workino  wrote:
> 
> Hello,
> For point 2 double check the nfs export on server for directory /var/snd and 
> how u have mounted on client side ( mount |grep snd )
> 
> For point 3 check the user u are using to connect to the database what 
> permission have on database server. 
> 
> If I can send some log output 
> 
> Workino 
> 
> Sent from my iPhone
> 
> On 24 Dec 2018, at 15:37, Edmer Archila  > wrote:
> 
>> Hi,
>> 
>> I have a Dell R610 that I’m using as the Rivendell Server. Attached to that 
>> over LAN is an HP PC with an ASI 6114 Audio Card. 
>> 
>> I also have a secondary PC that is VPN from a building 15 miles away.
>> 
>> All systems were installed with CentOS 7 and properly installed following 
>> the Centos/RHEL 7 sheet from the Paravel Systems website.
>> 
>> I have multiple problems with the system (RDLibrary). I am new to Linux and 
>> am not sure where to start troubleshooting.
>> 
>> 1. Audio Static - Every few seconds in the recording of an audio cut, Audio 
>> gets replaced completely by static. After a few seconds, I get audio back. I 
>> am getting this result consistently with the local machine and the remote 
>> machine. The server has no audio cards, but I may try recording using a 
>> Creative Soundblaster USB Card.
>> 
>> 2. RDXport - While trying to get into “Edit Markers” in RDLibrary, I get the 
>> following error. Unable to download peak data, error was “RDXport.service 
>> returned an error”. Most of the terminal commands that were used and 
>> mentioned in previous emails on this mailing list do not apply to CentOS 7. 
>> This is also consistent on the local and remote client machines. The server 
>> is able to get the waveform ok.
>> 
>> 3. Database Access - Read/Write/Deletion - Although the Client Machines can 
>> write files as well as modify into the library, I cannot delete them or get 
>> the Hours Remaining information at the bottom of RDLibrary window. The 
>> server appears to be working fine when doing all of this.
>> 
>> I’m beginning to think there is a permissions issue, but again, I am a 
>> newbie to Linux.
>> 
>> Thanks!
>> Edmer Archila
>> Engineer, Studio A
>> Media Communications and Journalism
>> 
>> www.edmerarchila.com 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ___
>> Rivendell-dev mailing list
>> Rivendell-dev@lists.rivendellaudio.org 
>> 
>> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev 
>> 

___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Edmer Archila]

Ok. I think I resolved my own problem.

This is an issue of Wrong IP / Wrong Hosts HTTP XPort profile.

I did move the server from my testbed IP to production and forgot to update the 
IP address of the server host in RDAdmin.

As for the clients, I needed to have selected rdserv0 as the access point for 
the clients to connect to.

I’ll give the audio stuff a check and will get back to you

HAPPY HOLIDAYS
Otherwise, HAPPY FESTIVUS!
Edmer Archila
Engineer, Studio A
Media Communications and Journalism

