Re: [rrd-users] only getting nan values

[Simon Hobson]

Jim Sher  wrote:

> RRD creating scripts here: (NOTE! I've been chopping and changing the scripts 
> since yesterday when I composed the original email I sent earlier to see if I 
> could jiggle something loose :-) - no luck so far)
> 
> #! /bin/bash
> 
> rrdtool create data.rrd \
> --step '60' \
> 'DS:datadown:COUNTER:120:0:U' \
> 'DS:dataup:COUNTER:120:0:U' \

So here you have a heartbeat of only 120 seconds - that means if two updates 
are 121 seconds apart then you'll get unknown values stored. The problem here 
is that we don't know if you've changed this - if you were using this value 
when collecting every 5 minutes then you'd be 100% guaranteed to get no data !

> rrdtool create load.rrd --start N --step 300 \
> DS:load:GAUGE:1200:0.0:4.0 \

OK, here you've got 20 minutes. As long as you've collected data for at least 
10 minutes then you should have something stored.




> As for rrdtool fetch, I can't seem to get the syntax to get any results right 
> :-(

>From one of my systems :
$ rrdtool fetch load.rrd AVERAGE -s 1464339000 -r 1800
  load_1min   load_5min  load_15min

1464339600: 2.33e-03 6.67e-04 0.00e+00
1464341400: 1.20e-02 6.005556e-03 3.33e-04
1464343200: -nan -nan -nan

$ rrdtool info load.rrd 
filename = "load.rrd"
rrd_version = "0003"
step = 300
last_update = 1464342015
header_size = 3632
ds[load_1min].index = 0
ds[load_1min].type = "GAUGE"
...
rra[0].cf = "AVERAGE"
rra[0].rows = 576
rra[0].cur_row = 227
rra[0].pdp_per_row = 1
...
rra[2].cf = "AVERAGE"
rra[2].rows = 672
rra[2].cur_row = 91
rra[2].pdp_per_row = 6
...

This fetches data from the AVERAGE cf for resolution 1800s (6x300), and only 
showing the last few values for brevity. Note that you can only fetch what is 
stored, you can't fetch arbitrary data consolidated on the fly like you can 
with rrdgraph.

___
rrd-users mailing list
rrd-users@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users

Re: [rrd-users] only getting nan values

[Simon Hobson]

Jim Sher  wrote:

> I'm using cron to run a script every 5 minutes to get some values and update 
> the RRD files and then draw the graphs.
> My script to populate the RRAs in the RRD:

> But when I view the graphs (all of them are like the one below), all the 
> values are not numbers (nan).

Two common problems :

1) How long did you let your collection script run for ? One update is *NOT* 
sufficient to create any known values in the database.

2) Post the commands used to create the RRD files. A common mistake is to make 
heartbeat only 300s and update "every 5 minutes". "Every 5 minutes" often isn't 
"every 300s", especially when using "N" as the timestamp. If two updates are 
301s apart, a heartbeat of 300s means "unknown" data will be stored.

Try "rrdtool fetch" to see what's stored in the database - it's easier than 
trying to work out if it's the data or the graphing that's causing the problem.

For reference, see http://rrdtool.vandenbogaerdt.nl
In particular, "Rates, normalizing and consolidating" should make things a lot 
clearer.

___
rrd-users mailing list
rrd-users@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users

[rrd-users] only getting nan values

[Jim Sher]

Hi there Everyone,

Hoping someone can help me out. I'm trying to build up graphs on a
Raspberry Pi (2B) running Rasbian Jessie.

I'm using cron to run a script every 5 minutes to get some values and
update the RRD files and then draw the graphs.

