Re: [Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
I'll give you the benefit of the doubt, and assume that the message flood was an accident, and the annoying 'loud' subject line is just ignorance of netiquette. Your question is more appropriate to cups than to Samba. Use smbclient print to send a file to a remote printer. However, the file has to be in a language your printer understands if your sending to a RAW queue. (Postscript should work well if you are sending to a printer queue configured by CUPS with a driver for your printer.) If you have a GUI enviroment with KDE installed, try using kprinter as a frontend to cups. That's the best Linux printing solution I've found for Linux Desktops. Failing that, make sure you read the CUPS documentation, (http://localhost:631) and the printing documents in the Samba howto collection. And lastly, if these two computers are on the same LAN, configure cups on the server to broadcast and accept connections remotely, and let CUPS take care of the network sharing. Again, refer to the CUPS documentation. CUPS's implementation of IPP (Internet Printing Protocol) makes Windoze printer sharing look like a dinossaur left over from the early 80's. (Oh wait... that's about right, isn't it?) On Tue, Feb 17, 2004 at 03:00:28PM +, zynkx wrote: > hi all and thanks in advance for reading this > > i have worked with samba for a while, sharing drives on > my linux boxes and all went well until now. > > now, i tried to share a printer. > > 1 i setup a printer in a box with cups. the printer is > working fine in that host printing everything as it is > told. > > 2 i tried to share the printer to: > 2.1 one windows wrokstation in the lan > 2.2 two linux boxes on the lan > > with the following config file: > [global] >workgroup = PRINTSERVER >netbios name = NEPTUN >server string = neptun print server >log file = /var/log/samba/log.%m >max log size = 50 >security = share >encrypt passwords = yes >socket options = TCP_NODELAY SO_RCVBUF=8192 > SO_SNDBUF=8192 >printcap name = lpstat >printing = cups > [printers] >comment = All Printers >printer = hp_670C >path = /var/spool/samba >browseable = no >guest ok = yes >writable = no >printable = yes >create mode = 0700 >print command = lpr -P %p -o raw %s -r >lpq command = lpstat -o %p >lprm command = cancel %p-%j >use client driver = yes > > i then made the client configuration on the windows > workstation, and windows is printing well to my linux > printing server with samba. it shares drives and the > printer without any kind of problem. > > the problem is that i cannot print form my linux boxes > to that shared printer... > > on linux boxes i made the following > > 1 configured one printer queue with cups linking the > smbspool to /usr/lib/cups/backend/ > > ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb > > 2 loaded the driver for hp 670c in cups > > 3 tried to print a test page and i did it successfully > > now... the only thing is that i am only able to print > test pages... and i can't figure out the command line > options to print from my linux print clients to my > linux print server... > > windows is doing fine though. > > other thing is that when I: > > smbclient //neptun/printers > > i can mount the share but it does not print. > > > > > - > Email Enviado utilizando o servi?o MegaMail > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
Re: [Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
On Tue, 2004-02-17 at 10:00, zynkx wrote: > hi all and thanks in advance for reading this > OKAY, I read it the first 300 times, it wasn't funny then either. -- [EMAIL PROTECTED] REMEMBER ED CURRY! http://www.iwethey.org/ed_curry Novell's Directory Services is a competitive product to Microsoft's Active Directory in much the same way that the Saturn V is a competitive product to those dinky little model rockets that kids light off down at the playfield. -- Thane Walkup signature.asc Description: This is a digitally signed message part -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
[Samba] PRINTING FROM LINUX CLIENTS TO LINUX PRINTER SERVER WITH SAMBA
hi all and thanks in advance for reading this i have worked with samba for a while, sharing drives on my linux boxes and all went well until now. now, i tried to share a printer. 1 i setup a printer in a box with cups. the printer is working fine in that host printing everything as it is told. 2 i tried to share the printer to: 2.1 one windows wrokstation in the lan 2.2 two linux boxes on the lan with the following config file: [global] workgroup = PRINTSERVER netbios name = NEPTUN server string = neptun print server log file = /var/log/samba/log.%m max log size = 50 security = share encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = lpstat printing = cups [printers] comment = All Printers printer = hp_670C path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j use client driver = yes i then made the client configuration on the windows workstation, and windows is printing well to my linux printing server with samba. it shares drives and the printer without any kind of problem. the problem is that i cannot print form my linux boxes to that shared printer... on linux boxes i made the following 1 configured one printer queue with cups linking the smbspool to /usr/lib/cups/backend/ ln -s /usr/bin/smbspool /usr/lib/cups/backend/smb 2 loaded the driver for hp 670c in cups 3 tried to print a test page and i did it successfully now... the only thing is that i am only able to print test pages... and i can't figure out the command line options to print from my linux print clients to my linux print server... windows is doing fine though. other thing is that when I: smbclient //neptun/printers i can mount the share but it does not print. - Email Enviado utilizando o serviço MegaMail -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
