[sage-support] Re: Sage 3.0.4 Fails with "ImportError"
Michael, That did the trick. Sage finished compiling and passed all its tests. Thank you very much. Roberto > Hi Robert, > > I looked at your build log you send me off list and lcalc failed to > build. I suspect it is due to some CFLAG option we set, namely using "- > static-libgcc". According to the log this was added a while back, but > I see no reason to add it at all. Can you take the spkg at > > http://sage.math.washington.edu/home/mabshoff/lcalc-20080205.p2.spkg > > and put it into $SAGE_ROOT/spkg/standard and run "make" again from > $SAGE_ROOT since you did not finish building Sage. Let me know how it > goes. > > Cheers, > > Michael --~--~-~--~~~---~--~~ To post to this group, send email to sage-support@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/sage-support URLs: http://www.sagemath.org -~--~~~~--~~--~--~---
[sage-support] Re: Sage 3.0.4 Fails with "ImportError"
Hi Robert, I looked at your build log you send me off list and lcalc failed to build. I suspect it is due to some CFLAG option we set, namely using "- static-libgcc". According to the log this was added a while back, but I see no reason to add it at all. Can you take the spkg at http://sage.math.washington.edu/home/mabshoff/lcalc-20080205.p2.spkg and put it into $SAGE_ROOT/spkg/standard and run "make" again from $SAGE_ROOT since you did not finish building Sage. Let me know how it goes. Cheers, Michael --~--~-~--~~~---~--~~ To post to this group, send email to sage-support@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/sage-support URLs: http://www.sagemath.org -~--~~~~--~~--~--~---
[sage-support] Re: Sage 3.0.4 Fails with "ImportError"
On Jul 10, 6:30 pm, Roberto Dominijanni <[EMAIL PROTECTED]> wrote: Hi Roberto, > Sage 3.0.4 compiled successfully on a system with two 3 Gb Xeon > processors running the AMD64 flavor of ubuntu-8.04. Invoking sage from > the command prompt gives the following: > > ImportError: No module named processing > > Any ideas on how I can go about fixing this? The Pyprocessing module was not installed/compiled properly. This indicates that the build did not finish and/or something bad happened. Please upload install.log to some place and post a link so I can take a closer look. > Regards, > > Roberto Dominijanni Cheers, Michael --~--~-~--~~~---~--~~ To post to this group, send email to sage-support@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/sage-support URLs: http://www.sagemath.org -~--~~~~--~~--~--~---
