RE: [SA-list] Command not running
Maybe you can make future option (on the wish list for v6 ?) with the schedule to receive missed alert due to schedule when schedule's first time is reached (a sort of queue) Same issue here : some notifications i don't wish to receive at night via SMS/Mobile email, but i like to know something happened first thing in the morning around 7.30. Now i've set these alerts like you mentioned: 2 times down and every 15 cycles (cycle time 2 minutes) so when schedule is not allowing messages (22.00-07.00) i'll receive one between 7.00 and 7.30, but i still miss up/down situations at night and get an alert every 30 mins during a day. Can you put this on the 'wish-list'?? Met vriendelijke groet, Mike Roelofs UC Systems B.V. E-mail : [EMAIL PROTECTED] -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Dirk Bulinckx Verzonden: dinsdag 20 april 2004 6:51 Aan: [EMAIL PROTECTED] Onderwerp: RE: [SA-list] Command not running The only way I can see to have the alert is to set the alert to 3 times down (and then every 5 (example)) and back up BUT this will give you more alerts then requested however. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Tuesday, April 20, 2004 1:55 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Yes, i think this is one possible situation. What could i do to be alerted at 8pm ? In others situations, i don't have receive a mail with A 24h/24 scheduler. I made some tests and contact you. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Dirk Bulinckx Envoye : lundi 19 avril 2004 19:01 A : [EMAIL PROTECTED] Objet : RE: [SA-list] Command not running Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Monday, April 19, 2004 1:41 AM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running Sorry for my poor english. I own en entreprise Version to use schedulers. SA check web sites and mails server. 3 differents actions are sends on each alarm : one mail (1 times down and backup) 24/24 one SMS with Command script (2 times down and backup) during the Night only one phone call with Command script (3 times down and backup) during the Night only When all the schedules are ok. no commands are launch. When i disable the schedule all commands are perfectly launch. I've tried many possibilities, some time it works, some time it doesn't. Can't find a rule. it give me some stress. Thanks for your Help. Best regards. Yann URBES Antipode tele services www.antipode.biz skype : antipode_teleservices New Caledonia --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus
RE: [SA-list] Command not running
So you even would want to get all the up/down/up of the night after the schedule? This could be a lot of useless alerts. I can understand that you want to know that the problem is still active ... Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Roelofs Sent: Tuesday, April 20, 2004 8:00 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Maybe you can make future option (on the wish list for v6 ?) with the schedule to receive missed alert due to schedule when schedule's first time is reached (a sort of queue) Same issue here : some notifications i don't wish to receive at night via SMS/Mobile email, but i like to know something happened first thing in the morning around 7.30. Now i've set these alerts like you mentioned: 2 times down and every 15 cycles (cycle time 2 minutes) so when schedule is not allowing messages (22.00-07.00) i'll receive one between 7.00 and 7.30, but i still miss up/down situations at night and get an alert every 30 mins during a day. Can you put this on the 'wish-list'?? Met vriendelijke groet, Mike Roelofs UC Systems B.V. E-mail : [EMAIL PROTECTED] -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Dirk Bulinckx Verzonden: dinsdag 20 april 2004 6:51 Aan: [EMAIL PROTECTED] Onderwerp: RE: [SA-list] Command not running The only way I can see to have the alert is to set the alert to 3 times down (and then every 5 (example)) and back up BUT this will give you more alerts then requested however. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Tuesday, April 20, 2004 1:55 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Yes, i think this is one possible situation. What could i do to be alerted at 8pm ? In others situations, i don't have receive a mail with A 24h/24 scheduler. I made some tests and contact you. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Dirk Bulinckx Envoye : lundi 19 avril 2004 19:01 A : [EMAIL PROTECTED] Objet : RE: [SA-list] Command not running Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Monday, April 19, 2004 1:41 AM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running Sorry for my poor english. I own en entreprise Version to use schedulers. SA check web sites and mails server. 