My script to populate the RRAs in the RRD:

> #! /bin/bash
>
> LOAD=`cat /proc/loadavg | awk '{print $1}'`
> RXBYTES=`cat /sys/class/net/eth0/statistics/rx_bytes`
> TXBYTES=`cat /sys/class/net/eth0/statistics/tx_bytes`
> TEMP=`/opt/vc/bin/vcgencmd measure_temp|cut -c6-9`
> MEM=`free -b | grep Mem | awk '{print $4/$2 * 100.0}'`
> /usr/bin/rrdtool update load.rrd N:$LOAD/usr/bin/rrdtool update data.rrd -t 
> datadown:dataup N:$RXBYTES:$TXBYTES/usr/bin/rrdtool update pitemp.rrd 
> N:$TEMP/usr/bin/rrdtool update mem.rrd N:$MEM
>
> echo $LOAD
> echo $RXBYTES
> echo $TXBYTES
> echo $TEMP
> echo $MEM
>
> As you can see, I'm drawing graphs for:

   - Load Averages
   - Data Throughput Counter
   - CPU/GPU/SoC Temperature
   - Memory Percentage

As well as outputting the values to the terminal as a confirmation that the
values being passed are numbers.

So I run the script and get this:

> 0.362665426950166912415141.72.36093
>
> This all looks fine, especially as there are no data type definitions in
bash (so no need to worry about integers/doubles/strings/etc). I then run
the script to draw the graphs:

> #! /bin/bash
> /usr/bin/rrdtool graph 'data.png' \--title 'Odin traffic (eth0)' \--watermark 
> "Graph Drawn `date`" \--vertical-label 'Bytes' \--alt-autoscale \--units=si 
> \--width '640' \--height '300' \--full-size-mode \--start end-172800s 
> \'DEF:rx=data.rrd:datadown:AVERAGE' \'DEF:tx=data.rrd:dataup:AVERAGE' 
> \'AREA:rx#FFFF:Tx\:' \'GPRINT:tx:LAST:\:%8.2lf %s]' 
> \'STACK:tx#0709FDFF:Rx\:' \'GPRINT:rx:LAST:\:%8.2lf %s]\n'
> /usr/bin/rrdtool graph 'load.png' \--title 'Odin Load Average' \--watermark 
> "Graph Drawn `date`" \--alt-autoscale \--width '640' \--height '300' 
> \--full-size-mode \--start end-172800s \'DEF:load=load.rrd:load:AVERAGE' 
> \'AREA:load#FFFF:Load Average\:' \'GPRINT:load:LAST:\:%8.2lf %s]'
> /usr/bin/rrdtool graph 'mem.png' \--title 'Odin Memory Usage' \--watermark 
> "Graph Drawn `date`" \--vertical-label '%' \--upper-limit '100' 
> \--lower-limit '0' \--width '640' \--height '300' \--full-size-mode \--start 
> end-172800s \'DEF:mem=mem.rrd:mem:AVERAGE' \'AREA:mem#FFFF:Memory\:' 
> \'GPRINT:mem:LAST:\:%8.2lf %s]'
> /usr/bin/rrdtool graph 'pitemp.png' \--title 'Odin SoC Temperature' 
> \--watermark "Graph Drawn `date`" \--vertical-label '°C' \--alt-autoscale 
> \--width '640' \--height '300' \--full-size-mode \--start end-172800s 
> \'DEF:pitemp=pitemp.rrd:pitemp:AVERAGE' \'AREA:pitemp#FFFF:CPU/GPU 
> Temperature\:' \'GPRINT:pitemp:LAST:\:%8.2lf %s]'
>
> I get the expected output:

> 640x300640x300640x300640x300
>
> But when I view the graphs (all of them are like the one below), all the
values are not numbers (nan). Any help would be appreciated.

[image: Data Throughput Counter Graph]
 [image:
Load Average Graph]  [image: Memory
Usage Percentage Graph]  [image: SoC
Temperature Graph] 


Regards,

Jim


P.S. I'll be cleaning up the formatting of the graphs themselves once i get
the values to start displaying.


___
rrd-users mailing list
rrd-users@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users