[rlug] probleme cu o placa de retea
Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am acces direct la sistem acum dar cineva mi-a introdus placa de retea . Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune : eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11. dar numai atit fara restul informatiiloe care apar de ex la eth0 cu acelasi chipset eth0: RealTek RTL8139 at 0xe400, 00:e0:7d:8d:a9:38, IRQ 12 eth0: Identified 8139 chip type 'RTL-8139B' PCI: Found IRQ 10 for device :00:0a.0 PCI: Sharing IRQ 10 with :00:07.5 in modprobe.conf am adaugat un alias eth2 8139too. Ifconfig refuza sa configureze placa : ifconfig eth2 192.168.1.55 netmask 255.255.255.0 gw 192.168.1.1 SIOCSIFADDR: No such device eth2: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCGIFADDR: No such device SIOCSIFBROADCAST: No such device SIOCSIFADDR: No such device eth2: unknown interface: No such device SIOCSIFADDR: No such device eth2: unknown interface: No such device Ce sa-i mai fac? Paul ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
Paul Lacatus wrote: Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am acces direct la sistem acum dar cineva mi-a introdus placa de retea . Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune : eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11. dar numai atit fara restul informatiiloe care apar de ex la eth0 cu acelasi chipset eth0: RealTek RTL8139 at 0xe400, 00:e0:7d:8d:a9:38, IRQ 12 eth0: Identified 8139 chip type 'RTL-8139B' PCI: Found IRQ 10 for device :00:0a.0 PCI: Sharing IRQ 10 with :00:07.5 in modprobe.conf am adaugat un alias eth2 8139too. Ifconfig refuza sa configureze placa : ifconfig eth2 192.168.1.55 netmask 255.255.255.0 gw 192.168.1.1 SIOCSIFADDR: No such device eth2: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCGIFADDR: No such device SIOCSIFBROADCAST: No such device SIOCSIFADDR: No such device eth2: unknown interface: No such device SIOCSIFADDR: No such device eth2: unknown interface: No such device Ce sa-i mai fac? nu e rtl, e alt chipset. schimba placa. -- 'Government is like a baby: An alimentary canal with a big appetite at one end and no sense of responsibility at the other.' ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
lonely wolf wrote: Paul Lacatus wrote: Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am acces direct la sistem acum dar cineva mi-a introdus placa de retea . Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune : eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11. Ce sa-i mai fac? nu e rtl, e alt chipset. schimba placa. modprobe tulip ? Ce zice ? Dragos ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
Salut 2009/3/11 Paul Lacatus paul.laca...@emon.ro: Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am acces direct la sistem acum dar cineva mi-a introdus placa de retea . Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune : lspci dupa ce booteaza sistemul. eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11. dar numai atit fara restul informatiiloe care apar de ex la eth0 cu acelasi chipset eth0: RealTek RTL8139 at 0xe400, 00:e0:7d:8d:a9:38, IRQ 12 eth0: Identified 8139 chip type 'RTL-8139B' PCI: Found IRQ 10 for device :00:0a.0 PCI: Sharing IRQ 10 with :00:07.5 in modprobe.conf am adaugat un alias eth2 8139too. Ifconfig refuza sa configureze placa : ifconfig eth2 192.168.1.55 netmask 255.255.255.0 gw 192.168.1.1 SIOCSIFADDR: No such device eth2: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCGIFADDR: No such device SIOCSIFBROADCAST: No such device SIOCSIFADDR: No such device eth2: unknown interface: No such device SIOCSIFADDR: No such device eth2: unknown interface: No such device Ce sa-i mai fac? Paul ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
Paul Lacatus wrote: Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am acces direct la sistem acum dar cineva mi-a introdus placa de retea . Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune : eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11. tulip ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
Vlad Georgescu wrote:
Paul Lacatus wrote:
Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am
acces direct la sistem acum dar cineva mi-a introdus placa de retea .
Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune :
eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11.
tulip
nu vrea nici tulip . Eth1 merge cu tulip dar eth2
lspci :
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Ethernet controller: Linksys NC100 Network Everywhere Fast
Ethernet 10/100 (rev 11)
[r...@gw ~]# cat /etc/modprobe.conf
alias eth0 8139too
alias snd-card-0 snd-via82xx
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx
/usr/sbin/alsactl restore /dev/null 21 || :
remove snd-via82xx { /usr/sbin/alsactl store /dev/null 21 || : ; };
/sbin/modprobe -r --ignore-remove snd-via82xx
alias usb-controller uhci-hcd
alias eth1 tulip
alias eth2 tulip
lsmod:
Module Size Used by
iptable_nat22677 1
ip_conntrack 42265 1 iptable_nat
ip_tables 20161 1 iptable_nat
autofs426437 0
sunrpc159749 1
md5 4161 1
ipv6 262209 18
dm_mod 58229 0
uhci_hcd 34129 0
parport_pc 28293 0
parport39177 1 parport_pc
i2c_viapro 8145 0
i2c_core 21569 1 i2c_viapro
snd_via82xx28929 0
gameport 17993 1 snd_via82xx
snd_ac97_codec 76217 1 snd_via82xx
snd_pcm_oss51697 0
snd_mixer_oss 17729 1 snd_pcm_oss
snd_pcm97097 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 31557 1 snd_pcm
snd_page_alloc 9797 2 snd_via82xx,snd_pcm
snd_mpu401_uart 9409 1 snd_via82xx
snd_rawmidi28897 1 snd_mpu401_uart
snd_seq_device 8781 1 snd_rawmidi
snd57413 9
snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 10529 1 snd
tulip 53729 0
8139too28480 0
mii 5569 1 8139too
floppy 63221 0
ext3 130377 2
jbd77273 1 ext3
Ce sa-i fac sa merga ca nu mai inteleg nimic.
