[Samba] printer settings not sticking
I am using samba version 3.0.2a and cups version 1.1.17. I have a BDC setup with 14 printers. Two of which are Lexmark Optra T616's. I have setup the printer drivers and printer settings by browsing to the BDC and going to the printers folder and changing the printer's properties. This has worked for all of the printers except for one of the T616's. This one printer accepts the printer driver setting and I can change the options for it (eg Setting size of trays and other options), but after hitting apply and OK, and then bringing the printer properties backup, the options are reset to their defaults. I can't get this one printers options to stick. I figure it has something to do with one of the .tdb files. I have tried removing all the .tdb files under the printers directory along with the ntprinters.tdb file which seems to make if "forget" all of the settings for all of the printers. I have also deleted and readded the printer in CUPS, but when setting this one printer up again, I still can't get it to "stick". I'm flat out of ideas for things to try. Dan -- --- Daniel T. Gynn RHCE #806200978201621 Essential Systems, Inc. 412-931-5403 ext. 1 fax: 412-931-5425 [EMAIL PROTECTED] GnuPG Key http://www.essensys.com/~dan/gpgring.asc Fingerprint: 0979 73B8 847A 349E 7363 66F4 6A79 DD72 495D CD60 signature.asc Description: This is a digitally signed message part -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] Printing issues w/ 3.x
I am using Samba 3.0.2a on Redhat 9 with CUPS 1.1.17. Since upgrading from Samba 2.2.8, I have been having various printing issues. 1) When printing to an HP LaserJet 4 through Samba, if I collate multiple pages from Word, it will print all the pages on one sheet. So, if I was two copies of two pages, it will print pages 1 and 2 on 1 sheet twice. If I setup a TCP port in windows that goes direct to the printer and install the print driver locally, it will print fine. 2) Lexmark printers no longer seem to be printing PDF files from Acrobat Reader. Printing from other applications seems fine. On a T612, a message is displayed "900 Service RIP Software" and locks up the printer. On a T616, the printer acts like it is going to print, but never does. 3) When not logged into the domain, but using a username and password that is in a printer admin @group, I can no longer edit printer properties on the server. If I log onto the domain with the same username/password, I can. Under 2.2.8, I didn't have to be logged into the domain. Is there a parameter that I can change to get back the old functionality? Thanks, Dan -- ------- Daniel T. Gynn RHCE #806200978201621 Essential Systems, Inc. 412-931-5403 ext. 1 fax: 412-931-5425 [EMAIL PROTECTED] GnuPG Key http://www.essensys.com/~dan/gpgring.asc Fingerprint: 0979 73B8 847A 349E 7363 66F4 6A79 DD72 495D CD60 signature.asc Description: This is a digitally signed message part -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
Re: [Samba] calculating passwords, and what to do with sambaLMPassword
I use mkntpwd to calculate LM and NT Passwords. It is in the examples
directory. The source is in there, so if you are just interested in
how, then you can look it up.
Dan
On Wed, 2004-02-18 at 13:13, Torben Thomsen wrote:
> Hi,
>
> I'm trying to calculate the passwords so i can change them from a
> php-gui, an as i see it, userPassword can have any form if the
> cryptation algorithm is stated before the hash, like "{md5}blahblah32bit"--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] USRMGR add groups
I am running samba 3.0.0. When using USRMGR most functionality works, but I can't get it to create a group. If I run the script by hand, it creates the UNIX group and echos out the GID. In Windows the error message is: "The following error occured creating the global group groupname: The group name could not be found" The delete user and delete group functions work, but give an error in USRMGR of "Access Denied". After refreshing USRMGR the user or group is gone. My guess is I am echoing something back that I shouldn't be, or am not echoing something that I should be. Thanks, Dan -- ------- Daniel T. Gynn RHCE #806200978201621 Essential Systems, Inc. 412-931-5403 ext. 1 fax: 412-931-5425 [EMAIL PROTECTED] GnuPG Key http://www.essensys.com/~dan/gpgring.asc Fingerprint: 0979 73B8 847A 349E 7363 66F4 6A79 DD72 495D CD60 signature.asc Description: This is a digitally signed message part -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
Re: [Samba] do not show printers?
