[sane-devel] Fujitsu fi-4120Cdj errors (repeat)
set_WD_paper_width_X/Y spezifies the size of your sheet of paper. You also have to define the scan area (option -x -y). The height of your scan area is 0x24e8/1200 inch = 20cm (see window descriptor block). Oliver Am Mit, 2003-03-26 um 15.34 schrieb m. allan noah: > update: i hard-set the gamma byte (0x29) to 0x80, and the paper byte > (0x35) to 0xC0, and then forced the lines: > > set_WD_paper_width_X (buffer, s->page_width); > set_WD_paper_length_Y (buffer, s->page_height); > > to always run, and the scanner runs. > > but now, the output images from the program 'scanadf' are truncated. > > any ideas? > > allan > > On Wed, 26 Mar 2003, m. allan noah wrote: > > > just got a Fujitsu fi-4120C scanner. was previously using an M3091DCd. i > > am running latest cvs snapshot. i use the scsi port, not usb. i get the > > following error: > > > > [fujitsu] Window set > > [fujitsu] 000: 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 00 00 > > [fujitsu] 016: 25 00 00 00 24 e8 00 80 00 00 01 00 00 00 00 00 > > [fujitsu] 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 > > [fujitsu] 048: 20 00 00 00 00 84 00 00 00 00 00 00 00 00 00 00 > > [fujitsu] > [fujitsu] 000: 24 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 > > [fujitsu] 016: 00 40 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 > > [fujitsu] 032: 00 00 25 00 00 00 24 e8 00 80 00 00 01 00 00 00 > > [fujitsu] 048: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > [fujitsu] 064: 00 a0 20 00 00 00 00 84 00 00 00 00 00 00 00 00 > > [fujitsu] 080: 00 00 > > [fujitsu] 5/38/0: Invalid field in parm list > > [fujitsu] offending byte is 49. (Byte 41 in window descriptor block) > > [fujitsu] sanei_scsi_cmd: returning 0x0004 > > [fujitsu] sanei_scsi_cmd: returning 0 bytes: > > [fujitsu] sane_start: ERROR: failed to set window > > > > from the command line: > > > > SANE_DEBUG_FUJITSU=128 SANE_DEBUG_SANEI_SCSI=0 scanadf -d fujitsu --mode > > Lineart -x 200 -y 200 > > > > byte 41 (0x29) is gamma/pattern according to fujitsu-scsi.h > > > > i have tried hard-setting this to all the possible (and some un-listed) > > options, no change. i have tried different modes, no change. > > > > what is this option for (is is gamma correct or a pattern?) and what > > should it be for lineart? > > > > how easy is it to get programming docs from fujitsu, since the 4120 seems > > to need some help? > > > > allan > > > > > > -- > "so don't tell us it can't be done, putting down what you don't know. > money isn't our god, integrity will free our souls" - Max Cavalera > > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > >
[sane-devel] Fujitsu fi-4120Cdj errors (repeat)
update: i hard-set the gamma byte (0x29) to 0x80, and the paper byte (0x35) to 0xC0, and then forced the lines: set_WD_paper_width_X (buffer, s->page_width); set_WD_paper_length_Y (buffer, s->page_height); to always run, and the scanner runs. but now, the output images from the program 'scanadf' are truncated. any ideas? allan On Wed, 26 Mar 2003, m. allan noah wrote: > just got a Fujitsu fi-4120C scanner. was previously using an M3091DCd. i > am running latest cvs snapshot. i use the scsi port, not usb. i get the > following error: > > [fujitsu] Window set > [fujitsu] 000: 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 00 00 > [fujitsu] 016: 25 00 00 00 24 e8 00 80 00 00 01 00 00 00 00 00 > [fujitsu] 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 > [fujitsu] 048: 20 00 00 00 00 84 00 00 00 00 00 00 00 00 00 00 > [fujitsu] [fujitsu] 000: 24 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 > [fujitsu] 016: 00 40 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 > [fujitsu] 032: 00 00 25 00 00 00 24 e8 00 80 00 00 01 00 00 00 > [fujitsu] 048: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [fujitsu] 064: 00 a0 20 00 00 00 00 84 00 00 00 00 00 00 00 00 > [fujitsu] 080: 00 00 > [fujitsu] 5/38/0: Invalid field in parm list > [fujitsu] offending byte is 49. (Byte 41 in window descriptor block) > [fujitsu] sanei_scsi_cmd: returning 0x0004 > [fujitsu] sanei_scsi_cmd: returning 0 bytes: > [fujitsu] sane_start: ERROR: failed to set window > > from the command line: > > SANE_DEBUG_FUJITSU=128 SANE_DEBUG_SANEI_SCSI=0 scanadf -d fujitsu --mode > Lineart -x 200 -y 200 > > byte 41 (0x29) is gamma/pattern according to fujitsu-scsi.h > > i have tried hard-setting this to all the possible (and some un-listed) > options, no change. i have tried different modes, no change. > > what is this option for (is is gamma correct or a pattern?) and what > should it be for lineart? > > how easy is it to get programming docs from fujitsu, since the 4120 seems > to need some help? > > allan > > -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera
[sane-devel] Fujitsu fi-4120Cdj errors (repeat)
i am sending this again, cause my list membership was wrong, sorry if it double posts... just got a Fujitsu fi-4120C scanner. was previously using an M3091DCd. i am running latest cvs snapshot. i use the scsi port, not usb. i get the following error: [fujitsu] Window set [fujitsu] 000: 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 00 00 [fujitsu] 016: 25 00 00 00 24 e8 00 80 00 00 01 00 00 00 00 00 [fujitsu] 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 [fujitsu] 048: 20 00 00 00 00 84 00 00 00 00 00 00 00 00 00 00 [fujitsu]