Paul
___
RLUG mailing list
RLUG@lists.lug.ro
http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
Vlad Georgescu wrote: Paul Lacatus wrote: Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am acces direct la sistem acum dar cineva mi-a introdus placa de retea . Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune : eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11. tulip si inca ceva : [r...@gw ~]# ip l 1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: BROADCAST,MULTICAST,UP mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:e0:7d:8d:a9:38 brd ff:ff:ff:ff:ff:ff 3: dev14882: BROADCAST,MULTICAST mtu 1500 qdisc noop qlen 1000 link/ether 00:e0:7d:8d:a9:36 brd ff:ff:ff:ff:ff:ff 4: eth1: BROADCAST,MULTICAST,UP mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:50:bf:9d:2d:ea brd ff:ff:ff:ff:ff:ff 5: sit0: NOARP mtu 1480 qdisc noop link/sit 0.0.0.0 brd 0.0.0.0 ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
Paul Lacatus wrote: Vlad Georgescu wrote: Paul Lacatus wrote: Pe un sistem fc3 vreau sa mai pun o a treia placa de retea . Eu nu am acces direct la sistem acum dar cineva mi-a introdus placa de retea . Chipsetul placii pare a fi RealTek 8139. Kernelul la dmesg spune : eth2: ADMtek Comet rev 17 at cc032000, 00:50:BF:9D:2D:EA, IRQ 11. tulip si inca ceva : [r...@gw ~]# ip l 1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: BROADCAST,MULTICAST,UP mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:e0:7d:8d:a9:38 brd ff:ff:ff:ff:ff:ff 3: dev14882: BROADCAST,MULTICAST mtu 1500 qdisc noop qlen 1000 link/ether 00:e0:7d:8d:a9:36 brd ff:ff:ff:ff:ff:ff 4: eth1: BROADCAST,MULTICAST,UP mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:50:bf:9d:2d:ea brd ff:ff:ff:ff:ff:ff 5: sit0: NOARP mtu 1480 qdisc noop link/sit 0.0.0.0 brd 0.0.0.0 e normal sa nu apara in ip l daca nu se incarca driverul. ar fi trebuit sa mearga cu tulip, din cite zice google. ca obs, am mai avut meciuri in trecut cu computere in care placile de retea nu mergeau in orice slot PCI, ci doar in cele 2-3 cele mai apropiate de slotul AGP. in ultimele sloturi nu mergeau decit placi de sunet. probabil placi de baza de rahat in care partea de bus mastering nu mergea decit pt unele sloturi. -- 'Government is like a baby: An alimentary canal with a big appetite at one end and no sense of responsibility at the other.' ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] probleme cu o placa de retea
Paul Lacatus wrote:
nu vrea nici tulip . Eth1 merge cu tulip dar eth2
lspci :
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Ethernet controller: Linksys NC100 Network Everywhere Fast
Ethernet 10/100 (rev 11)
[r...@gw ~]# cat /etc/modprobe.conf
alias eth0 8139too
alias snd-card-0 snd-via82xx
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx
/usr/sbin/alsactl restore /dev/null 21 || :
remove snd-via82xx { /usr/sbin/alsactl store /dev/null 21 || : ; };
/sbin/modprobe -r --ignore-remove snd-via82xx
alias usb-controller uhci-hcd
alias eth1 tulip
alias eth2 tulip
sunt initializate in alta ordine
lasa in in modprobe.conf eth0 si 1 cu 8139too si eth2 cu tulip
si daca folosesti rh|centos|fc pune in
/etc/sysconfig/network-scripts/ifcfg-eth0,1,2 mac-urile corespunzatoare
(HWADDR=cutare)
___
RLUG mailing list
RLUG@lists.lug.ro
http://lists.lug.ro/mailman/listinfo/rlug
[rlug] VMware-player
Am încercat să instalalez VMware-player pe un Mandriva 2009 powerpack, stock, instalat de la mama lui de pe dvd. Bineînţeles că s-a plâns că nu găseşte nu'ş ce module şi a vrut să şi le compileze. Bineînţeles că n-a găsit gcc, pen'că sistemul respectiv e departe de a fi al nu ştiu care guru în ale softului. Bineînţeles că după aia n-a găsit sursele kernelului desktop596-2.6.unmilionimpar.XXmbpoKKTcumak. Bineînţeles că nici eu nu le-am găsit, nici măcar kernel-headers pentru ce kernel a ales softul de instalare să-mi pună. Cum mama naibii instalez eu rahatul ăla de soft? Repet: toate stoc, după dvd-ul de la mandriva. -- Dragos P 126296 luser La revedere. Drum bun ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] VMware-player
Probabil cu urpmi de pe net? ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
Re: [rlug] VMware-player
On Wed, 11 Mar 2009 20:36:17 +0200 Vali Dragnuta wrote: Probabil cu urpmi de pe net? Pe de alta parte, nu stiu prea bine cu ce pachete vine Mandriva, dar ar fi superb daca ar avea ceva gen build-essential din Debian. -- Adi Pircalabu ___ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