Mobile: (559) 994-9474
www.edmerarchila.com

Member RTDNA







> On Dec 24, 2018, at 9:05 AM, Workino  wrote:
> 
> Hello,
> For point 2 double check the nfs export on server for directory /var/snd and 
> how u have mounted on client side ( mount |grep snd )
> 
> For point 3 check the user u are using to connect to the database what 
> permission have on database server. 
> 
> If I can send some log output 
> 
> Workino 
> 
> Sent from my iPhone
> 
> On 24 Dec 2018, at 15:37, Edmer Archila  > wrote:
> 
>> Hi,
>> 
>> I have a Dell R610 that I’m using as the Rivendell Server. Attached to that 
>> over LAN is an HP PC with an ASI 6114 Audio Card. 
>> 
>> I also have a secondary PC that is VPN from a building 15 miles away.
>> 
>> All systems were installed with CentOS 7 and properly installed following 
>> the Centos/RHEL 7 sheet from the Paravel Systems website.
>> 
>> I have multiple problems with the system (RDLibrary). I am new to Linux and 
>> am not sure where to start troubleshooting.
>> 
>> 1. Audio Static - Every few seconds in the recording of an audio cut, Audio 
>> gets replaced completely by static. After a few seconds, I get audio back. I 
>> am getting this result consistently with the local machine and the remote 
>> machine. The server has no audio cards, but I may try recording using a 
>> Creative Soundblaster USB Card.
>> 
>> 2. RDXport - While trying to get into “Edit Markers” in RDLibrary, I get the 
>> following error. Unable to download peak data, error was “RDXport.service 
>> returned an error”. Most of the terminal commands that were used and 
>> mentioned in previous emails on this mailing list do not apply to CentOS 7. 
>> This is also consistent on the local and remote client machines. The server 
>> is able to get the waveform ok.
>> 
>> 3. Database Access - Read/Write/Deletion - Although the Client Machines can 
>> write files as well as modify into the library, I cannot delete them or get 
>> the Hours Remaining information at the bottom of RDLibrary window. The 
>> server appears to be working fine when doing all of this.
>> 
>> I’m beginning to think there is a permissions issue, but again, I am a 
>> newbie to Linux.
>> 
>> Thanks!
>> Edmer Archila
>> Engineer, Studio A
>> Media Communications and Journalism
>> 
>> www.edmerarchila.com 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ___
>> Rivendell-dev mailing list
>> Rivendell-dev@lists.rivendellaudio.org 
>> 
>> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev 
>> 

___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Tom Van Gorkom]

What's the status of SElinux? It needs to be disabled.

On Mon, Dec 24, 2018, 11:05 AM Workino  Hello,
> For point 2 double check the nfs export on server for directory /var/snd
> and how u have mounted on client side ( mount |grep snd )
>
> For point 3 check the user u are using to connect to the database what
> permission have on database server.
>
> If I can send some log output
>
> Workino
>
> Sent from my iPhone
>
> On 24 Dec 2018, at 15:37, Edmer Archila 
> wrote:
>
> Hi,
>
> I have a Dell R610 that I’m using as the Rivendell Server. Attached to
> that over LAN is an HP PC with an ASI 6114 Audio Card.
>
> I also have a secondary PC that is VPN from a building 15 miles away.
>
> All systems were installed with CentOS 7 and properly installed following
> the Centos/RHEL 7 sheet from the Paravel Systems website.
>
> I have multiple problems with the system (RDLibrary). I am new to Linux
> and am not sure where to start troubleshooting.
>
> 1. Audio Static - Every few seconds in the recording of an audio cut,
> Audio gets replaced completely by static. After a few seconds, I get audio
> back. I am getting this result consistently with the local machine and the
> remote machine. The server has no audio cards, but I may try recording
> using a Creative Soundblaster USB Card.
>
> 2. RDXport - While trying to get into “Edit Markers” in RDLibrary, I get
> the following error. Unable to download peak data, error was
> “RDXport.service returned an error”. Most of the terminal commands that
> were used and mentioned in previous emails on this mailing list do not
> apply to CentOS 7. This is also consistent on the local and remote client
> machines. The server is able to get the waveform ok.
>
> 3. Database Access - Read/Write/Deletion - Although the Client Machines
> can write files as well as modify into the library, I cannot delete them or
> get the Hours Remaining information at the bottom of RDLibrary window. The
> server appears to be working fine when doing all of this.
>
> I’m beginning to think there is a permissions issue, but again, I am a
> newbie to Linux.
>
> Thanks!
> *Edmer Archila*
> Engineer, Studio A
> Media Communications and Journalism
>
> www.edmerarchila.com
>
>
>
>
>
>
>
> ___
> Rivendell-dev mailing list
> Rivendell-dev@lists.rivendellaudio.org
> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>
> ___
> Rivendell-dev mailing list
> Rivendell-dev@lists.rivendellaudio.org
> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Workino]