3 differents actions are sends on each alarm : one mail (1 times down and backup) 24/24 one SMS with Command script (2 times down and backup) during the Night only one phone call with Command script (3 times down and backup) during the Night only When all the schedules are ok. no commands are launch. When i disable the schedule all commands are perfectly launch. I've tried many possibilities, some time it works, some time it doesn't. Can't find a rule. it give me some stress. Thanks for your Help. Best regards. Yann URBES Antipode tele services www.antipode.biz skype : antipode_teleservices New Caledonia --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL
RE: [SA-list] Command not running
What I do via our production scheduleing software (AutoMate) is trigger an Overnight report through MS Access that gets emailed to the IS Staff every morning at 8:00am. There is also a weekend report for Monday am. This way we get a recap of all the status changes from 5:00pm the previous day (or 3 days prior for the Monday report) to when the report is run at 8. We also do an executive weekly recap for the Monday AM meetings. Perhaps in V6 an option would be to put this kind of functionlity into SA directly. It could be an extension of the built in HTML output, that not only gets written to a file, but then also is emailed. You could add an option in each test for weather or not it should be included on the recap reports, just like is done now for inclusion on HTML pages. Michael Shook Technical Analyst Saddle Creek Corporation 723 Joe Tamplin Industrial Blvd Macon GA 31217 478 742 8740 ext. 105 (work) 478 256 9318 (mobile) 478 742 7917 (fax) [EMAIL PROTECTED] http://www.saddlecrk.com [EMAIL PROTECTED] 04/20/04 06:00AM So you even would want to get all the up/down/up of the night after the schedule? This could be a lot of useless alerts. I can understand that you want to know that the problem is still active ... Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Roelofs Sent: Tuesday, April 20, 2004 8:00 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Maybe you can make future option (on the wish list for v6 ?) with the schedule to receive missed alert due to schedule when schedule's first time is reached (a sort of queue) Same issue here : some notifications i don't wish to receive at night via SMS/Mobile email, but i like to know something happened first thing in the morning around 7.30. Now i've set these alerts like you mentioned: 2 times down and every 15 cycles (cycle time 2 minutes) so when schedule is not allowing messages (22.00-07.00) i'll receive one between 7.00 and 7.30, but i still miss up/down situations at night and get an alert every 30 mins during a day. Can you put this on the 'wish-list'?? Met vriendelijke groet, Mike Roelofs UC Systems B.V. E-mail : [EMAIL PROTECTED] -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Dirk Bulinckx Verzonden: dinsdag 20 april 2004 6:51 Aan: [EMAIL PROTECTED] Onderwerp: RE: [SA-list] Command not running The only way I can see to have the alert is to set the alert to 3 times down (and then every 5 (example)) and back up BUT this will give you more alerts then requested however. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Tuesday, April 20, 2004 1:55 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Yes, i think this is one possible situation. What could i do to be alerted at 8pm ? In others situations, i don't have receive a mail with A 24h/24 scheduler. I made some tests and contact you. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Dirk Bulinckx Envoye : lundi 19 avril 2004 19:01 A : [EMAIL PROTECTED] Objet : RE: [SA-list] Command not running Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards
RE: [SA-list] Command not running
Oké but in some circumstances those messages are pretty useful.. (like diskspace during night of a certain process) But the option of a active down condition would sure help a lot in most cases ! So please :-) Met vriendelijke groet, Mike Roelofs UC Systems B.V. E-mail : [EMAIL PROTECTED] -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Dirk Bulinckx Verzonden: dinsdag 20 april 2004 12:00 Aan: [EMAIL PROTECTED] Onderwerp: RE: [SA-list] Command not running So you even would want to get all the up/down/up of the night after the schedule? This could be a lot of useless alerts. I can understand that you want to know that the problem is still active ... Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Roelofs Sent: Tuesday, April 20, 2004 8:00 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Maybe you can make future option (on the wish list for v6 ?) with the schedule to receive missed alert due to schedule when schedule's first time is reached (a sort of queue) Same issue here : some notifications i don't wish to receive at night via SMS/Mobile email, but i like to know something happened first thing in the morning around 7.30. Now i've set these alerts like you mentioned: 2 times down and every 15 cycles (cycle time 2 minutes) so when schedule is not allowing messages (22.00-07.00) i'll receive one between 7.00 and 7.30, but i still miss up/down situations at night and get an alert every 30 mins during a day. Can you put this on the 'wish-list'?? Met vriendelijke groet, Mike Roelofs UC Systems B.V. E-mail : [EMAIL PROTECTED] -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Dirk Bulinckx Verzonden: dinsdag 20 april 2004 6:51 Aan: [EMAIL PROTECTED] Onderwerp: RE: [SA-list] Command not running The only way I can see to have the alert is to set the alert to 3 times down (and then every 5 (example)) and back up BUT this will give you more alerts then requested however. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Tuesday, April 20, 2004 1:55 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Yes, i think this is one possible situation. What could i do to be alerted at 8pm ? In others situations, i don't have receive a mail with A 24h/24 scheduler. I made some tests and contact you. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Dirk Bulinckx Envoye : lundi 19 avril 2004 19:01 A : [EMAIL PROTECTED] Objet : RE: [SA-list] Command not running Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Monday, April 19, 2004 1:41 AM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running Sorry for my poor english. I own en entreprise Version to use schedulers. SA check web sites and mails server. 3 differents actions are sends on each alarm : one mail (1 times down and backup) 24/24 one SMS with Command script (2 times down and backup) during the Night only one phone call with Command script (3 times down
RE: [SA-list] Command not running
Maybe in v5 :-) Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Roelofs Sent: Tuesday, April 20, 2004 2:30 PM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Oké but in some circumstances those messages are pretty useful.. (like diskspace during night of a certain process) But the option of a active down condition would sure help a lot in most cases ! So please :-) Met vriendelijke groet, Mike Roelofs UC Systems B.V. E-mail : [EMAIL PROTECTED] -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Dirk Bulinckx Verzonden: dinsdag 20 april 2004 12:00 Aan: [EMAIL PROTECTED] Onderwerp: RE: [SA-list] Command not running So you even would want to get all the up/down/up of the night after the schedule? This could be a lot of useless alerts. I can understand that you want to know that the problem is still active ... Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Roelofs Sent: Tuesday, April 20, 2004 8:00 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Maybe you can make future option (on the wish list for v6 ?) with the schedule to receive missed alert due to schedule when schedule's first time is reached (a sort of queue) Same issue here : some notifications i don't wish to receive at night via SMS/Mobile email, but i like to know something happened first thing in the morning around 7.30. Now i've set these alerts like you mentioned: 2 times down and every 15 cycles (cycle time 2 minutes) so when schedule is not allowing messages (22.00-07.00) i'll receive one between 7.00 and 7.30, but i still miss up/down situations at night and get an alert every 30 mins during a day. Can you put this on the 'wish-list'?? Met vriendelijke groet, Mike Roelofs UC Systems B.V. E-mail : [EMAIL PROTECTED] -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Dirk Bulinckx Verzonden: dinsdag 20 april 2004 6:51 Aan: [EMAIL PROTECTED] Onderwerp: RE: [SA-list] Command not running The only way I can see to have the alert is to set the alert to 3 times down (and then every 5 (example)) and back up BUT this will give you more alerts then requested however. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Tuesday, April 20, 2004 1:55 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Yes, i think this is one possible situation. What could i do to be alerted at 8pm ? In others situations, i don't have receive a mail with A 24h/24 scheduler. I made some tests and contact you. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Dirk Bulinckx Envoye : lundi 19 avril 2004 19:01 A : [EMAIL PROTECTED] Objet : RE: [SA-list] Command not running Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Monday, April 19, 2004 1:41 AM To: [EMAIL PROTECTED] Subject: [SA-list] Command
