Re: Contiki progress?
On Thu, 12 Jun 2003 05:52:16 +0100 Gavin Smith [EMAIL PROTECTED] wrote: Anyone got *anywhere* with this on the SAM? :) I know there were a couple of guys looking at it a few months ago... I got somewhere. I endt up patching the compiler, getting som help from the compiler maintainer, fixing some code and still haven't compilled everything yet. :( I know Simon also was into it, but I don't know how far he got. -Frode -- ^ Frode Tennebø | email: [EMAIL PROTECTED] ^ | Ericsson AS | Isebakkeveien 49 | | N-1788 Halden | Phone: +47 67 25 09 39| | with Standard.Disclaimer; use Standard.Disclaimer;|
Re: Contiki progress?
I got somewhere. I endt up patching the compiler, getting som help from the compiler maintainer, fixing some code and still haven't compilled everything yet. :( I know Simon also was into it, but I don't know how far he got. Will that require something like this to work: h ttp://www.embeddedethernet.com/ Or can it be done over SLIP from a comms interface? Speaking of which, weren't there some modifications that needed to be made to the comms i/f to actually make the RS232 usable? And while I've thought of it, what was the mod to stop the ghosting on the video output - I might get one of these http://www.letsautomate.com/10894.cfm? to hook it up to my monitor, but if it's going to look as horrible as it does on my little SCART monitor I'm not sure I can justify the cost. Dan. Direct Line Group Services Limited, registered in England no.3001989, registered office 3 Edridge Road, Croydon, Surrey, CR9 1AG. The following are also members of the Direct Line group of companies: Direct Line Insurance plc, a member of the General Insurance Standards Council and Direct Line Life Insurance Company Limited and Direct Line Unit Trusts Limited, both regulated by the Financial Services Authority. Loans, Mortgages, Credit Cards and Savings provided by Direct Line Financial Services Limited, registered in England number 2372702, registered office 3 Edridge Road, Croydon, Surrey, CR9 1AG. All are members of The Royal Bank of Scotland Group. This e-mail is intended for the addressee only and may contain confidential, proprietary or legally privileged information. If you are not the intended recipient of this e-mail, you should notify us immediately and delete it. You should not copy, print, distribute, disclose or use any part of it. We reserve the right to monitor and record all electronic communications through our networks. We cannot accept any liability for viruses transmitted via this e-mail once it has left our networks.
Re: Contiki progress?
On Thu, 12 Jun 2003 09:21:56 +0100 [EMAIL PROTECTED] wrote: I got somewhere. I endt up patching the compiler, getting som help from the compiler maintainer, fixing some code and still haven't compilled everything yet. :( I know Simon also was into it, but I don't know how far he got. Will that require something like this to work: http://www.embeddedethernet.com/ Interesting. :) Or can it be done over SLIP from a comms interface? My initial idea was to use PPP over the emulated serial device in SimCoupe (since it's my current platform). Speaking of which, weren't there some modifications that needed to be made to the comms i/f to actually make the RS232 usable? Wasn't that just to make it compatible with PC mice? And while I've thought of it, what was the mod to stop the ghosting on the video output - I might get one of these http://www.letsautomate.com/10894.cfm? to hook it up to my monitor, but if it's going to look as horrible as it does on my little SCART monitor I'm not sure I can justify the cost. Short out inductor L5 (to the left of the ASIC) to remove video shadow. No warranties. :) Apropos: Does anybody have the scematics in digital format easily available? My printed copy is starting to fade. -Frode -- ^ Frode Tennebø | email: [EMAIL PROTECTED] ^ | Ericsson AS | Isebakkeveien 49 | | N-1788 Halden | Phone: +47 67 25 09 39| | with Standard.Disclaimer; use Standard.Disclaimer;|
Some news...
Hi! I've redesigned internal ATOM, so now I'm looking for orders, as the price is 25 EUR (without cable and power supply). The interfaces will be in July. Details on: http://groups.yahoo.com/group/zxvgs/files/hardware/ Is there a Sam emulator that simulates ATOM? I've downloaded the SimCoupe-0.81a-Win32.zip, but I have no idea how to enable the ATOM. Is there B-DOS version newer than 1.7? Is there a chance to force B-DOS to use the IDEDOS partition tables? http://nautilus.torch.net.pl/~yarek/zxvgs/en-idedos.html -- Yarek.