Put browseable = no in the printers section On Fri, 2002-12-06 at 10:49, Markus Schabel wrote: > Hello! > > What can I do to tell samba to do not show the printers. I've configured > printing = no and removed the [printers]-Section, but I still see the > printers section when browsing the server. Any hints? > > regards > Markus Schabel > ++ > | TGM - Die Schule der Technik | > | IT-Service | > | A-1200 Wien, Wexstrasse 19-23 | > | Tel.: +43(1)33126/316 Fax: +43(1)33126/154 | > | eMail: [EMAIL PROTECTED]| > +--------+ -- --- Daniel T. Gynn RHCE #806200978201621 Essential Systems, Inc. 412-931-5403 ext. 1 fax: 412-931-5425 [EMAIL PROTECTED] GnuPG Key http://www.essensys.com/~dan/gpgring.asc Fingerprint: 1341 3132 FDAC C415 8F5F 03D7 FD4E 166B FA90 58E1 -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
Re: [Samba] cipsaddsmb UNSUCCESSFUL
Do you have the 'addprinter command' parameter set in smb.conf? If so, remove it On Mon, 2002-10-28 at 05:18, Kalkoul Morad wrote: > Hi, > > I have a linux box on RH7.3 with samba 2.2.5-1 and cups-1.1.14-15. > > I create a cups printer on to this machine with success, It called lptest? > and apparently, when I send a page test it works fine. > > But now I want to share It via Samba then I putted the different setting in > smb.conf . I extracted the different files from the ADOBE POSTSCRIPT DRIVER > and I put them in /usr/share/cups/drivers . After , I ran cupsaddsmb : > > # cupsaddsmb -v lptest > Password for root required to access localhost via SAMBA: > Running command: smbclient //localhost/print\$ -N -U'root%secret' -c 'mkdir > W32X86;put /var/spool/cups/tmp/3dbd0c8f9e398 W32X86/lptest.PPD;put > /usr/share/cups/drivers/ADOBEPS5.DLL W32X86/ADOBEPS5.DLL;put > /usr/share/cups/drivers/ADOBEPSU.DLL W32X86/ADOBEPSU.DLL;put > /usr/share/cups/drivers/ADOBEPSU.HLP W32X86/ADOBEPSU.HLP' > added interface ip=172.25.4.64 bcast=172.25.255.255 nmask=255.255.0.0 > Domain=[ARTE] OS=[Unix] Server=[Samba 2.2.5] > NT_STATUS_OBJECT_NAME_COLLISION making remote directory \W32X86 > putting file /var/spool/cups/tmp/3dbd0c8f9e398 as \W32X86/lptest.PPD (1797.7 > kb/s) (average 1797.7 kb/s) > putting file /usr/share/cups/drivers/ADOBEPS5.DLL as \W32X86/ADOBEPS5.DLL > (18619.7 kb/s) (average 11410.3 kb/s) > putting file /usr/share/cups/drivers/ADOBEPSU.DLL as \W32X86/ADOBEPSU.DLL > (17863.5 kb/s) (average 12749.7 kb/s) > putting file /usr/share/cups/drivers/ADOBEPSU.HLP as \W32X86/ADOBEPSU.HLP > (9575.2 kb/s) (average 12634.3 kb/s) > > Running command: smbclient //localhost/print\$ -N -U'root%secret' -c 'mkdir > WIN40;put /var/spool/cups/tmp/3dbd0c8f9e398 WIN40/lptest.PPD;put > /usr/share/cups/drivers/ADFONTS.MFM WIN40/ADFONTS.MFM;put > /usr/share/cups/drivers/ADOBEPS4.DRV WIN40/ADOBEPS4.DRV;put > /usr/share/cups/drivers/ADOBEPS4.HLP WIN40/ADOBEPS4.HLP;put > /usr/share/cups/drivers/DEFPRTR2.PPD WIN40/DEFPRTR2.PPD;put > /usr/share/cups/drivers/ICONLIB.DLL WIN40/ICONLIB.DLL;put > /usr/share/cups/drivers/PSMON.DLL WIN40/PSMON.DLL;' > added interface ip=172.25.4.64 bcast=172.25.255.255 nmask=255.255.0.0 > Domain=[ARTE] OS=[Unix] Server=[Samba 2.2.5] > NT_STATUS_OBJECT_NAME_COLLISION making remote directory \WIN40 > putting file /var/spool/cups/tmp/3dbd0c8f9e398 as \WIN40/lptest.PPD (1198.5 > kb/s) (average 1198.5 kb/s) > putting file /usr/share/cups/drivers/ADFONTS.MFM as \WIN40/ADFONTS.MFM > (18736.0 kb/s) (average 10428.8 kb/s) > putting file /usr/share/cups/drivers/ADOBEPS4.DRV as \WIN40/ADOBEPS4.DRV > (17604.6 kb/s) (average 14433.9 kb/s) > putting file /usr/share/cups/drivers/ADOBEPS4.HLP as \WIN40/ADOBEPS4.HLP > (12698.5 kb/s) (average 14231.8 kb/s) > putting file /usr/share/cups/drivers/DEFPRTR2.PPD as \WIN40/DEFPRTR2.PPD > (13153.0 kb/s) (average 14224.5 kb/s) > putting file /usr/share/cups/drivers/ICONLIB.DLL as \WIN40/ICONLIB.DLL > (19226.2 kb/s) (average 14420.7 kb/s) > putting file /usr/share/cups/drivers/PSMON.DLL as \WIN40/PSMON.DLL (13999.3 > kb/s) (average 14415.2 kb/s) > > Running command: rpcclient localhost -N -U'root%secret' -c 'adddriver > "Windows NT x86" > "lptest:ADOBEPS5.DLL:lptest.PPD:ADOBEPSU.DLL:ADOBEPSU.HLP:NULL:RAW:NULL"' > cmd = adddriver "Windows NT x86" > "lptest:ADOBEPS5.DLL:lptest.PPD:ADOBEPSU.DLL:ADOBEPSU.HLP:NULL:RAW:NULL" > result was NT_STATUS_UNSUCCESSFUL > > Running command: rpcclient localhost -N -U'root%secret' -c 'addprinter > lptest lptest "lptest" ""' > cmd = addprinter lptest lptest "lptest" "" > result was NT_STATUS_UNSUCCESSFUL > > Running command: rpcclient localhost -N -U'root%secret' -c 'adddriver > "Windows 4.0" > "lptest:ADOBEPS4.DRV:lptest.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:ADFONTS.MFM, > DEFPRTR2.PPD,ICONLIB.DLL"' > cmd = adddriver "Windows 4.0" > "lptest:ADOBEPS4.DRV:lptest.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:ADFONTS.MFM, > DEFPRTR2.PPD,ICONLIB.DLL" > result was NT_STATUS_UNSUCCESSFUL > > # > > Why adddriver doesn' work ? Someone can help me? Thanks in advance. > > PS: I don't use Sources of CUPS drivers / PPDs like ESP PrintPro or I had To > use it absolutely to work it fine > > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba -- --- Daniel T. Gynn RHCE #806200978201621 Essential Systems, Inc. 412-931-5403 ext. 1 fax: 412-931-5425 [EMAIL PROTECTED] GnuPG Key http://www.essensys.com/~dan/gpgring.asc Fingerprint: 1341 3132 FDAC C415 8F5F 03D7 FD4E 166B FA90 58E1 signature.asc Description: This is a digitally signed message part
Re: [Samba] SetPrinter call failed
Ok, I finally figured out what the problem was. In case anyone has the
problem in the future, here is what it was. I had the 'addprinter
command' parameter set to cupsaddsmb (as I read to do somewhere), when I
ran cupsaddsmb by hand, it would fail. Once I took the 'addprinter
command' parameter out, it works great!