U can easily find if that is the problem opening a terminal and run rdlibrary 
from shell. If u see some sql error is host configuration problem. But anyway 
if u have any kind of problem try to execute the command in a terminal. I can 
have a better output of the error

Regards
Gabriele

Sent from my iPhone

> On 24 Dec 2018, at 21:25, Tom Van Gorkom  wrote:
> 
> What's the status of SElinux? It needs to be disabled.
> 
>> On Mon, Dec 24, 2018, 11:05 AM Workino > Hello,
>> For point 2 double check the nfs export on server for directory /var/snd and 
>> how u have mounted on client side ( mount |grep snd )
>> 
>> For point 3 check the user u are using to connect to the database what 
>> permission have on database server. 
>> 
>> If I can send some log output 
>> 
>> Workino 
>> 
>> Sent from my iPhone
>> 
>>> On 24 Dec 2018, at 15:37, Edmer Archila  
>>> wrote:
>>> 
>>> Hi,
>>> 
>>> I have a Dell R610 that I’m using as the Rivendell Server. Attached to that 
>>> over LAN is an HP PC with an ASI 6114 Audio Card. 
>>> 
>>> I also have a secondary PC that is VPN from a building 15 miles away.
>>> 
>>> All systems were installed with CentOS 7 and properly installed following 
>>> the Centos/RHEL 7 sheet from the Paravel Systems website.
>>> 
>>> I have multiple problems with the system (RDLibrary). I am new to Linux and 
>>> am not sure where to start troubleshooting.
>>> 
>>> 1. Audio Static - Every few seconds in the recording of an audio cut, Audio 
>>> gets replaced completely by static. After a few seconds, I get audio back. 
>>> I am getting this result consistently with the local machine and the remote 
>>> machine. The server has no audio cards, but I may try recording using a 
>>> Creative Soundblaster USB Card.
>>> 
>>> 2. RDXport - While trying to get into “Edit Markers” in RDLibrary, I get 
>>> the following error. Unable to download peak data, error was 
>>> “RDXport.service returned an error”. Most of the terminal commands that 
>>> were used and mentioned in previous emails on this mailing list do not 
>>> apply to CentOS 7. This is also consistent on the local and remote client 
>>> machines. The server is able to get the waveform ok.
>>> 
>>> 3. Database Access - Read/Write/Deletion - Although the Client Machines can 
>>> write files as well as modify into the library, I cannot delete them or get 
>>> the Hours Remaining information at the bottom of RDLibrary window. The 
>>> server appears to be working fine when doing all of this.
>>> 
>>> I’m beginning to think there is a permissions issue, but again, I am a 
>>> newbie to Linux.
>>> 
>>> Thanks!
>>> Edmer Archila
>>> Engineer, Studio A
>>> Media Communications and Journalism
>>> 
>>> www.edmerarchila.com
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> ___
>>> Rivendell-dev mailing list
>>> Rivendell-dev@lists.rivendellaudio.org
>>> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>> ___
>> Rivendell-dev mailing list
>> Rivendell-dev@lists.rivendellaudio.org
>> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Lorne Tyndale]

Hi,

Usually the RDXport errors have to do with Apache not set up correctly. 
Do you have CGI enabled in Apache?  Is the needed apache configuration
file installed/enabled?




> 
> I'm trying to create a demo for Rivendell, and the problems that I'm having
> is importing with the following:
> 1. RDXport and Import Error Audio Converter Error: OK
> 2. Unable to delete audio!
> How can I fix this?
> I tried changing the IP addresses in RDAdmin from what it was to 127.0.0.1
> and then changed the rd.conf from localhost to 127.0.0.1
> What else should I do?
> I'm creating this in VirtualBox and VMWare
> Thanks in advanced!!!___
> Rivendell-dev mailing list
> Rivendell-dev@lists.rivendellaudio.org
> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Jacob Niemand]

Have you disabled SELinux?  I’ve had issues with it blocking RD Library
actions.

