You need to use the wb_group squid external_acl helper.
Check the Squid FAQ and Squid message archives for details.
Jay
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
Ian Clancy
Sent: Wednesday, 30 July 2003 8:19 PM
To: '[EMAIL PROTECTED]'
Subject: [Samba] Using Winbind with Squid
Hello,
I've configured a squid proxy server to use the wb_auth module to
authenticate NT Users . I'm aware that this is not the squid users mailing
list but since the wb_auth modle uses the winbind application i
thought this
might be a good place to look for some help.
Basically, the wb_auth module asks winbind to authenticate a
users. Winbind
then returns a '0' if the authentication was successful, or a '1' if the
authentication was unsuccessful. This is working perfectly except for one
problem. I want to be able to authenticate only specified users or groups.
At the moment every domain user is able to use the proxy server.
Can anyone
think of a way to get winbind to only authenticate members of an 'Internet
Users' group ?.
Has anyone any previous experience of the setup ?
All help much appreciated.
Ian
Legal Disclaimer: Any views expressed by the sender of this message are
not necessarily those of Connaught Electronics Ltd. Information in this
e-mail may be confidential and is for the use of the intended recipient
only, no mistake in transmission is intended to waive or compromise such
privilege. Please advise the sender if you receive this e-mail by mistake.
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
