Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
On Wed 23.Sep'09 at 18:33:13 -0700, Behzad Mahini wrote: Ok, I made the umask to be strict on the entire 'test' directory (recursively), and ran the make test, and then prove -lbv You most certainly want -bv and not -lbv. failing_cases and some of the warnings/errors went away. However, there are still some more errors left (See Results shown below). Since some of these errors (See Results below) are indicating that they are known issues with GnuPG 1.0.1, it begs the following questions: 1) What is the significance of the term ...known issues with GnuPG 1.0.1... (i.e., known to RT developers? or known to the GnuPG developers?) Neither. To the original developer of GnuPg interface, a CPAN module written to let Perl applications talk to GnuPg. You may note that we now maintain thatm odule but that we didn't originally write it. 2) I have installed GnuPG 2.0.13, and do not have GnuPG 1.xx installed on my machine. Therefore why is it complaining about GnuPG 1.0.1? It's a hardcoded warning statement in the test files. And unrelated here. Again, note that I have only created a symbolic link for the executable gpg (supposedly the executable for GnuPG 1.x) to point to gpg2 (GnuPG 2.0.13). I only didthis as perl Malefile.PL for CPAN's GnuPG-Interface would not have gone ahead, as it obviously needed gpg. That's what might be referred to as an end run around a safety mechanism GnuPg::Interface wasn't designed to work with gpg2 and they changed the API/CLI, which is part of what gets something a different executable name. In particular, gpg 1 outputs timestames as ISO dates and gpg 2 outputs them as seconds since the epoch. As it happens, I had a few minutes today and did the work to support GPG2 in GnuPg::Interface. Can you try out: http://pause.perl.org/incoming/GnuPG-Interface-0.41_01.tar.gz and report back? If it's more than a few hours, you'll find that file at search.cpan.org. pgpU7YyX2uwXo.pgp Description: PGP signature ___ http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users Community help: http://wiki.bestpractical.com Commercial support: sa...@bestpractical.com Discover RT's hidden secrets with RT Essentials from O'Reilly Media. Buy a copy at http://rtbook.bestpractical.com
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
$ sudo prove -blv t/get_public_keys.t t/get_public_keys.t .. 1..3 gpg: WARNING: unsafe permissions on homedir `test' not ok 1 not ok 2 not ok 3 subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/ get_public_keys.t line 92. Failed 3/3 subtests Test Summary Report Can you try to track down the source of that gpg warning? I suspect that it might be umask related. It may be that GnuPG 2.0 is being stricter about something for homedir permissions. ___ http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users Community help: http://wiki.bestpractical.com Commercial support: sa...@bestpractical.com Discover RT's hidden secrets with RT Essentials from O'Reilly Media. Buy a copy at http://rtbook.bestpractical.com
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
May be setting umask to a stricter value will make all those tests pass. On Wed, Sep 23, 2009 at 5:02 PM, Jesse Vincent je...@bestpractical.com wrote: $ sudo prove -blv t/get_public_keys.t t/get_public_keys.t .. 1..3 gpg: WARNING: unsafe permissions on homedir `test' not ok 1 not ok 2 not ok 3 subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/ get_public_keys.t line 92. Failed 3/3 subtests Test Summary Report Can you try to track down the source of that gpg warning? I suspect that it might be umask related. It may be that GnuPG 2.0 is being stricter about something for homedir permissions. ___ http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users Community help: http://wiki.bestpractical.com Commercial support: sa...@bestpractical.com Discover RT's hidden secrets with RT Essentials from O'Reilly Media. Buy a copy at http://rtbook.bestpractical.com -- Best regards, Ruslan. ___ http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users Community help: http://wiki.bestpractical.com Commercial support: sa...@bestpractical.com Discover RT's hidden secrets with RT Essentials from O'Reilly Media. Buy a copy at http://rtbook.bestpractical.com
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
Ok, I made the umask to be strict on the entire 'test' directory (recursively), and ran the make test, and then prove -lbv failing_cases and some of the warnings/errors went away. However, there are still some more errors left (See Results shown below). Since some of these errors (See Results below) are indicating that they are known issues with GnuPG 1.0.1, it begs the following questions: 1) What is the significance of the term ...known issues with GnuPG 1.0.1... (i.e., known to RT developers? or known to the GnuPG developers?) 2) I have installed GnuPG 2.0.13, and do not have GnuPG 1.xx installed on my machine. Therefore why is it complaining about GnuPG 1.0.1? Again, note that I have only created a symbolic link for the executable gpg (supposedly the executable for GnuPG 1.x) to point to gpg2 (GnuPG 2.0.13). I only didthis as perl Malefile.PL for CPAN's GnuPG-Interface would not have gone ahead, as it obviously needed gpg. Results of make test = /usr/local/.cpan/build/GnuPG-Interface-0.40_04 sh-3.2# make test PERL_DL_NONLAZY=1 /usr/bin/perl -MExtUtils::Command::MM -e test_harness(0, 'inc', 'blib/lib', 'blib/arch') t/*.t t/clearsign.t .. ok t/decrypt.t ok t/detach_sign.t ok t/encrypt.t ok t/encrypt_symmetrically.t .. ok t/export_keys.t ok t/Fingerprint.t ok t/get_public_keys.t 1/3 subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/get_public_keys.t line 92. t/get_public_keys.t Failed 3/3 subtests t/get_secret_keys.t Failed 2/2 subtests t/import_keys.t ok t/Interface.t .. ok t/list_public_keys.t ... ok t/list_secret_keys.t ... ok t/list_sigs.t .. ok t/passphrase_handling.t ok t/sign.t ... ok t/sign_and_encrypt.t ... ok t/UserId.t . ok t/verify.t . ok t/wrap_call.t .. ok Test Summary Report --- t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3) Failed tests: 1-3 t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2) Failed tests: 1-2 Files=20, Tests=51, 2 wallclock secs ( 0.07 usr 0.06 sys + 1.47 cusr 0.43 csys = 2.03 CPU) Result: FAIL Failed 2/20 test programs. 5/51 subtests failed. make: *** [test_dynamic] Error 255 sh-3.2# sh-3.2# sh-3.2# sh-3.2# prove -lbv t/get_public_keys.t t/get_public_keys.t .. 1..3 not ok 1 not ok 2 not ok 3 subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/ get_public_keys.t line 92. Failed 3/3 subtests Test Summary Report --- t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3) Failed tests: 1-3 Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.07 cusr 0.02 csys = 0.12 CPU) Result: FAIL sh-3.2# prove -lbv t/get_secret_keys.t t/get_secret_keys.t .. 1..2 not ok 1 not ok 2 Failed 2/2 subtests Test Summary Report --- t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2) Failed tests: 1-2 Files=1, Tests=2, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.07 cusr 0.01 csys = 0.11 CPU) Result: FAIL sh-3.2# = -Behzad On Sep 23, 2009, at 6:11 AM, Ruslan Zakirov wrote: May be setting umask to a stricter value will make all those tests pass. On Wed, Sep 23, 2009 at 5:02 PM, Jesse Vincent je...@bestpractical.com wrote: $ sudo prove -blv t/get_public_keys.t t/get_public_keys.t .. 1..3 gpg: WARNING: unsafe permissions on homedir `test' not ok 1 not ok 2 not ok 3 subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/ get_public_keys.t line 92. Failed 3/3 subtests Test Summary Report Can you try to track down the source of that gpg warning? I suspect that it might be umask related. It may be that GnuPG 2.0 is being stricter about something for homedir permissions. ___ http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users Community help: http://wiki.bestpractical.com Commercial support: sa...@bestpractical.com Discover RT's hidden secrets with RT Essentials from O'Reilly Media. Buy a copy at http://rtbook.bestpractical.com -- Best regards, Ruslan. ___ http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users Community help: http://wiki.bestpractical.com Commercial support: sa...@bestpractical.com Discover RT's hidden secrets with RT Essentials from O'Reilly Media. Buy a copy at http://rtbook.bestpractical.com
[rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
I can't finalize my RTIR installation, as I can't do a successful installation of the last of the RTIR prerequisites due to a bunch of the tests failing for CPAN module GnuPG::Interface. Before posting, I did consult all the RTIR documentations, and GnuPG website, and CPAN, etc., and could not find anything addressing the failing test results...I also note that CPAN's site claims a 68% success rate (Perl 5.8.8) for tests associated to GnuPG::Interface module. Details are listed below. My Setup: === RT 3.8.4 RTFM -2.4.2 Mac OS X 10.5.8 MySQL 5.1.37 Apache/2.2.13 (Unix) mod_perl/2.0.4 Perl/v5.8.8 configured My Installed Prerequisites (for RTIR): == GnuPG 2.0.13(I am planning to use S/MIME, and Gnu's site recommended version 2.x as opposed to 1.x of GnuPG) Concerns: === As I am about to use RTIR for secure purposes, the obvious concern of mine in the event I do a CPAN 'force install GnuPG::Interface, is to get blind-sided with things that I should have not overlooked as a result of the failing tests. Misc. = I also attempted to do a CPAN installation of module GnuPG (different than module GnuPG::Interface)...and of its 25 tests, every single one failed. For now I am assuming that I don't need to worry about this module as a pre-requisite for a successful installation of RTIR (as GnuPG::Interface should suffice). Here are the output of my (failing) installation of CPAN module GnuPG::Interface: === cpan[3] install GnuPG::Interface Running install for module 'GnuPG::Interface' Running make for J/JE/JESSE/GnuPG-Interface-0.36.tar.gz CPAN: Digest::SHA loaded ok (v5.47) CPAN: Compress::Zlib loaded ok (v2.02) Checksum for /usr/local/.cpan/sources/authors/id/J/JE/JESSE/GnuPG- Interface-0.36.tar.gz ok Scanning cache /usr/local/.cpan/build for sizes DONE CPAN: Archive::Tar loaded ok (v1.52) GnuPG-Interface-0.36/ GnuPG-Interface-0.36/ChangeLog GnuPG-Interface-0.36/COPYING GnuPG-Interface-0.36/lib/ GnuPG-Interface-0.36/lib/GnuPG/ GnuPG-Interface-0.36/lib/GnuPG/Fingerprint.pm GnuPG-Interface-0.36/lib/GnuPG/Handles.pm GnuPG-Interface-0.36/lib/GnuPG/Interface.pm GnuPG-Interface-0.36/lib/GnuPG/Key.pm GnuPG-Interface-0.36/lib/GnuPG/Options.pm GnuPG-Interface-0.36/lib/GnuPG/PrimaryKey.pm GnuPG-Interface-0.36/lib/GnuPG/PublicKey.pm GnuPG-Interface-0.36/lib/GnuPG/SecretKey.pm GnuPG-Interface-0.36/lib/GnuPG/Signature.pm GnuPG-Interface-0.36/lib/GnuPG/SubKey.pm GnuPG-Interface-0.36/lib/GnuPG/UserId.pm GnuPG-Interface-0.36/Makefile.PL GnuPG-Interface-0.36/MANIFEST GnuPG-Interface-0.36/META.yml GnuPG-Interface-0.36/NEWS GnuPG-Interface-0.36/README