SELinux disable: su setenforce 0


/etc/selinux/config file to set the  SELINUX parameter to  disabled, and
then reboot the server.




On Wed, Feb 20, 2019 at 10:44 Lorne Tyndale  wrote:

> Hi,
>
> Usually the RDXport errors have to do with Apache not set up correctly.
> Do you have CGI enabled in Apache?  Is the needed apache configuration
> file installed/enabled?
>
>
>
>
> >
> > I'm trying to create a demo for Rivendell, and the problems that I'm
> having
> > is importing with the following:
> > 1. RDXport and Import Error Audio Converter Error: OK
> > 2. Unable to delete audio!
> > How can I fix this?
> > I tried changing the IP addresses in RDAdmin from what it was to
> 127.0.0.1
> > and then changed the rd.conf from localhost to 127.0.0.1
> > What else should I do?
> > I'm creating this in VirtualBox and VMWare
> > Thanks in advanced!!!___
> > Rivendell-dev mailing list
> > Rivendell-dev@lists.rivendellaudio.org
> > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
> ___
> Rivendell-dev mailing list
> Rivendell-dev@lists.rivendellaudio.org
> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>
-- 
96.7kram
P.O. Box 332
109 North 1st Street
Montevideo, MN 56265
__
320-321-9671
www.967kram.com
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Ryan Kin]

I just tried that and it worked!
Thank's Jacob!

On Wed, Feb 20, 2019 at 11:54 AM Jacob Niemand  wrote:

> Have you disabled SELinux?  I’ve had issues with it blocking RD Library
> actions.
>
> SELinux disable: su setenforce 0
>
>
> /etc/selinux/config file to set the  SELINUX parameter to  disabled, and
> then reboot the server.
>
>
>
>
> On Wed, Feb 20, 2019 at 10:44 Lorne Tyndale 
> wrote:
>
>> Hi,
>>
>> Usually the RDXport errors have to do with Apache not set up correctly.
>> Do you have CGI enabled in Apache?  Is the needed apache configuration
>> file installed/enabled?
>>
>>
>>
>>
>> >
>> > I'm trying to create a demo for Rivendell, and the problems that I'm
>> having
>> > is importing with the following:
>> > 1. RDXport and Import Error Audio Converter Error: OK
>> > 2. Unable to delete audio!
>> > How can I fix this?
>> > I tried changing the IP addresses in RDAdmin from what it was to
>> 127.0.0.1
>> > and then changed the rd.conf from localhost to 127.0.0.1
>> > What else should I do?
>> > I'm creating this in VirtualBox and VMWare
>> > Thanks in advanced!!!___
>> > Rivendell-dev mailing list
>> > Rivendell-dev@lists.rivendellaudio.org
>> > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>> ___
>> Rivendell-dev mailing list
>> Rivendell-dev@lists.rivendellaudio.org
>> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>>
> --
> 96.7kram
> P.O. Box 332
> 109 North 1st Street
> Montevideo, MN 56265
> __
> 320-321-9671
> www.967kram.com
>
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Mircea Paun]

Hi!
Could you tell me, what exactly would these settings be on CENTOS 7 ?
I entered a remote station where I installed rivendell V3 then I returned
to V2 and now I have same problem.
selinux is disable and restarted
files are in /var/www/rd-bin/
httpd it is started
Also is there any chance to install rivendell v2.19.3 via paravel systems
repo?

* MIRCEA PAUN *
mircea.p...@gmail.com

On 20 February 2019 at 21:16:13, Ryan Kin (k1n9h...@gmail.com) wrote:

I just tried that and it worked!
Thank's Jacob!