RE: [SA-list] Command not running
Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Monday, April 19, 2004 1:41 AM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running Sorry for my poor english. I own en entreprise Version to use schedulers. SA check web sites and mails server. 3 differents actions are sends on each alarm : one mail (1 times down and backup) 24/24 one SMS with Command script (2 times down and backup) during the Night only one phone call with Command script (3 times down and backup) during the Night only When all the schedules are ok. no commands are launch. When i disable the schedule all commands are perfectly launch. I've tried many possibilities, some time it works, some time it doesn't. Can't find a rule. it give me some stress. Thanks for your Help. Best regards. Yann URBES Antipode tele services www.antipode.biz skype : antipode_teleservices New Caledonia --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
RE: [SA-list] Command not running
Yes, i think this is one possible situation. What could i do to be alerted at 8pm ? In others situations, i don't have receive a mail with A 24h/24 scheduler. I made some tests and contact you. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Dirk Bulinckx Envoye : lundi 19 avril 2004 19:01 A : [EMAIL PROTECTED] Objet : RE: [SA-list] Command not running Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Monday, April 19, 2004 1:41 AM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running Sorry for my poor english. I own en entreprise Version to use schedulers. SA check web sites and mails server. 3 differents actions are sends on each alarm : one mail (1 times down and backup) 24/24 one SMS with Command script (2 times down and backup) during the Night only one phone call with Command script (3 times down and backup) during the Night only When all the schedules are ok. no commands are launch. When i disable the schedule all commands are perfectly launch. I've tried many possibilities, some time it works, some time it doesn't. Can't find a rule. it give me some stress. Thanks for your Help. Best regards. Yann URBES Antipode tele services www.antipode.biz skype : antipode_teleservices New Caledonia --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
RE: [SA-list] Command not running
The only way I can see to have the alert is to set the alert to 3 times down (and then every 5 (example)) and back up BUT this will give you more alerts then requested however. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Tuesday, April 20, 2004 1:55 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Yes, i think this is one possible situation. What could i do to be alerted at 8pm ? In others situations, i don't have receive a mail with A 24h/24 scheduler. I made some tests and contact you. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Dirk Bulinckx Envoye : lundi 19 avril 2004 19:01 A : [EMAIL PROTECTED] Objet : RE: [SA-list] Command not running Could it be the following situation? Example: entry URL check (1) with alert send SMTP mail WHEN 1 times down and back up (2) with alert command to execute (sms) WHEN 2 times down and back up SCHEDULE from 8pm until 6am (3) with alert command to execute WHEN 3 times down and backup SCHEDULe from 8pm until 6am 7:00pm URL check is down = SMTP mail is send 7:02pm next cycle and URL check is down again = nothing is done : the WHEN part of alert (2) says that it should be done however due to the schedule the alert is not send. 8:01pm URL is still down = this is the 31st cycle that it's down, so no additional alert should be done 8:03pm URL is sill down = this is the 32nd cylce that it's down, so no additional alert should be done First the WHEN part is evaluated and if that gives a true we check the schedule. At 7:02 (2nd down cycle) the WHEN part of (2) does gives up a TRUE (execute alert) BUT the schedule says not to do the alert, that's why there is no alert (2) done at that moment. Then at 8:01pm (first check after 8pm) the WHEN part of alert (2) is evaluated and gives a false (being don't do this alert), so we're not even checking the schedule. Could it be this condition? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yann URBES Sent: Monday, April 19, 2004 1:41 AM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running Sorry for my poor english. I own en entreprise Version to use schedulers. SA check web sites and mails server. 3 differents actions are sends on each alarm : one mail (1 times down and backup) 24/24 one SMS with Command script (2 times down and backup) during the Night only one phone call with Command script (3 times down and backup) during the Night only When all the schedules are ok. no commands are launch. When i disable the schedule all commands are perfectly launch. I've tried many possibilities, some time it works, some time it doesn't. Can't find a rule. it give me some stress. Thanks for your Help. Best regards. Yann URBES Antipode tele services www.antipode.biz skype : antipode_teleservices New Caledonia --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
[SA-list] Command not running
Sorry for my poor english. I own en entreprise Version to use schedulers. SA check web sites and mails server. 3 differents actions are sends on each alarm : one mail (1 times down and backup) 24/24 one SMS with Command script (2 times down and backup) during the Night only one phone call with Command script (3 times down and backup) during the Night only When all the schedules are ok. no commands are launch. When i disable the schedule all commands are perfectly launch. I've tried many possibilities, some time it works, some time it doesn't. Can't find a rule. it give me some stress. Thanks for your Help. Best regards. Yann URBES Antipode tele services www.antipode.biz skype : antipode_teleservices New Caledonia --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
[SA-list] Command not running
I have a check monitoring our website and when it is down, it is suppose to run a command (iisreset machinename). The logfile never shows the command executing. It executes at the same time it send the email (every 2 down cycles). Here is the appropriate portion of the log file. Tuesday, April 06, 2004 7:36:53 AM URL check (https://www.mwsco.com/Customer/Login.asp) failed due to 500 Internal Server Error(line 0) Tuesday, April 06, 2004 7:36:53 AM URL check took 62 ms Tuesday, April 06, 2004 7:36:53 AM TO convert : (PID= 1),(PID= 4) to [EMAIL PROTECTED],[EMAIL PROTECTED] Tuesday, April 06, 2004 7:36:53 AM Sending email message (extranet (https) is DOWN) Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) Tuesday, April 06, 2004 7:36:55 AM GetServiceStatus SMTPRA: Running Jason Passow [EMAIL PROTECTED] Mississippi Welders Supply Co. Phone: 507-454-5231 Fax: 507-454-8104
RE: [SA-list] Command not running
What version of SA? Make sure that the alert (that executes the command) has the exact same WHEN options. Dirk.Don't forget to vote for Servers Alive in the annual Sunbelt Target Awardshttp://www.sunbelt-software.com/targetawards/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason PassowSent: Tuesday, April 06, 2004 2:41 PMTo: [EMAIL PROTECTED]Subject: [SA-list] Command not running I have a check monitoring our website and when it is down, it is suppose to run a command (iisreset machinename). The logfile never shows the command executing. It executes at the same time it send the email (every 2 down cycles). Here is the appropriate portion of the log file. Tuesday, April 06, 2004 7:36:53 AM URL check (https://www.mwsco.com/Customer/Login.asp) failed due to 500 Internal Server Error(line 0) Tuesday, April 06, 2004 7:36:53 AM URL check took 62 ms Tuesday, April 06, 2004 7:36:53 AM TO convert : (PID= 1),(PID= 4) to [EMAIL PROTECTED],[EMAIL PROTECTED] Tuesday, April 06, 2004 7:36:53 AM Sending email message (extranet (https) is DOWN) Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) Tuesday, April 06, 2004 7:36:55 AM GetServiceStatus SMTPRA: Running Jason Passow [EMAIL PROTECTED] Mississippi Welders Supply Co. Phone: 507-454-5231 Fax: 507-454-8104
RE: [SA-list] Command not running
Version 1554 The only difference in the when option for the second email (Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) ) is when back up is not checked for the iisreset. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Tuesday, April 06, 2004 7:53 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running What version of SA? Make sure that the alert (that executes the command) has the exact same WHEN options. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Passow Sent: Tuesday, April 06, 2004 2:41 PM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running I have a check monitoring our website and when it is down, it is suppose to run a command (iisreset machinename). The logfile never shows the command executing. It executes at the same time it send the email (every 2 down cycles). Here is the appropriate portion of the log file. Tuesday, April 06, 2004 7:36:53 AM URL check (https://www.mwsco.com/Customer/Login.asp) failed due to 500 Internal Server Error(line 0) Tuesday, April 06, 2004 7:36:53 AM URL check took 62 ms Tuesday, April 06, 2004 7:36:53 AM TO convert : (PID= 1),(PID= 4) to [EMAIL PROTECTED],[EMAIL PROTECTED] Tuesday, April 06, 2004 7:36:53 AM Sending email message (extranet (https) is DOWN) Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) Tuesday, April 06, 2004 7:36:55 AM GetServiceStatus SMTPRA: Running Jason Passow [EMAIL PROTECTED] Mississippi Welders Supply Co. Phone: 507-454-5231 Fax: 507-454-8104
RE: [SA-list] Command not running
Can you retest with 4.1.1591? Dirk.Don't forget to vote for Servers Alive in the annual Sunbelt Target Awardshttp://www.sunbelt-software.com/targetawards/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason PassowSent: Tuesday, April 06, 2004 3:00 PMTo: [EMAIL PROTECTED]Subject: RE: [SA-list] Command not running Version 1554 The only difference in the when option for the second email (Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) ) is when back up is not checked for the iisreset. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk BulinckxSent: Tuesday, April 06, 2004 7:53 AMTo: [EMAIL PROTECTED]Subject: RE: [SA-list] Command not running What version of SA? Make sure that the alert (that executes the command) has the exact same WHEN options. Dirk.Don't forget to vote for Servers Alive in the annual Sunbelt Target Awardshttp://www.sunbelt-software.com/targetawards/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason PassowSent: Tuesday, April 06, 2004 2:41 PMTo: [EMAIL PROTECTED]Subject: [SA-list] Command not running I have a check monitoring our website and when it is down, it is suppose to run a command (iisreset machinename). The logfile never shows the command executing. It executes at the same time it send the email (every 2 down cycles). Here is the appropriate portion of the log file. Tuesday, April 06, 2004 7:36:53 AM URL check (https://www.mwsco.com/Customer/Login.asp) failed due to 500 Internal Server Error(line 0) Tuesday, April 06, 2004 7:36:53 AM URL check took 62 ms Tuesday, April 06, 2004 7:36:53 AM TO convert : (PID= 1),(PID= 4) to [EMAIL PROTECTED],[EMAIL PROTECTED] Tuesday, April 06, 2004 7:36:53 AM Sending email message (extranet (https) is DOWN) Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) Tuesday, April 06, 2004 7:36:55 AM GetServiceStatus SMTPRA: Running Jason Passow [EMAIL PROTECTED] Mississippi Welders Supply Co. Phone: 507-454-5231 Fax: 507-454-8104
RE: [SA-list] Command not running
Maybe it is not broke at the moment. Stand by until next down. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Tuesday, April 06, 2004 8:06 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Can you retest with 4.1.1591? Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Passow Sent: Tuesday, April 06, 2004 3:00 PM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running Version 1554 The only difference in the when option for the second email (Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) ) is when back up is not checked for the iisreset. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Tuesday, April 06, 2004 7:53 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Command not running What version of SA? Make sure that the alert (that executes the command) has the exact same WHEN options. Dirk. Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards http://www.sunbelt-software.com/targetawards/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Passow Sent: Tuesday, April 06, 2004 2:41 PM To: [EMAIL PROTECTED] Subject: [SA-list] Command not running I have a check monitoring our website and when it is down, it is suppose to run a command (iisreset machinename). The logfile never shows the command executing. It executes at the same time it send the email (every 2 down cycles). Here is the appropriate portion of the log file. Tuesday, April 06, 2004 7:36:53 AM URL check (https://www.mwsco.com/Customer/Login.asp) failed due to 500 Internal Server Error(line 0) Tuesday, April 06, 2004 7:36:53 AM URL check took 62 ms Tuesday, April 06, 2004 7:36:53 AM TO convert : (PID= 1),(PID= 4) to [EMAIL PROTECTED],[EMAIL PROTECTED] Tuesday, April 06, 2004 7:36:53 AM Sending email message (extranet (https) is DOWN) Tuesday, April 06, 2004 7:36:53 AM Sending email message (Mississippi Welders Supply Extranet is DOWN) Tuesday, April 06, 2004 7:36:55 AM GetServiceStatus SMTPRA: Running Jason Passow [EMAIL PROTECTED] Mississippi Welders Supply Co. Phone: 507-454-5231 Fax: 507-454-8104