On Mon, 2002-10-21 at 15:59, Daniel T. Gynn wrote:
>
> I am having trouble getting the cupsaddsmb script to work to add the
> drivers. Everything seems to work (it copies the drivers to the correct
> directories), but I keep getting the result NT_STATUS_UNSUCCESSFUL error
> message on the rpcclient setdriver command. When trying to connect to
> the printer from a 2K client, I see a client-error-not-found error in
> the log.
>
> I can't seem to find anything in the mailing list logs or the howto
> docs. I have updated to cups 1.1.16 and samba 2.2.6, but that hasn't
> helped any.
>
> My client error line is:
>
> [2002/10/15 16:29:40, 0] printing/print_cups.c:cups_printername_ok(290)
> Unable to get printer status for
> ::{2227a280-3aea-1069-a2de-08002b30309d} - client-error-not-found
> [2002/10/15 16:29:40, 0] smbd/service.c:make_connection(251)
> ees-9905472 (172.24.151.53) couldn't find service
> ::{2227a280-3aea-1069-a2de-08002b30309d}
>
>
> Here is the results of the rpcclient in debug level 3:
>
> Initialising global parameters
> params.c:pm_process() - Processing configuration file
> "/etc/samba/smb.conf"
> Processing section "[global]"
> added interface ip=172.24.150.210 bcast=172.24.151.255
> nmask=255.255.254.0
> resolve_lmhosts: Attempting lmhosts lookup for name localhost<0x20>
> Connecting to host=localhost share=IPC$
> Connecting to 127.0.0.1 at port 445
> error connecting to 127.0.0.1:445 (Connection refused)
> Connecting to 127.0.0.1 at port 139
> lsa_io_sec_qos: length c does not match size 8
> cmd = setdriver business4 business4
> SetPrinter call failed!
> result was NT_STATUS_UNSUCCESSFUL
>
>
> Here is my smb.conf:
>
> [global]
> workgroup = LIMBACH
> netbios name = LFSPITPDC
> server string = LFS Samba Server
> encrypt passwords = Yes
> obey pam restrictions = Yes
> pam password change = Yes
> passwd program = /usr/bin/passwd %u
> passwd chat = *New*password* %n\n *Retype*new*password* %n\n
> *passwd:*all*authentication*tokens*updated*successfully*
> unix password sync = Yes
> log file = /var/log/samba/%m.log
> max log size = 0
> time server = Yes
> socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> printcap name = cups
> addprinter command = /usr/sbin/cupsaddsmb
> domain admin group = ntadmin
> add user script = /usr/local/bin/newMachine.sh %u
> logon path = \\172.24.150.210\profiles\%U
> logon drive = I:
> logon home = \\172.24.150.210\%U
> domain logons = Yes
> os level = 64
> preferred master = Yes
> domain master = Yes
> dns proxy = No
> wins server = 192.168.110.163
> ldap port = 389
> ldap suffix = "ou=smb, o=limbach, c=us"
> ldap admin dn = "uid=manager, o=limbach, c=us"
> ldap ssl = no
> admin users = @ntadmin
> printer admin = @ntadmin
> hosts allow = 172.24.150. 172.24.151. 127.0.0.1 172.29.175.
> 172.24.155. 172.24.154. 172.29.140.
> printing = cups
> print command = /usr/bin/lpr -r -P%p %s
> lpq command = /usr/bin/lpq -P%p
> lprm command = /usr/bin/lprm -P%p %j
>
> [homes]
> comment = Home Directory of %u
> path = /home/%u
> valid users = %S
> read only = No
> create mask = 0664
> directory mask = 0775
>
> [printers]
> comment = All Printers
> path = /var/spool/samba
> printer admin = root @ntadmin
> guest ok = Yes
> printable = Yes
> browseable = No
>
> [public]
> comment = Public Drive
> path = /home/public
> read only = No
> create mask = 0777
> force create mode = 0777
> directory mask = 0777
> force directory mode = 0777
>
> [netlogon]
> path = /usr/local/samba/netlogon
> write list = @ntadmin
>
> [profiles]
> path = /home/ntprofile
> valid users = %U ntadmin
> force user = %U
> read only = No
> create mask = 0600
> directory mask = 0700
>
> [print$]
> path = /usr/l
[Samba] cupsaddsmb rpcclient error
I am running samba 2.2.6 and cups 1.1.16. I can't get cupsaddsmb to complete successfully. I'm at an end here, I can't think of anything else to try after 2 weeks of searching the web. It copies the drivers to the print$ share directory, however the SetPrinter command fails on the rpcclient command and it returns with an NT_STATUS_UNSUCCESSFUL error. At the SetPrinter failure, it returns an WERR_ACCESS_DENIED, but I'm not sure what permissions it's looking for or where it wants them set. I'm attaching the results of rpcclient with debug level 100. PS I'm snipping alot of this since it seems like the list won't let a long list in. You can see the whole log at http://www.essensys.com/~dan/rpcclient.txt Serverzone is 14400 [snip] Initialising global parameters params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf" Processing section "[global]" doing parameter workgroup = LIMBACH doing parameter netbios name = LFSPITPDC handle_netbios_name: set global_myname to: LFSPITPDC doing parameter server string = LFS Samba Server doing parameter encrypt passwords = Yes doing parameter obey pam restrictions = Yes doing parameter pam password change = Yes doing parameter passwd program = /usr/bin/passwd %u doing parameter passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* doing parameter unix password sync = Yes doing parameter log file = /var/log/samba/%m.log doing parameter max log size = 0 doing parameter time server = Yes doing parameter socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 doing parameter addprinter command = /usr/sbin/cupsaddsmb doing parameter domain admin group = ntadmin doing parameter add user script = /usr/local/bin/newMachine.sh %u doing parameter logon path = \\172.24.150.210\profiles\%U doing parameter logon drive = I: doing parameter logon home = \\172.24.150.210\%U doing parameter domain logons = Yes doing parameter os level = 64 doing parameter preferred master = Yes doing parameter domain master = Yes doing parameter dns proxy = No doing parameter wins server = 192.168.110.163 wins_srv_load_list(): Building WINS server list: 192.168.110.163, 1 WINS server listed. doing parameter ldap port = 389 doing parameter ldap suffix = "ou=smb, o=limbach, c=us" doing parameter ldap admin dn = "uid=manager, o=limbach, c=us" doing parameter ldap ssl = no doing parameter admin users = @ntadmin doing parameter printer admin = @ntadmin doing parameter hosts allow = 172.24.150. 172.24.151. 127.0.0.1 172.29.175. 172.24.155. 172.24.154. 172.29.140. doing parameter printcap name = /etc/printcap doing parameter printing = cups doing parameter print command = /usr/bin/lpr -r -P%p %s doing parameter lpq command = /usr/bin/lpq -P%p doing parameter lprm command = /usr/bin/lprm -P%p %j pm_process() returned Yes lp_servicenumber: couldn't find homes set_server_role: ROLE_DOMAIN_PDC codepage_initialise: client code page = 850 load_client_codepage: loading codepage 850. [snip] load_dos_unicode_map: 850 load_unicode_map: loading unicode map for codepage 850. load_unix_unicode_map: ISO8859-1 (init_done=0, override=0) load_unicode_map: loading unicode map for codepage ISO8859-1. added interface ip=172.24.150.210 bcast=172.24.151.255 nmask=255.255.254.0 resolve_lmhosts: Attempting lmhosts lookup for name localhost<0x20> getlmhostsent: lmhost entry: 127.0.0.1 localhost internal_resolve_name: returning 1 addresses: 127.0.0.1 Connecting to host=localhost share=IPC$ Connecting to 127.0.0.1 at port 445 error connecting to 127.0.0.1:445 (Connection refused) Connecting to 127.0.0.1 at port 139 socket option SO_KEEPALIVE = 0 socket option SO_REUSEADDR = 0 socket option SO_BROADCAST = 0 socket option TCP_NODELAY = 1 socket option IPTOS_LOWDELAY = 0 socket option IPTOS_THROUGHPUT = 0 socket option SO_SNDBUF = 16384 socket option SO_RCVBUF = 16384 socket option SO_SNDLOWAT = 1 socket option SO_RCVLOWAT = 1 socket option SO_SNDTIMEO = 0 socket option SO_RCVTIMEO = 0 write_socket(3,72) write_socket(3,72) wrote 72 Sent session request [snip] [000] 04 0B DF 23 F2 0A A6 53 4C 49 4D 42 41 43 48 00 ...#...S LIMBACH. write_socket(3,134) write_socket(3,134) wrote 134 got smb length of 66 [snip] [000] 49 50 43 00 49 50 43 00 IPC.IPC. cli_init_creds: user root domain รจ!@ flgs: 0 ntlmssp_cli_flgs:0 write_socket(3,95) write_socket(3,95) wrote 95 got smb length of 103 [sni] Bind RPC Pipe[731d]: \PIPE\lsarpc Bind Abstract Syntax: [000] 78 57 34 12 34 12 CD AB EF 00 01 23 45 67 89 AB xW4.4... ...#Eg.. [010] 00 00 00 00 Bind Transfer Syntax: [000] 04 5D 88 8A EB 1C C9 11 9F E8 08 00 2B 10 48 60 .].. +.H` [010] 02 00 00 00 00 smb_io_rpc_hdr hdr major : 05 0001 minor : 00 0002 pkt_type : 0b 0003 flags : 03 0004 pack_type0: 10 0005 pack_type1: 00 0006 pack_type2:
[Samba] cupsaddsmb rpcclient error
I am running samba 2.2.6 and cups 1.1.16. I can't get cupsaddsmb to complete successfully. I'm at an end here, I can't think of anything else to try after 2 weeks of searching the web. It copies the drivers to the print$ share directory, however the SetPrinter command fails on the rpcclient command and it returns with an NT_STATUS_UNSUCCESSFUL error. At the SetPrinter failure, it returns an WERR_ACCESS_DENIED, but I'm not sure what permissions it's looking for or where it wants them set. I'm attaching the results of rpcclient with debug level 100. Serverzone is 14400 Adding chars 0x0 0x0 (l->u = False) (u->l = False) Adding chars 0x21 0x0 (l->u = False) (u->l = False) Adding chars 0x23 0x0 (l->u = False) (u->l = False) Adding chars 0x24 0x0 (l->u = False) (u->l = False) Adding chars 0x25 0x0 (l->u = False) (u->l = False) Adding chars 0x26 0x0 (l->u = False) (u->l = False) Adding chars 0x27 0x0 (l->u = False) (u->l = False) Adding chars 0x28 0x0 (l->u = False) (u->l = False) Adding chars 0x29 0x0 (l->u = False) (u->l = False) Adding chars 0x2d 0x0 (l->u = False) (u->l = False) Adding chars 0x2e 0x0 (l->u = False) (u->l = False) Adding chars 0x30 0x0 (l->u = False) (u->l = False) Adding chars 0x31 0x0 (l->u = False) (u->l = False) Adding chars 0x32 0x0 (l->u = False) (u->l = False) Adding chars 0x33 0x0 (l->u = False) (u->l = False) Adding chars 0x34 0x0 (l->u = False) (u->l = False) Adding chars 0x35 0x0 (l->u = False) (u->l = False) Adding chars 0x36 0x0 (l->u = False) (u->l = False) Adding chars 0x37 0x0 (l->u = False) (u->l = False) Adding chars 0x38 0x0 (l->u = False) (u->l = False) Adding chars 0x39 0x0 (l->u = False) (u->l = False) Adding chars 0x40 0x0 (l->u = False) (u->l = False) Adding chars 0x41 0x0 (l->u = False) (u->l = False) Adding chars 0x42 0x0 (l->u = False) (u->l = False) Adding chars 0x43 0x0 (l->u = False) (u->l = False) Adding chars 0x44 0x0 (l->u = False) (u->l = False) Adding chars 0x45 0x0 (l->u = False) (u->l = False) Adding chars 0x46 0x0 (l->u = False) (u->l = False) Adding chars 0x47 0x0 (l->u = False) (u->l = False) Adding chars 0x48 0x0 (l->u = False) (u->l = False) Adding chars 0x49 0x0 (l->u = False) (u->l = False) Adding chars 0x4a 0x0 (l->u = False) (u->l = False) Adding chars 0x4b 0x0 (l->u = False) (u->l = False) Adding chars 0x4c 0x0 (l->u = False) (u->l = False) Adding chars 0x4d 0x0 (l->u = False) (u->l = False) Adding chars 0x4e 0x0 (l->u = False) (u->l = False) Adding chars 0x4f 0x0 (l->u = False) (u->l = False) Adding chars 0x50 0x0 (l->u = False) (u->l = False) Adding chars 0x51 0x0 (l->u = False) (u->l = False) Adding chars 0x52 0x0 (l->u = False) (u->l = False) Adding chars 0x53 0x0 (l->u = False) (u->l = False) Adding chars 0x54 0x0 (l->u = False) (u->l = False) Adding chars 0x55 0x0 (l->u = False) (u->l = False) Adding chars 0x56 0x0 (l->u = False) (u->l = False) Adding chars 0x57 0x0 (l->u = False) (u->l = False) Adding chars 0x58 0x0 (l->u = False) (u->l = False) Adding chars 0x59 0x0 (l->u = False) (u->l = False) Adding chars 0x5a 0x0 (l->u = False) (u->l = False) Adding chars 0x5e 0x0 (l->u = False) (u->l = False) Adding chars 0x5f 0x0 (l->u = False) (u->l = False) Adding chars 0x60 0x0 (l->u = False) (u->l = False) Adding chars 0x61 0x0 (l->u = False) (u->l = False) Adding chars 0x62 0x0 (l->u = False) (u->l = False) Adding chars 0x63 0x0 (l->u = False) (u->l = False) Adding chars 0x64 0x0 (l->u = False) (u->l = False) Adding chars 0x65 0x0 (l->u = False) (u->l = False) Adding chars 0x66 0x0 (l->u = False) (u->l = False) Adding chars 0x67 0x0 (l->u = False) (u->l = False) Adding chars 0x68 0x0 (l->u = False) (u->l = False) Adding chars 0x69 0x0 (l->u = False) (u->l = False) Adding chars 0x6a 0x0 (l->u = False) (u->l = False) Adding chars 0x6b 0x0 (l->u = False) (u->l = False) Adding chars 0x6c 0x0 (l->u = False) (u->l = False) Adding chars 0x6d 0x0 (l->u = False) (u->l = False) Adding chars 0x6e 0x0 (l->u = False) (u->l = False) Adding chars 0x6f 0x0 (l->u = False) (u->l = False) Adding chars 0x70 0x0 (l->u = False) (u->l = False) Adding chars 0x71 0x0 (l->u = False) (u->l = False) Adding chars 0x72 0x0 (l->u = False) (u->l = False) Adding chars 0x73 0x0 (l->u = False) (u->l = False) Adding chars 0x74 0x0 (l->u = False) (u->l = False) Adding chars 0x75 0x0 (l->u = False) (u->l = False) Adding chars 0x76 0x0 (l->u = False) (u->l = False) Adding chars 0x77 0x0 (l->u = False) (u->l = False) Adding chars 0x78 0x0 (l->u = False) (u->l = False) Adding chars 0x79 0x0 (l->u = False) (u->l = False) Adding chars 0x7a 0x0 (l->u = False) (u->l = False) Adding chars 0x7b 0x0 (l->u = False) (u->l = False) Adding chars 0x7d 0x0 (l->u = False) (u->l = False) Adding chars 0x7e 0x0 (l->u = False) (u->l = False) Initialising global parameters params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf" Processing section "[global]" doing parameter workgroup = LIMBACH doing parameter netbios name = LFSPITPDC handle_netbios_name: set global_myname to: L
[Samba] cupsaddsmb rpcclient error
I am running samba 2.2.6 and cups 1.1.16. I can't get cupsaddsmb to complete successfully. I'm at an end here, I can't think of anything else to try after 2 weeks of searching the web. It copies the drivers to the print$ share directory, however the SetPrinter command fails on the rpcclient command and it returns with an NT_STATUS_UNSUCCESSFUL error. At the SetPrinter failure, it returns an WERR_ACCESS_DENIED, but I'm not sure what permissions it's looking for or where it wants them set. I'm attaching the results of rpcclient with debug level 100. Serverzone is 14400 Adding chars 0x0 0x0 (l->u = False) (u->l = False) Adding chars 0x21 0x0 (l->u = False) (u->l = False) Adding chars 0x23 0x0 (l->u = False) (u->l = False) Adding chars 0x24 0x0 (l->u = False) (u->l = False) Adding chars 0x25 0x0 (l->u = False) (u->l = False) Adding chars 0x26 0x0 (l->u = False) (u->l = False) Adding chars 0x27 0x0 (l->u = False) (u->l = False) Adding chars 0x28 0x0 (l->u = False) (u->l = False) Adding chars 0x29 0x0 (l->u = False) (u->l = False) Adding chars 0x2d 0x0 (l->u = False) (u->l = False) Adding chars 0x2e 0x0 (l->u = False) (u->l = False) Adding chars 0x30 0x0 (l->u = False) (u->l = False) Adding chars 0x31 0x0 (l->u = False) (u->l = False) Adding chars 0x32 0x0 (l->u = False) (u->l = False) Adding chars 0x33 0x0 (l->u = False) (u->l = False) Adding chars 0x34 0x0 (l->u = False) (u->l = False) Adding chars 0x35 0x0 (l->u = False) (u->l = False) Adding chars 0x36 0x0 (l->u = False) (u->l = False) Adding chars 0x37 0x0 (l->u = False) (u->l = False) Adding chars 0x38 0x0 (l->u = False) (u->l = False) Adding chars 0x39 0x0 (l->u = False) (u->l = False) Adding chars 0x40 0x0 (l->u = False) (u->l = False) Adding chars 0x41 0x0 (l->u = False) (u->l = False) Adding chars 0x42 0x0 (l->u = False) (u->l = False) Adding chars 0x43 0x0 (l->u = False) (u->l = False) Adding chars 0x44 0x0 (l->u = False) (u->l = False) Adding chars 0x45 0x0 (l->u = False) (u->l = False) Adding chars 0x46 0x0 (l->u = False) (u->l = False) Adding chars 0x47 0x0 (l->u = False) (u->l = False) Adding chars 0x48 0x0 (l->u = False) (u->l = False) Adding chars 0x49 0x0 (l->u = False) (u->l = False) Adding chars 0x4a 0x0 (l->u = False) (u->l = False) Adding chars 0x4b 0x0 (l->u = False) (u->l = False) Adding chars 0x4c 0x0 (l->u = False) (u->l = False) Adding chars 0x4d 0x0 (l->u = False) (u->l = False) Adding chars 0x4e 0x0 (l->u = False) (u->l = False) Adding chars 0x4f 0x0 (l->u = False) (u->l = False) Adding chars 0x50 0x0 (l->u = False) (u->l = False) Adding chars 0x51 0x0 (l->u = False) (u->l = False) Adding chars 0x52 0x0 (l->u = False) (u->l = False) Adding chars 0x53 0x0 (l->u = False) (u->l = False) Adding chars 0x54 0x0 (l->u = False) (u->l = False) Adding chars 0x55 0x0 (l->u = False) (u->l = False) Adding chars 0x56 0x0 (l->u = False) (u->l = False) Adding chars 0x57 0x0 (l->u = False) (u->l = False) Adding chars 0x58 0x0 (l->u = False) (u->l = False) Adding chars 0x59 0x0 (l->u = False) (u->l = False) Adding chars 0x5a 0x0 (l->u = False) (u->l = False) Adding chars 0x5e 0x0 (l->u = False) (u->l = False) Adding chars 0x5f 0x0 (l->u = False) (u->l = False) Adding chars 0x60 0x0 (l->u = False) (u->l = False) Adding chars 0x61 0x0 (l->u = False) (u->l = False) Adding chars 0x62 0x0 (l->u = False) (u->l = False) Adding chars 0x63 0x0 (l->u = False) (u->l = False) Adding chars 0x64 0x0 (l->u = False) (u->l = False) Adding chars 0x65 0x0 (l->u = False) (u->l = False) Adding chars 0x66 0x0 (l->u = False) (u->l = False) Adding chars 0x67 0x0 (l->u = False) (u->l = False) Adding chars 0x68 0x0 (l->u = False) (u->l = False) Adding chars 0x69 0x0 (l->u = False) (u->l = False) Adding chars 0x6a 0x0 (l->u = False) (u->l = False) Adding chars 0x6b 0x0 (l->u = False) (u->l = False) Adding chars 0x6c 0x0 (l->u = False) (u->l = False) Adding chars 0x6d 0x0 (l->u = False) (u->l = False) Adding chars 0x6e 0x0 (l->u = False) (u->l = False) Adding chars 0x6f 0x0 (l->u = False) (u->l = False) Adding chars 0x70 0x0 (l->u = False) (u->l = False) Adding chars 0x71 0x0 (l->u = False) (u->l = False) Adding chars 0x72 0x0 (l->u = False) (u->l = False) Adding chars 0x73 0x0 (l->u = False) (u->l = False) Adding chars 0x74 0x0 (l->u = False) (u->l = False) Adding chars 0x75 0x0 (l->u = False) (u->l = False) Adding chars 0x76 0x0 (l->u = False) (u->l = False) Adding chars 0x77 0x0 (l->u = False) (u->l = False) Adding chars 0x78 0x0 (l->u = False) (u->l = False) Adding chars 0x79 0x0 (l->u = False) (u->l = False) Adding chars 0x7a 0x0 (l->u = False) (u->l = False) Adding chars 0x7b 0x0 (l->u = False) (u->l = False) Adding chars 0x7d 0x0 (l->u = False) (u->l = False) Adding chars 0x7e 0x0 (l->u = False) (u->l = False) Initialising global parameters params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf" Processing section "[global]" doing parameter workgroup = LIMBACH doing parameter netbios name = LFSPITPDC handle_netbios_name: set global_myname to: L
[Samba] cupsaddsmb rpcclient error
_io_pol_hnd printer handle 0018 data1: 001c data2: 0020 data3: 0022 data4: 0024 data5: 00 00 00 00 00 00 00 00 002c status: WERR_OK write_socket(3,45) write_socket(3,45) wrote 45 got smb length of 35 size=35 smb_com=0x4 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=136 smb_flg2=1 smb_tid=1 smb_pid=3162 smb_uid=100 smb_mid=1 smt_wct=0 smb_bcc=0 result was NT_STATUS_UNSUCCESSFUL -- --- Daniel T. Gynn RHCE #806200978201621 Essential Systems, Inc. 412-931-5403 ext. 1 fax: 412-931-5425 [EMAIL PROTECTED] GnuPG Key http://www.essensys.com/~dan/gpgring.asc Fingerprint: 1341 3132 FDAC C415 8F5F 03D7 FD4E 166B FA90 58E1 signature.asc Description: This is a digitally signed message part
Re: [Samba] SetPrinter call failed
I saw something about that before, what would the absolute path be for a
network printer? In anycase, does the rpcclient setdriver command use
that? Plus, the commands work from the command line.
On Mon, 2002-10-21 at 17:17, linux power wrote:
> Have you tried to replace -P %p in the print command
> line in the printer share with the absolute path to
> the printer?
>
>
>
> --- Kurt Pfeifle <[EMAIL PROTECTED]> skrev: >
> > "Daniel T. Gynn wrote on Samba-Digest:
> >
> > > Message: 16
> > > From: "Daniel T. Gynn" <[EMAIL PROTECTED]>
> > > To: [EMAIL PROTECTED]
> > > Date: 21 Oct 2002 15:59:18 -0400
> > > Subject: [Samba] SetPrinter call failed
> > >
> > >
> > > I am having trouble getting the cupsaddsmb script
> > to work to add the
> > > drivers. Everything seems to work (it copies the
> > drivers to the correct
> > > directories), but I keep getting the result
> > NT_STATUS_UNSUCCESSFUL error
> > > message on the rpcclient setdriver command. When
> > trying to connect to
> > > the printer from a 2K client, I see a
> > client-error-not-found error in
> > > the log.
> >
> > Hi Daniel,
> >
> > have you told CUPS to generate a "printcap" by
> > setting
> >
> > "Printcap /etc/printcap"
> >
> > in cupsd.conf?
> >
> > Cheers,
> > Kurt
> >
> >
> > > I can't seem to find anything in the mailing list
> > logs or the howto
> > > docs. I have updated to cups 1.1.16 and samba
> > 2.2.6, but that hasn't
> > > helped any.
> > >
> > > My client error line is:
> > >
> > > [2002/10/15 16:29:40, 0]
> > printing/print_cups.c:cups_printername_ok(290)
> > > Unable to get printer status for
> > > ::{2227a280-3aea-1069-a2de-08002b30309d} -
> > client-error-not-found
> > > [2002/10/15 16:29:40, 0]
> > smbd/service.c:make_connection(251)
> > > ees-9905472 (172.24.151.53) couldn't find
> > service
> > > ::{2227a280-3aea-1069-a2de-08002b30309d}
> > >
> > >
> > > Here is the results of the rpcclient in debug
> > level 3:
> > >
> > > Initialising global parameters
> > > params.c:pm_process() - Processing configuration
> > file
> > > "/etc/samba/smb.conf"
> > > Processing section "[global]"
> > > added interface ip=172.24.150.210
> > bcast=172.24.151.255
> > > nmask=255.255.254.0
> > > resolve_lmhosts: Attempting lmhosts lookup for
> > name localhost<0x20>
> > > Connecting to host=localhost share=IPC$
> > > Connecting to 127.0.0.1 at port 445
> > > error connecting to 127.0.0.1:445 (Connection
> > refused)
> > > Connecting to 127.0.0.1 at port 139
> > > lsa_io_sec_qos: length c does not match size 8
> > > cmd = setdriver business4 business4
> > > SetPrinter call failed!
> > > result was NT_STATUS_UNSUCCESSFUL
> > >
> > >
> > >
> > > Here is my smb.conf:
> > >
> > > [global]
> > > workgroup = LIMBACH
> > > netbios name = LFSPITPDC
> > > server string = LFS Samba Server
> > > encrypt passwords = Yes
> > > obey pam restrictions = Yes
> > > pam password change = Yes
> > > passwd program = /usr/bin/passwd %u
> > > passwd chat = *New*password* %n\n
> > *Retype*new*password* %n\n
> > >
> >
> *passwd:*all*authentication*tokens*updated*successfully*
> > > unix password sync = Yes
> > > log file = /var/log/samba/%m.log
> > > max log size = 0
> > > time server = Yes
> > > socket options = TCP_NODELAY
> > SO_RCVBUF=8192 SO_SNDBUF=8192
> > > printcap name = cups
> > > addprinter command = /usr/sbin/cupsaddsmb
> > > domain admin group = ntadmin
> > > add user script =
> > /usr/local/bin/newMachine.sh %u
> > > logon path = \\172.24.150.210\profiles\%U
> > > logon drive = I:
> > > logon home = \\172.24.150.210\%U
> > > domain logons = Yes
> > > os level = 64
> > > preferred master = Yes
> > > domain master = Yes
> > > dns proxy = No
> > > wins server
Re: [Samba] SetPrinter call failed
Yes, I have
Printcap /etc/printcap
in the cupsd.conf file. And it is generating new printcaps. The
printers are showing up fine in the samba browse list and I can print to
them from the Linux box.
On Mon, 2002-10-21 at 16:48, Kurt Pfeifle wrote:
>
> "Daniel T. Gynn wrote on Samba-Digest:
>
> > Message: 16
> > From: "Daniel T. Gynn" <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Date: 21 Oct 2002 15:59:18 -0400
> > Subject: [Samba] SetPrinter call failed
> >
> >
> > I am having trouble getting the cupsaddsmb script to work to add the
> > drivers. Everything seems to work (it copies the drivers to the correct
> > directories), but I keep getting the result NT_STATUS_UNSUCCESSFUL error
> > message on the rpcclient setdriver command. When trying to connect to
> > the printer from a 2K client, I see a client-error-not-found error in
> > the log.
>
> Hi Daniel,
>
> have you told CUPS to generate a "printcap" by setting
>
> "Printcap /etc/printcap"
>
> in cupsd.conf?
>
> Cheers,
> Kurt
>
>
> > I can't seem to find anything in the mailing list logs or the howto
> > docs. I have updated to cups 1.1.16 and samba 2.2.6, but that hasn't
> > helped any.
> >
> > My client error line is:
> >
> > [2002/10/15 16:29:40, 0] printing/print_cups.c:cups_printername_ok(290)
> > Unable to get printer status for
> > ::{2227a280-3aea-1069-a2de-08002b30309d} - client-error-not-found
> > [2002/10/15 16:29:40, 0] smbd/service.c:make_connection(251)
> > ees-9905472 (172.24.151.53) couldn't find service
> > ::{2227a280-3aea-1069-a2de-08002b30309d}
> >
> >
> > Here is the results of the rpcclient in debug level 3:
> >
> > Initialising global parameters
> > params.c:pm_process() - Processing configuration file
> > "/etc/samba/smb.conf"
> > Processing section "[global]"
> > added interface ip=172.24.150.210 bcast=172.24.151.255
> > nmask=255.255.254.0
> > resolve_lmhosts: Attempting lmhosts lookup for name localhost<0x20>
> > Connecting to host=localhost share=IPC$
> > Connecting to 127.0.0.1 at port 445
> > error connecting to 127.0.0.1:445 (Connection refused)
> > Connecting to 127.0.0.1 at port 139
> > lsa_io_sec_qos: length c does not match size 8
> > cmd = setdriver business4 business4
> > SetPrinter call failed!
> > result was NT_STATUS_UNSUCCESSFUL
> >
> >
> >
> > Here is my smb.conf:
> >
> > [global]
> > workgroup = LIMBACH
> > netbios name = LFSPITPDC
> > server string = LFS Samba Server
> > encrypt passwords = Yes
> > obey pam restrictions = Yes
> > pam password change = Yes
> > passwd program = /usr/bin/passwd %u
> > passwd chat = *New*password* %n\n *Retype*new*password* %n\n
> > *passwd:*all*authentication*tokens*updated*successfully*
> > unix password sync = Yes
> > log file = /var/log/samba/%m.log
> > max log size = 0
> > time server = Yes
> > socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> > printcap name = cups
> > addprinter command = /usr/sbin/cupsaddsmb
> > domain admin group = ntadmin
> > add user script = /usr/local/bin/newMachine.sh %u
> > logon path = \\172.24.150.210\profiles\%U
> > logon drive = I:
> > logon home = \\172.24.150.210\%U
> > domain logons = Yes
> > os level = 64
> > preferred master = Yes
> > domain master = Yes
> > dns proxy = No
> > wins server = 192.168.110.163
> > ldap port = 389
> > ldap suffix = "ou=smb, o=limbach, c=us"
> > ldap admin dn = "uid=manager, o=limbach, c=us"
> > ldap ssl = no
> > admin users = @ntadmin
> > printer admin = @ntadmin
> > hosts allow = 172.24.150. 172.24.151. 127.0.0.1 172.29.175.
> > 172.24.155. 172.24.154. 172.29.140.
> > printing = cups
> > print command = /usr/bin/lpr -r -P%p %s
> > lpq command = /usr/bin/lpq -P%p
> > lprm command = /usr/bin/lprm -P%p %j
> >
> > [homes]
> > comment = Home Directory of %u
> > path = /home/%u
> > valid users = %S
> > read only = No
> > create mask =