On Wed, Feb 20, 2019 at 11:54 AM Jacob Niemand  wrote:

> Have you disabled SELinux?  I’ve had issues with it blocking RD Library
> actions.
>
> SELinux disable: su setenforce 0
>
>
> /etc/selinux/config file to set the  SELINUX parameter to  disabled, and
> then reboot the server.
>
>
>
>
> On Wed, Feb 20, 2019 at 10:44 Lorne Tyndale 
> wrote:
>
>> Hi,
>>
>> Usually the RDXport errors have to do with Apache not set up correctly.
>> Do you have CGI enabled in Apache?  Is the needed apache configuration
>> file installed/enabled?
>>
>>
>>
>>
>> >
>> > I'm trying to create a demo for Rivendell, and the problems that I'm
>> having
>> > is importing with the following:
>> > 1. RDXport and Import Error Audio Converter Error: OK
>> > 2. Unable to delete audio!
>> > How can I fix this?
>> > I tried changing the IP addresses in RDAdmin from what it was to
>> 127.0.0.1
>> > and then changed the rd.conf from localhost to 127.0.0.1
>> > What else should I do?
>> > I'm creating this in VirtualBox and VMWare
>> > Thanks in advanced!!!___
>> > Rivendell-dev mailing list
>> > Rivendell-dev@lists.rivendellaudio.org
>> > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>> ___
>> Rivendell-dev mailing list
>> Rivendell-dev@lists.rivendellaudio.org
>> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>>
> --
> 96.7kram
> P.O. Box 332
> 109 North 1st Street
> Montevideo, MN 56265
> __
> 320-321-9671
> www.967kram.com
>
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Re: [RDD] RDXport / Recording Issues Centos7

[Mircea Paun]

Nevermind!
It seems that the problem is deeper:

/var/www/rd-bin/rdxport.cgi: error while loading shared libraries:
librd-2.19.3.so: cannot open shared object file: No such file or directory

* MIRCEA PAUN *
+40 724232195
mircea.p...@gmail.com

On 23 April 2020 at 21:05:23, Mircea Paun (mircea.p...@gmail.com) wrote:

Hi!
Could you tell me, what exactly would these settings be on CENTOS 7 ?
I entered a remote station where I installed rivendell V3 then I returned
to V2 and now I have same problem.
selinux is disable and restarted
files are in /var/www/rd-bin/
httpd it is started
Also is there any chance to install rivendell v2.19.3 via paravel systems
repo?

* MIRCEA PAUN *
mircea.p...@gmail.com

On 20 February 2019 at 21:16:13, Ryan Kin (k1n9h...@gmail.com) wrote:

I just tried that and it worked!
Thank's Jacob!

On Wed, Feb 20, 2019 at 11:54 AM Jacob Niemand  wrote:

> Have you disabled SELinux?  I’ve had issues with it blocking RD Library
> actions.
>
> SELinux disable: su setenforce 0
>
>
> /etc/selinux/config file to set the  SELINUX parameter to  disabled, and
> then reboot the server.
>
>
>
>
> On Wed, Feb 20, 2019 at 10:44 Lorne Tyndale 
> wrote:
>
>> Hi,
>>
>> Usually the RDXport errors have to do with Apache not set up correctly.
>> Do you have CGI enabled in Apache?  Is the needed apache configuration
>> file installed/enabled?
>>
>>
>>
>>
>> >
>> > I'm trying to create a demo for Rivendell, and the problems that I'm
>> having
>> > is importing with the following:
>> > 1. RDXport and Import Error Audio Converter Error: OK
>> > 2. Unable to delete audio!
>> > How can I fix this?
>> > I tried changing the IP addresses in RDAdmin from what it was to
>> 127.0.0.1
>> > and then changed the rd.conf from localhost to 127.0.0.1
>> > What else should I do?
>> > I'm creating this in VirtualBox and VMWare
>> > Thanks in advanced!!!___
>> > Rivendell-dev mailing list
>> > Rivendell-dev@lists.rivendellaudio.org
>> > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>> ___
>> Rivendell-dev mailing list
>> Rivendell-dev@lists.rivendellaudio.org
>> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>>
> --
> 96.7kram
> P.O. Box 332
> 109 North 1st Street
> Montevideo, MN 56265
> __
> 320-321-9671
> www.967kram.com
>
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev