[sage-release] Re: Sage 9.5.rc0 released

[Dave Morris]

Thanks for your reply.  The message when I start python says:
Python 3.9.9 (v3.9.9:ccb0e6a345, Nov 15 2021, 13:29:20)
[Clang 6.0 (clang-600.0.57)] on darwin

I installed this version of python yesterday, by downloading a MacOS 
installer from https://www.python.org/downloads/macos/.  I did this because 
my first failed attempt to build 9.5.rc0 was with Python 3.7, and I thought 
that having an old python version might be the problem (and I understand 
that Python 3.10 is not yet fully supported).  I got the same error message 
with the old install of python as with this new one.
On Tuesday, January 11, 2022 at 6:32:20 PM UTC-7 matthia...@gmail.com wrote:

> The python3 used in this build is 
> /Library/Frameworks/Python.framework/Versions/3.9/bin/python3 
> -- could you check which version this is and do you recall how you 
> installed it?
>
>
> On Tuesday, January 11, 2022 at 4:19:41 PM UTC-8 dmo...@deductivepress.ca 
> wrote:
>
>> I failed to build 9.5rc0 on MacOS 11.5.2 after "make distclean", because 
>> I got "ERROR: pplpy-0.8.6-cp39-cp39-macosx_11_0_x86_64.whl is not a 
>> supported wheel on this platform."  I know nothing about build systems, so 
>> I wouldn't be surprised if I'm doing something stupid, but I did know to do 
>> "source .homebrew-build-env" and ".bootstrap" before "./configure" and 
>> "make build", and I was able to build 9.5b9 again after this failure, so it 
>> seems to me that some commit is causing a problem for me.   I posted 
>> config.log  and 
>> pplpy-0.8.6.log 
>>  on the 
>> internet.
>>
>> Suggestions or a diagnosis are welcome.  (Perhaps I should learn how to 
>> use conda?)
>>
>> Best,
>> Dave
>>
>> On Tuesday, January 11, 2022 at 1:08:35 PM UTC-7 Sébastien Labbé wrote:
>>
>>> Dear Volker,
>>>
>>> I would also like to ask whether it is possible to include
>>> https://trac.sagemath.org/ticket/20343
>>> in the next rc? It got a positive review last Thursday. It adds a new 
>>> module sage/plot/tikzpicture.py to deal with tikzpicture, show them 
>>> automatically in a Jupyter cell and export them to various format (pdf, 
>>> png, svg), etc. The module was in preparation in my personnal package since 
>>> 6 years. It is now mature enough to go into Sage. I know few people who 
>>> install my package only for that module. I think it will be a nice new 
>>> feature for 9.5.
>>>
>>> Note: it can go with or without the dependency 
>>> https://trac.sagemath.org/ticket/33005
>>>
>>> Sincerely,
>>>
>>> Sébastien
>>>
>>>
>>>
>>>
>>> On Monday, January 10, 2022 at 5:27:11 PM UTC+1 egourg...@gmail.com 
>>> wrote:
>>>
 Hi Volker,

 Thank you for this release. 
 Would it be possible to include 
 https://trac.sagemath.org/ticket/30362 
 in the next rc if any? This ticket has been in positive review state 
 for 17 days; it introduces symplectic structures on manifolds and it would 
 be nice if Sage 9.5 is shipped with them. Thank you. 

 Eric.



-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/948a5e06-c2aa-41f8-b533-755a82bc0e41n%40googlegroups.com.

[sage-release] Re: Sage 9.5.rc0 released

[Matthias Köppe]

The python3 used in this build is 
/Library/Frameworks/Python.framework/Versions/3.9/bin/python3 
-- could you check which version this is and do you recall how you 
installed it?


On Tuesday, January 11, 2022 at 4:19:41 PM UTC-8 dmo...@deductivepress.ca 
wrote:

> I failed to build 9.5rc0 on MacOS 11.5.2 after "make distclean", because I 
> got "ERROR: pplpy-0.8.6-cp39-cp39-macosx_11_0_x86_64.whl is not a supported 
> wheel on this platform."  I know nothing about build systems, so I wouldn't 
> be surprised if I'm doing something stupid, but I did know to do "source 
> .homebrew-build-env" and ".bootstrap" before "./configure" and "make 
> build", and I was able to build 9.5b9 again after this failure, so it seems 
> to me that some commit is causing a problem for me.   I posted config.log 
>  and pplpy-0.8.6.log 
>  on the 
> internet.
>
> Suggestions or a diagnosis are welcome.  (Perhaps I should learn how to 
> use conda?)
>
> Best,
> Dave
>
> On Tuesday, January 11, 2022 at 1:08:35 PM UTC-7 Sébastien Labbé wrote:
>
>> Dear Volker,
>>
>> I would also like to ask whether it is possible to include
>> https://trac.sagemath.org/ticket/20343
>> in the next rc? It got a positive review last Thursday. It adds a new 
>> module sage/plot/tikzpicture.py to deal with tikzpicture, show them 
>> automatically in a Jupyter cell and export them to various format (pdf, 
>> png, svg), etc. The module was in preparation in my personnal package since 
>> 6 years. It is now mature enough to go into Sage. I know few people who 
>> install my package only for that module. I think it will be a nice new 
>> feature for 9.5.
>>
>> Note: it can go with or without the dependency 
>> https://trac.sagemath.org/ticket/33005
>>
>> Sincerely,
>>
>> Sébastien
>>
>>
>>
>>
>> On Monday, January 10, 2022 at 5:27:11 PM UTC+1 egourg...@gmail.com 
>> wrote:
>>
>>> Hi Volker,
>>>
>>> Thank you for this release. 
>>> Would it be possible to include 
>>> https://trac.sagemath.org/ticket/30362 
>>> in the next rc if any? This ticket has been in positive review state for 
>>> 17 days; it introduces symplectic structures on manifolds and it would be 
>>> nice if Sage 9.5 is shipped with them. Thank you. 
>>>
>>> Eric.
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/d2a4b9e9-c248-4888-8a19-58007550cff3n%40googlegroups.com.

[sage-release] Re: Sage 9.5.rc0 released

[Dave Morris]

I failed to build 9.5rc0 on MacOS 11.5.2 after "make distclean", because I 
got "ERROR: pplpy-0.8.6-cp39-cp39-macosx_11_0_x86_64.whl is not a supported 
wheel on this platform."  I know nothing about build systems, so I wouldn't 
be surprised if I'm doing something stupid, but I did know to do "source 
.homebrew-build-env" and ".bootstrap" before "./configure" and "make 
build", and I was able to build 9.5b9 again after this failure, so it seems 
to me that some commit is causing a problem for me.   I posted config.log 
 and pplpy-0.8.6.log 
 on the internet.

Suggestions or a diagnosis are welcome.  (Perhaps I should learn how to use 
conda?)

Best,
Dave

On Tuesday, January 11, 2022 at 1:08:35 PM UTC-7 Sébastien Labbé wrote:

> Dear Volker,
>
> I would also like to ask whether it is possible to include
> https://trac.sagemath.org/ticket/20343
> in the next rc? It got a positive review last Thursday. It adds a new 
> module sage/plot/tikzpicture.py to deal with tikzpicture, show them 
> automatically in a Jupyter cell and export them to various format (pdf, 
> png, svg), etc. The module was in preparation in my personnal package since 
> 6 years. It is now mature enough to go into Sage. I know few people who 
> install my package only for that module. I think it will be a nice new 
> feature for 9.5.
>
> Note: it can go with or without the dependency 
> https://trac.sagemath.org/ticket/33005
>
> Sincerely,
>
> Sébastien
>
>
>
>
> On Monday, January 10, 2022 at 5:27:11 PM UTC+1 egourg...@gmail.com wrote:
>
>> Hi Volker,
>>
>> Thank you for this release. 
>> Would it be possible to include 
>> https://trac.sagemath.org/ticket/30362 
>> in the next rc if any? This ticket has been in positive review state for 
>> 17 days; it introduces symplectic structures on manifolds and it would be 
>> nice if Sage 9.5 is shipped with them. Thank you. 
>>
>> Eric.
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/cef6a584-f501-4684-839c-57d6690929e0n%40googlegroups.com.

Re: [sage-release] Github changes

[David Coudert]

I experienced the same issue and did git clone  
https://github.com/sagemath/sage.git .
It’s working fine now.

Git trac is still working well so far.

David.

> Le 11 janv. 2022 à 22:08, 'Justin C. Walker' via sage-release 
>  a écrit :
> 
> 
> 
>> On Jan 11, 2022, at 12:55 , Dima Pasechnik  wrote:
>> 
>> On Tue, Jan 11, 2022 at 8:52 PM 'Justin C. Walker' via sage-release
>>  wrote:
>>> 
>>> This is somewhat off-topic, but I just ran into an issue with GitHub, and I 
>>> am not sure how to handle it.
>>> 
>>> I use this command to “git” the sage tree when Volker announces a new one:
>>> git clone git://github.com/sagemath/sage.git
>>> 
>> 
>> try
>> 
>> git clone  https://github.com/sagemath/sage.git
> 
> D’oh!  I would have tried that if I could spell.
> 
> Thanks, Dima, worked like a champ.
> 
> Justin
> 
> --
> Justin C. Walker, Curmudgeon-At-Large
> Institute for the Absorption of Federal Funds
> 
> If you're not confused,
> You're not paying attention
> 
> 
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "sage-release" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to sage-release+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/sage-release/0AF4E63D-6F64-4B5A-8A59-2D3B62C95940%40mac.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/68EC77A3-9942-4CF1-BC0F-DE56913D4E00%40gmail.com.

Re: [sage-release] Github changes

['Justin C. Walker' via sage-release]

> On Jan 11, 2022, at 12:55 , Dima Pasechnik  wrote:
> 
> On Tue, Jan 11, 2022 at 8:52 PM 'Justin C. Walker' via sage-release
>  wrote:
>> 
>> This is somewhat off-topic, but I just ran into an issue with GitHub, and I 
>> am not sure how to handle it.
>> 
>> I use this command to “git” the sage tree when Volker announces a new one:
>> git clone git://github.com/sagemath/sage.git
>> 
> 
> try
> 
> git clone  https://github.com/sagemath/sage.git

D’oh!  I would have tried that if I could spell.

Thanks, Dima, worked like a champ.

Justin

--
Justin C. Walker, Curmudgeon-At-Large
Institute for the Absorption of Federal Funds

If you're not confused,
You're not paying attention




-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/0AF4E63D-6F64-4B5A-8A59-2D3B62C95940%40mac.com.

Re: [sage-release] Github changes

[Dima Pasechnik]

On Tue, Jan 11, 2022 at 8:52 PM 'Justin C. Walker' via sage-release
 wrote:
>
> This is somewhat off-topic, but I just ran into an issue with GitHub, and I 
> am not sure how to handle it.
>
> I use this command to “git” the sage tree when Volker announces a new one:
> git clone git://github.com/sagemath/sage.git
>

try

git clone  https://github.com/sagemath/sage.git

HTH
Dima

> I now get an immediate response:
> fatal: remote error:
>   The unauthenticated git protocol on port 9418 is no longer supported.
> Please see 
> https://github.blog/2021-09-01-improving-git-protocol-security-github/ for 
> more information.
>
> I looked at the web page mentioned, and, if I understand what is described 
> (not entirely clear), I just need to replace “git:” with “https:”.  But the 
> next paragraph mentions that they have removed support for passwords over 
> HTTPS.
>
> So I’m a bit confused.  Was this discussed on Sage lists?
>
> Thanks for pointers or hints!
>
> Justin
>
> PS: the change happened in the last day or so; I had cloned the tree a day or 
> two ago on other systems without problems
>
> --
> Justin C. Walker, Curmudgeon-At-Large
> Institute for the Absorption of Federal Funds
> 
> If you're not confused,
> You're not paying attention
> 
>
>
>
> --
> You received this message because you are subscribed to the Google Groups 
> "sage-release" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to sage-release+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/sage-release/2A4C9EF3-7F24-4E1B-B549-B1E878CE0E53%40mac.com.

-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/CAAWYfq3_1iwn%2BbcFK2LVHZRwE8MrTREmdn5dkBt%3DqrcWSeUCnQ%40mail.gmail.com.

[sage-release] Github changes

['Justin C. Walker' via sage-release]

This is somewhat off-topic, but I just ran into an issue with GitHub, and I am 
not sure how to handle it.

I use this command to “git” the sage tree when Volker announces a new one:
git clone git://github.com/sagemath/sage.git

I now get an immediate response:
fatal: remote error: 
  The unauthenticated git protocol on port 9418 is no longer supported.
Please see 
https://github.blog/2021-09-01-improving-git-protocol-security-github/ for more 
information.

I looked at the web page mentioned, and, if I understand what is described (not 
entirely clear), I just need to replace “git:” with “https:”.  But the next 
paragraph mentions that they have removed support for passwords over HTTPS.

So I’m a bit confused.  Was this discussed on Sage lists?  

Thanks for pointers or hints!

Justin

PS: the change happened in the last day or so; I had cloned the tree a day or 
two ago on other systems without problems

--
Justin C. Walker, Curmudgeon-At-Large
Institute for the Absorption of Federal Funds

If you're not confused,
You're not paying attention




-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/2A4C9EF3-7F24-4E1B-B549-B1E878CE0E53%40mac.com.

[sage-release] Re: Sage 9.5.rc0 released

[Sébastien Labbé]

Dear Volker,

I would also like to ask whether it is possible to include
https://trac.sagemath.org/ticket/20343
in the next rc? It got a positive review last Thursday. It adds a new 
module sage/plot/tikzpicture.py to deal with tikzpicture, show them 
automatically in a Jupyter cell and export them to various format (pdf, 
png, svg), etc. The module was in preparation in my personnal package since 
6 years. It is now mature enough to go into Sage. I know few people who 
install my package only for that module. I think it will be a nice new 
feature for 9.5.

Note: it can go with or without the dependency 
https://trac.sagemath.org/ticket/33005

Sincerely,

Sébastien




On Monday, January 10, 2022 at 5:27:11 PM UTC+1 egourg...@gmail.com wrote:

> Hi Volker,
>
> Thank you for this release. 
> Would it be possible to include 
> https://trac.sagemath.org/ticket/30362 
> in the next rc if any? This ticket has been in positive review state for 
> 17 days; it introduces symplectic structures on manifolds and it would be 
> nice if Sage 9.5 is shipped with them. Thank you. 
>
> Eric.
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/48967a80-a996-4d9b-965f-06322c411f0en%40googlegroups.com.

Re: [sage-release] Sage 9.5.rc0 released

[Samuel Lelièvre]

2022-01-11 11:31 UTC, Vincent Delecroix on sage-release:
>
> Got a matplotlib related doctest failure in graph plotting
> (via elliptic curves on this example)

Maybe related to this recently opened ticket:

- Sage Trac ticket 33143
  Matplotlib update breaks build on debian buster
  https://trac.sagemath.org/ticket/33143

It already has positive review.   --Samuel

-- 
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/CAEcArF2xV8swA%2BaDpTDB2-_opBTm0dAhDs6c5cBRw_vKjHbvYw%40mail.gmail.com.

Re: [sage-release] Sage 9.5.rc0 released

[Vincent Delecroix]

Got a matplotlib related doctest failure in graph plotting (via
elliptic curves on this example)

File "ell_number_field.py", line 2752, in 
sage.schemes.elliptic_curves.ell_number_field.EllipticCurve_number_field.isogeny_class

Failed example:
G.show(edge_labels=True) # long time
Exception raised:
...
  File "sage.schemes.elliptic_curves.ell_number_field.EllipticCurve_number_field.isogeny_class[9]>", 
line 1, in 

G.show(edge_labels=True) # long time
...
  File ".../matplotlib/cbook/__init__.py", line 518, in _get_data_path
return Path(matplotlib.get_data_path(), *args)
AttributeError: module 'matplotlib' has no attribute 'get_data_path'

My sage installation is built from source (using matplotlib 3.5.1 from
source).

Best
Vincent

Le 09/01/2022 à 12:15, Volker Braun a écrit :

As always, you can get the latest beta version from the "develop" git
branch. Alternatively, the self-contained source tarball is at
http://www.sagemath.org/download-latest.html

38323507f6 (tag: 9.5.rc0, trac/develop) Updated SageMath version to 9.5.rc0
464e8c3d08 Trac #33104: Fix references to `doc-clean`
22001aa722 Trac #32759: ./configure --disable-doc
d5d2b5b0ed Trac #32860: Inaccurate documentation for number field
elements_of_norm
e0ffa0f92d Trac #33097: some typos in combinat and modular
396023cf78 Trac #33087: build/bin/sage-clone-source: Use "trac" as name of
the remote
771546ff82 Trac #33046: gap spkg creates absolute symlinks
be94896c70 Trac #32990: pickling support for real balls and related objects
81cc1a8156 Trac #32977: sage.features: Remove dependency on
sage.misc.lazy_string
0cb2c8e457 Trac #32938: deactivation of the u-prefix doctest handler
c1f5a61578 Trac #32245: Quaternion ideals sometimes compare incorrectly
969746aadc Trac #30875: Random elements of AA aren't random
fe53f67ecd Trac #29784: Update section "Sage Development Process" in
Developer's Guide
52f8223178 Trac #33080: Fix scipy-1.7.2 build failure on Cygwin
3bd8aedeb2 Trac #32868: configure tarball misses some generated files
283fef85db Trac #33036: random doctest failure in src/sage/crypto/util.py
b0b05d9493 Trac #32980: unmarked # long time tests in
graphs/generators/classical_geometries.py
4990807a40 Trac #32972: Unmarked # long time tests in
characteristic_cohomology_class.py
4929c5dd64 Trac #32971: unmarked # long time tests in ell_number_field.py
40a9c26056 Trac #30677: Add VS Code config for SAGE_ROOT/venv
e78700a067 Trac #33068: GH Actions: Remove ubuntu-groovy
1100bbaade Trac #33058: doctest in generic_graph.py can fail due to
rounding error
7155edaef4 Trac #33019: remove more py2 or py3 tags in doctests
897e8e6d21 Trac #33031: add tolerance to is_hermitian() for sparse "double"
matrices
7c823e63ad Trac #32904: Add version constraints for sage-conf, clean the
sage-conf sdist
9fb5ea945f Trac #31672: Invalid latex repr from FreeAlgebra _latex_ /
repr_lincomb
d6ac8199bc Trac #32062: GH Actions: Deploy sdists to PyPI
646bd9f4a8 Trac #33066: OpenSSL 3.0.1 security update
c4f76c053f Trac #32703: GH Actions (macOS): Run a job for "make
build-local" first, cache image for job "make build"
039a909b6f Trac #32113: GH Actions: conda-forge tests broken
935315f002 Trac #30766: Experimental support for Python 3.10 in Sage 9.5
a34b9801ab Trac #33057: fix incorrect doctest in solve_integer of binary
quadratic forms
3273e8aff6 Trac #33067: tox / GH Actions: Fix docker-based tests after
#31386
bd2a8371f0 Trac #29039: pip-installable version of package sage_conf -
installs non-Python bits of the Sage distribution in ~/.sage/
0cd457a745 Trac #33082: segfault: illegal (popcnt) instruction in primecount
cd124899d0 Trac #33073: Segmentation fault in face iterator (still)
da90b23cc9 Trac #29310: "make distclean" should not run "./configure"
c9093db43b Trac #13637: Add multiplicative order to complex interval field
fd0fbb9118 Trac #33040: Update matplotlib to 3.5
31d2b1c069 Trac #33012: Bug in bitset_copy_flex
02e8c4cca0 Trac #32676: logic.print_table changes your truthtable
c2810fce48 Trac #31580: Update matplotlib to 3.4
6fac484bc0 Trac #33060: pytest: Declare dependencies
599ced4e9f Trac #33059: conda-forge-macos-standard: pyzmq build fails
13a6210d75 Trac #33043: Upgrade: lcalc 2.0.5 to allow building on Cygwin
e39ff7d436 Trac #33042: givaro spkg-configure: Reject too new versions
2f510446d6 Trac #32907: Update singular to 4.2.1p3
c5af19568c (tag: 9.5.beta9) Updated SageMath version to 9.5.beta9



--
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/0d69745f-3c87-ad40-d038-a0d366f4c65e%40gmail.com.

Re: [sage-release] Sage 9.5.rc0 released

[Vincent Delecroix]

Got a matplotlib related doctest failure in graph plotting (via
elliptic curves on this example)

File "ell_number_field.py", line 2752, in 
sage.schemes.elliptic_curves.ell_number_field.EllipticCurve_number_field.isogeny_class

Failed example:
G.show(edge_labels=True) # long time
Exception raised:
...
  File "sage.schemes.elliptic_curves.ell_number_field.EllipticCurve_number_field.isogeny_class[9]>", 
line 1, in 

G.show(edge_labels=True) # long time
...
  File ".../matplotlib/cbook/__init__.py", line 518, in _get_data_path
return Path(matplotlib.get_data_path(), *args)
AttributeError: module 'matplotlib' has no attribute 'get_data_path'

My sage installation is built from source (using matplotlib 3.5.1 from
source).

Best
Vincent

Le 09/01/2022 à 12:15, Volker Braun a écrit :

As always, you can get the latest beta version from the "develop" git
branch. Alternatively, the self-contained source tarball is at
http://www.sagemath.org/download-latest.html

38323507f6 (tag: 9.5.rc0, trac/develop) Updated SageMath version to 9.5.rc0
464e8c3d08 Trac #33104: Fix references to `doc-clean`
22001aa722 Trac #32759: ./configure --disable-doc
d5d2b5b0ed Trac #32860: Inaccurate documentation for number field
elements_of_norm
e0ffa0f92d Trac #33097: some typos in combinat and modular
396023cf78 Trac #33087: build/bin/sage-clone-source: Use "trac" as name of
the remote
771546ff82 Trac #33046: gap spkg creates absolute symlinks
be94896c70 Trac #32990: pickling support for real balls and related objects
81cc1a8156 Trac #32977: sage.features: Remove dependency on
sage.misc.lazy_string
0cb2c8e457 Trac #32938: deactivation of the u-prefix doctest handler
c1f5a61578 Trac #32245: Quaternion ideals sometimes compare incorrectly
969746aadc Trac #30875: Random elements of AA aren't random
fe53f67ecd Trac #29784: Update section "Sage Development Process" in
Developer's Guide
52f8223178 Trac #33080: Fix scipy-1.7.2 build failure on Cygwin
3bd8aedeb2 Trac #32868: configure tarball misses some generated files
283fef85db Trac #33036: random doctest failure in src/sage/crypto/util.py
b0b05d9493 Trac #32980: unmarked # long time tests in
graphs/generators/classical_geometries.py
4990807a40 Trac #32972: Unmarked # long time tests in
characteristic_cohomology_class.py
4929c5dd64 Trac #32971: unmarked # long time tests in ell_number_field.py
40a9c26056 Trac #30677: Add VS Code config for SAGE_ROOT/venv
e78700a067 Trac #33068: GH Actions: Remove ubuntu-groovy
1100bbaade Trac #33058: doctest in generic_graph.py can fail due to
rounding error
7155edaef4 Trac #33019: remove more py2 or py3 tags in doctests
897e8e6d21 Trac #33031: add tolerance to is_hermitian() for sparse "double"
matrices
7c823e63ad Trac #32904: Add version constraints for sage-conf, clean the
sage-conf sdist
9fb5ea945f Trac #31672: Invalid latex repr from FreeAlgebra _latex_ /
repr_lincomb
d6ac8199bc Trac #32062: GH Actions: Deploy sdists to PyPI
646bd9f4a8 Trac #33066: OpenSSL 3.0.1 security update
c4f76c053f Trac #32703: GH Actions (macOS): Run a job for "make
build-local" first, cache image for job "make build"
039a909b6f Trac #32113: GH Actions: conda-forge tests broken
935315f002 Trac #30766: Experimental support for Python 3.10 in Sage 9.5
a34b9801ab Trac #33057: fix incorrect doctest in solve_integer of binary
quadratic forms
3273e8aff6 Trac #33067: tox / GH Actions: Fix docker-based tests after
#31386
bd2a8371f0 Trac #29039: pip-installable version of package sage_conf -
installs non-Python bits of the Sage distribution in ~/.sage/
0cd457a745 Trac #33082: segfault: illegal (popcnt) instruction in primecount
cd124899d0 Trac #33073: Segmentation fault in face iterator (still)
da90b23cc9 Trac #29310: "make distclean" should not run "./configure"
c9093db43b Trac #13637: Add multiplicative order to complex interval field
fd0fbb9118 Trac #33040: Update matplotlib to 3.5
31d2b1c069 Trac #33012: Bug in bitset_copy_flex
02e8c4cca0 Trac #32676: logic.print_table changes your truthtable
c2810fce48 Trac #31580: Update matplotlib to 3.4
6fac484bc0 Trac #33060: pytest: Declare dependencies
599ced4e9f Trac #33059: conda-forge-macos-standard: pyzmq build fails
13a6210d75 Trac #33043: Upgrade: lcalc 2.0.5 to allow building on Cygwin
e39ff7d436 Trac #33042: givaro spkg-configure: Reject too new versions
2f510446d6 Trac #32907: Update singular to 4.2.1p3
c5af19568c (tag: 9.5.beta9) Updated SageMath version to 9.5.beta9



--
You received this message because you are subscribed to the Google Groups 
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/sage-release/0340b0bd-e6c9-fd43-f55d-b272379e4d99%40gmail.com.