GnuPG-Interface-0.36/SIGNATURE GnuPG-Interface-0.36/t/ GnuPG-Interface-0.36/t/clearsign.t GnuPG-Interface-0.36/t/decrypt.t GnuPG-Interface-0.36/t/detach_sign.t GnuPG-Interface-0.36/t/encrypt.t GnuPG-Interface-0.36/t/encrypt_symmetrically.t GnuPG-Interface-0.36/t/export_keys.t GnuPG-Interface-0.36/t/Fingerprint.t GnuPG-Interface-0.36/t/get_public_keys.t GnuPG-Interface-0.36/t/get_secret_keys.t GnuPG-Interface-0.36/t/GnuPG/ GnuPG-Interface-0.36/t/GnuPG/ComparableFingerprint.pm GnuPG-Interface-0.36/t/GnuPG/ComparableKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparablePrimaryKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparablePublicKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparableSecretKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparableSignature.pm GnuPG-Interface-0.36/t/GnuPG/ComparableSubKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparableUserId.pm GnuPG-Interface-0.36/t/import_keys.t GnuPG-Interface-0.36/t/Interface.t GnuPG-Interface-0.36/t/list_public_keys.t GnuPG-Interface-0.36/t/list_secret_keys.t GnuPG-Interface-0.36/t/list_sigs.t GnuPG-Interface-0.36/t/MyTest.pm GnuPG-Interface-0.36/t/MyTestSpecific.pm GnuPG-Interface-0.36/t/passphrase_handling.t GnuPG-Interface-0.36/t/sign.t GnuPG-Interface-0.36/t/sign_and_encrypt.t GnuPG-Interface-0.36/t/UserId.t GnuPG-Interface-0.36/t/verify.t GnuPG-Interface-0.36/t/wrap_call.t GnuPG-Interface-0.36/test/ GnuPG-Interface-0.36/test/encrypted.1.gpg GnuPG-Interface-0.36/test/key.1.asc GnuPG-Interface-0.36/test/options GnuPG-Interface-0.36/test/passphrase GnuPG-Interface-0.36/test/plain.1.txt GnuPG-Interface-0.36/test/public-keys/ GnuPG-Interface-0.36/test/public-keys/1.0.test GnuPG-Interface-0.36/test/public-keys/1.1.test GnuPG-Interface-0.36/test/public-keys/2.0.test GnuPG-Interface-0.36/test/public-keys/2.1.test GnuPG-Interface-0.36/test/public-keys-sigs/ GnuPG-Interface-0.36/test/public-keys-sigs/1.0.test GnuPG-Interface-0.36/test/public-keys-sigs/1.1.test GnuPG-Interface-0.36/test/public-keys-sigs/2.0.test GnuPG-Interface-0.36/test/public-keys-sigs/2.1.test GnuPG-Interface-0.36/test/pubring.gpg GnuPG-Interface-0.36/test/secret-keys/ GnuPG-Interface-0.36/test/secret-keys/1.0.test GnuPG-Interface-0.36/test/secret-keys/2.0.test
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
On Tue, Sep 22, 2009 at 11:06:57AM -0700, Behzad Mahini wrote: I can't finalize my RTIR installation, as I can't do a successful installation of the last of the RTIR prerequisites due to a bunch of the tests failing for CPAN module GnuPG::Interface. Before posting, I did consult all the RTIR documentations, and GnuPG website, and CPAN, etc., and could not find anything addressing the failing test results...I also note that CPAN's site claims a 68% success rate (Perl 5.8.8) for tests associated to GnuPG::Interface module. Details are listed below. Diagnosing your failure is difficult without more information about why it is failing. Download the module and do the install manually, perl Makefile.PL make test prove -lv t/anything_that_fails -kevin My Setup: === RT 3.8.4 RTFM -2.4.2 Mac OS X 10.5.8 MySQL 5.1.37 Apache/2.2.13 (Unix) mod_perl/2.0.4 Perl/v5.8.8 configured My Installed Prerequisites (for RTIR): == GnuPG 2.0.13 (I am planning to use S/MIME, and Gnu's site recommended version 2.x as opposed to 1.x of GnuPG) Concerns: === As I am about to use RTIR for secure purposes, the obvious concern of mine in the event I do a CPAN 'force install GnuPG::Interface, is to get blind-sided with things that I should have not overlooked as a result of the failing tests. Misc. = I also attempted to do a CPAN installation of module GnuPG (different than module GnuPG::Interface)...and of its 25 tests, every single one failed. For now I am assuming that I don't need to worry about this module as a pre-requisite for a successful installation of RTIR (as GnuPG::Interface should suffice). Here are the output of my (failing) installation of CPAN module GnuPG::Interface: === cpan[3] install GnuPG::Interface Running install for module 'GnuPG::Interface' Running make for J/JE/JESSE/GnuPG-Interface-0.36.tar.gz CPAN: Digest::SHA loaded ok (v5.47) CPAN: Compress::Zlib loaded ok (v2.02) Checksum for /usr/local/.cpan/sources/authors/id/J/JE/JESSE/GnuPG- Interface-0.36.tar.gz ok Scanning cache /usr/local/.cpan/build for sizes DONE CPAN: Archive::Tar loaded ok (v1.52) GnuPG-Interface-0.36/ GnuPG-Interface-0.36/ChangeLog GnuPG-Interface-0.36/COPYING GnuPG-Interface-0.36/lib/ GnuPG-Interface-0.36/lib/GnuPG/ GnuPG-Interface-0.36/lib/GnuPG/Fingerprint.pm GnuPG-Interface-0.36/lib/GnuPG/Handles.pm GnuPG-Interface-0.36/lib/GnuPG/Interface.pm GnuPG-Interface-0.36/lib/GnuPG/Key.pm GnuPG-Interface-0.36/lib/GnuPG/Options.pm GnuPG-Interface-0.36/lib/GnuPG/PrimaryKey.pm GnuPG-Interface-0.36/lib/GnuPG/PublicKey.pm GnuPG-Interface-0.36/lib/GnuPG/SecretKey.pm GnuPG-Interface-0.36/lib/GnuPG/Signature.pm GnuPG-Interface-0.36/lib/GnuPG/SubKey.pm GnuPG-Interface-0.36/lib/GnuPG/UserId.pm GnuPG-Interface-0.36/Makefile.PL GnuPG-Interface-0.36/MANIFEST GnuPG-Interface-0.36/META.yml GnuPG-Interface-0.36/NEWS GnuPG-Interface-0.36/README GnuPG-Interface-0.36/SIGNATURE GnuPG-Interface-0.36/t/ GnuPG-Interface-0.36/t/clearsign.t GnuPG-Interface-0.36/t/decrypt.t GnuPG-Interface-0.36/t/detach_sign.t GnuPG-Interface-0.36/t/encrypt.t GnuPG-Interface-0.36/t/encrypt_symmetrically.t GnuPG-Interface-0.36/t/export_keys.t GnuPG-Interface-0.36/t/Fingerprint.t GnuPG-Interface-0.36/t/get_public_keys.t GnuPG-Interface-0.36/t/get_secret_keys.t GnuPG-Interface-0.36/t/GnuPG/ GnuPG-Interface-0.36/t/GnuPG/ComparableFingerprint.pm GnuPG-Interface-0.36/t/GnuPG/ComparableKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparablePrimaryKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparablePublicKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparableSecretKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparableSignature.pm GnuPG-Interface-0.36/t/GnuPG/ComparableSubKey.pm GnuPG-Interface-0.36/t/GnuPG/ComparableUserId.pm GnuPG-Interface-0.36/t/import_keys.t GnuPG-Interface-0.36/t/Interface.t GnuPG-Interface-0.36/t/list_public_keys.t GnuPG-Interface-0.36/t/list_secret_keys.t GnuPG-Interface-0.36/t/list_sigs.t GnuPG-Interface-0.36/t/MyTest.pm GnuPG-Interface-0.36/t/MyTestSpecific.pm GnuPG-Interface-0.36/t/passphrase_handling.t GnuPG-Interface-0.36/t/sign.t GnuPG-Interface-0.36/t/sign_and_encrypt.t GnuPG-Interface-0.36/t/UserId.t GnuPG-Interface-0.36/t/verify.t GnuPG-Interface-0.36/t/wrap_call.t GnuPG-Interface-0.36/test/ GnuPG-Interface-0.36/test/encrypted.1.gpg GnuPG-Interface-0.36/test/key.1.asc GnuPG-Interface-0.36/test/options GnuPG-Interface-0.36/test/passphrase GnuPG-Interface-0.36/test/plain.1.txt GnuPG-Interface-0.36/test/public-keys/ GnuPG-Interface-0.36/test/public-keys/1.0.test GnuPG-Interface-0.36/test/public-keys/1.1.test GnuPG-Interface-0.36/test/public-keys/2.0.test GnuPG-Interface-0.36/test/public-keys/2.1.test GnuPG-Interface-0.36/test/public-keys-sigs/
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
Here are the results of the manual install associated to prove -lv t/
anythiing_that_fails for all of the failing tests ('perl
Makefile.PL' 'make test' steps resulted in the same output as I had
already reported in my earlier email):
$ sudo prove -lv t/encrypt.t
t/encrypt.t ..
1..3
Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can't locate auto/GnuPG/Interface/encrypt.al in @INC (@INC contains: ./
t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /Library/Perl/
Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/Updates/5.8.8 /
System/Library/Perl/5.8.8/darwin-thread-multi-2level /System/Library/
Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-multi-2level /Library/
Perl/5.8.8 /Library/Perl /Network/Library/Perl/5.8.8/darwin-thread-
multi-2level /Network/Library/Perl/5.8.8 /Network/Library/Perl /System/
Library/Perl/Extras/5.8.8/darwin-thread-multi-2level /System/Library/
Perl/Extras/5.8.8 /Library/Perl/5.8.6 /Library/Perl/5.8.1 .) at t/
encrypt.t line 21
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/3 subtests
Test Summary Report
---
t/encrypt.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 3 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
0.00 csys = 0.07 CPU)
Result: FAIL
$ sudo prove -lv t/get_public_keys.t
t/get_public_keys.t ..
1..3
Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can't locate auto/GnuPG/Interface/get_public_.al in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at t/get_public_keys.t line 22
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/3 subtests
Test Summary Report
---
t/get_public_keys.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 3 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
0.01 csys = 0.08 CPU)
Result: FAIL
$ sudo prove -lv t/get_secret_keys.t
t/get_secret_keys.t ..
1..2
Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can't locate auto/GnuPG/Interface/get_secret_.al in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
On Tue, Sep 22, 2009 at 01:50:27PM -0700, Behzad Mahini wrote:
Here are the results of the manual install associated to prove -lv t/
anythiing_that_fails for all of the failing tests ('perl
Makefile.PL' 'make test' steps resulted in the same output as I had
already reported in my earlier email):
Try out http://search.cpan.org/~jesse/GnuPG-Interface-0.40_04/ instead
of 0.36 and tell us how it does.
$ sudo prove -lv t/encrypt.t
t/encrypt.t ..
1..3
Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can't locate auto/GnuPG/Interface/encrypt.al in @INC (@INC contains: ./
t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /Library/Perl/
Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/Updates/5.8.8 /
System/Library/Perl/5.8.8/darwin-thread-multi-2level /System/Library/
Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-multi-2level /Library/
Perl/5.8.8 /Library/Perl /Network/Library/Perl/5.8.8/darwin-thread-
multi-2level /Network/Library/Perl/5.8.8 /Network/Library/Perl /System/
Library/Perl/Extras/5.8.8/darwin-thread-multi-2level /System/Library/
Perl/Extras/5.8.8 /Library/Perl/5.8.6 /Library/Perl/5.8.1 .) at t/
encrypt.t line 21
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/3 subtests
Test Summary Report
---
t/encrypt.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 3 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
0.00 csys = 0.07 CPU)
Result: FAIL
$ sudo prove -lv t/get_public_keys.t
t/get_public_keys.t ..
1..3
Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can't locate auto/GnuPG/Interface/get_public_.al in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at t/get_public_keys.t line 22
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/3 subtests
Test Summary Report
---
t/get_public_keys.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 3 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
0.01 csys = 0.08 CPU)
Result: FAIL
$ sudo prove -lv t/get_secret_keys.t
t/get_secret_keys.t ..
1..2
Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
On Tue, Sep 22, 2009 at 01:50:27PM -0700, Behzad Mahini wrote:
Here are the results of the manual install associated to prove -lv t/
anythiing_that_fails for all of the failing tests ('perl
Makefile.PL' 'make test' steps resulted in the same output as I had
already reported in my earlier email):
Try prove -bv t/somethingthatfails.t
I forgot there were shared libs and not just perl libs in there,
but also, Jesse's comments about the dev release could be interesting.
-kevin
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com
Discover RT's hidden secrets with RT Essentials from O'Reilly Media.
Buy a copy at http://rtbook.bestpractical.com
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
Results of 'prove -bv t/some_failing_test' (for all of the failed
cases).. Based on what I am seeing in the following output, I'll wait
for your response before I try Jesse's suggestion about the dev
release (GnuPG-Interface-040.x Devel version).
=
$ sudo prove -bv t/encrypt.t
t/encrypt.t ..
1..3
ok 1
gpg: WARNING: unsafe permissions on homedir `test'
ok 2
ok 3
ok
All tests successful.
Files=1, Tests=3, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr
0.03 csys = 0.13 CPU)
Result: PASS
=
=
$ sudo prove -bv t/get_public_keys.t
t/get_public_keys.t ..
1..3
gpg: WARNING: unsafe permissions on homedir `test'
not ok 1
not ok 2
not ok 3
subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/
get_public_keys.t line 92.
Failed 3/3 subtests
Test Summary Report
---
t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr
0.01 csys = 0.09 CPU)
Result: FAIL
=
=
$ sudo prove -bv t/get_secret_keys.t
t/get_secret_keys.t ..
1..2
gpg: WARNING: unsafe permissions on homedir `test'
not ok 1
not ok 2
Failed 2/2 subtests
Test Summary Report
---
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=1, Tests=2, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr
0.01 csys = 0.09 CPU)
Result: FAIL
=
=
sudo prove -bv t/passphrase_handling.t
t/passphrase_handling.t ..
1..3
ok 1
ok 2
gpg: WARNING: unsafe permissions on homedir `test'
ok 3
ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr
0.02 csys = 0.12 CPU)
Result: PASS
=
-Behzad
On Sep 22, 2009, at 2:12 PM, Kevin Falcone wrote:
On Tue, Sep 22, 2009 at 01:50:27PM -0700, Behzad Mahini wrote:
Here are the results of the manual install associated to prove -lv
t/
anythiing_that_fails for all of the failing tests ('perl
Makefile.PL' 'make test' steps resulted in the same output as I had
already reported in my earlier email):
Try prove -bv t/somethingthatfails.t
I forgot there were shared libs and not just perl libs in there,
but also, Jesse's comments about the dev release could be interesting.
-kevin
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com
Discover RT's hidden secrets with RT Essentials from O'Reilly Media.
Buy a copy at http://rtbook.bestpractical.com
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com
Discover RT's hidden secrets with RT Essentials from O'Reilly Media.
Buy a copy at http://rtbook.bestpractical.com
Re: [rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
I attempted to manually install GnuPG-Interface-040_04 ( 1--perl Makefile.PL 2-- make test,...), and it also failed during the 'make test' phase and hence no installation. Warning/Error messages were pretty much similar to the 'make test' phase of 'GnuPG- Interface-0.36' (with the exception that a lot of CPAN dependencies for this module needed to get installed manually --listed below). Test failure results are shown below, as well as a few other notes 1) GnuPG Pre-requisite for my box == gpg2 (instead of gpg) -- gnupg-2.0.13 (http://www.gnupg.org/) 2) Results of make test === $ sudo make test cp lib/GnuPG/Signature.pm blib/lib/GnuPG/Signature.pm cp lib/GnuPG/Interface.pm blib/lib/GnuPG/Interface.pm AutoSplitting blib/lib/GnuPG/Interface.pm (blib/lib/auto/GnuPG/ Interface) blib/lib/GnuPG/Interface.pm: some names are not unique when truncated to 8 characters: directory blib/lib/auto/GnuPG/Interface: get_public_keys.al, get_public_keys_with_sigs.al truncate to get_publ cp lib/GnuPG/PrimaryKey.pm blib/lib/GnuPG/PrimaryKey.pm cp lib/GnuPG/SubKey.pm blib/lib/GnuPG/SubKey.pm cp lib/GnuPG/Handles.pm blib/lib/GnuPG/Handles.pm cp lib/GnuPG/HashInit.pm blib/lib/GnuPG/HashInit.pm cp lib/GnuPG/Key.pm blib/lib/GnuPG/Key.pm cp lib/GnuPG/SecretKey.pm blib/lib/GnuPG/SecretKey.pm cp lib/GnuPG/Fingerprint.pm blib/lib/GnuPG/Fingerprint.pm cp lib/GnuPG/UserId.pm blib/lib/GnuPG/UserId.pm cp lib/GnuPG/PublicKey.pm blib/lib/GnuPG/PublicKey.pm cp lib/GnuPG/Options.pm blib/lib/GnuPG/Options.pm PERL_DL_NONLAZY=1 /usr/bin/perl -MExtUtils::Command::MM -e test_harness(0, 'inc', 'blib/lib', 'blib/arch') t/*.t t/clearsign.t .. ok t/decrypt.t ok t/detach_sign.t ok t/encrypt.t 1/3 gpg: WARNING: unsafe permissions on homedir `test' t/encrypt.t ok t/encrypt_symmetrically.t .. ok t/export_keys.t ok t/Fingerprint.t ok t/get_public_keys.t gpg: WARNING: unsafe permissions on homedir `test' t/get_public_keys.t 1/3 subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/get_public_keys.t line 92. t/get_public_keys.t Failed 3/3 subtests t/get_secret_keys.t gpg: WARNING: unsafe permissions on homedir `test' t/get_secret_keys.t Failed 2/2 subtests t/import_keys.t ok t/Interface.t .. ok t/list_public_keys.t ... ok t/list_secret_keys.t ... ok t/list_sigs.t .. ok t/passphrase_handling.t 1/3 gpg: WARNING: unsafe permissions on homedir `test' t/passphrase_handling.t ok t/sign.t ... ok t/sign_and_encrypt.t ... ok t/UserId.t . ok t/verify.t . ok t/wrap_call.t .. ok Test Summary Report --- t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3) Failed tests: 1-3 t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2) Failed tests: 1-2 Files=20, Tests=51, 2 wallclock secs ( 0.07 usr 0.05 sys + 1.47 cusr 0.43 csys = 2.02 CPU) Result: FAIL Failed 2/20 test programs. 5/51 subtests failed. make: *** [test_dynamic] Error 255 3) Results of the 'prove -blv t/some_failing_test' (Note: I combined flags b l together) -- for all Warnings/Error cases = = = = = = = = = = = = = = = = = = = = $ sudo prove -blv t/encrypt.t Password: t/encrypt.t .. 1..3 ok 1 gpg: WARNING: unsafe permissions on homedir `test' ok 2 ok 3 ok All tests successful. Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.10 cusr 0.04 csys = 0.16 CPU) Result: PASS $ sudo prove -blv t/get_public_keys.t t/get_public_keys.t .. 1..3 gpg: WARNING: unsafe permissions on homedir `test' not ok 1 not ok 2 not ok 3 subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/ get_public_keys.t line 92. Failed 3/3 subtests Test Summary Report --- t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3) Failed tests: 1-3 Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr 0.01 csys = 0.10 CPU) Result: FAIL $ sudo prove -blv t/get_secret_keys.t t/get_secret_keys.t .. 1..2 gpg: WARNING: unsafe permissions on homedir `test' not ok 1 not ok 2 Failed 2/2 subtests Test Summary Report --- t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2) Failed tests: 1-2 Files=1, Tests=2, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr 0.01 csys = 0.10 CPU) Result: FAIL $ sudo prove -blv t/passphrase_handling.t t/passphrase_handling.t .. 1..3 ok 1 ok 2 gpg: WARNING: unsafe permissions on homedir `test' ok 3 ok All tests successful. Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.09 cusr 0.02 csys = 0.13 CPU) Result: PASS 4) CPAN dependencies that Must get installed manually before GnuPG-
