[sane-devel] Scanner DocketPORT 468
Hi, I'm trying to get to work scanner DocketPORT 468. I already know it is not supported and I have found no discussions related, however I'm giving it a try as the genesys backend provides support for scanners based on the Genesys Logic GL646 and GL841 chips and I have read in a discussion that GL842 is essentially the same as the GL841. My OS is: Linux version 2.6.35-28-generic (buildd at rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) I have (sane-backends) 1.0.21; backend version 1.0.21. When connecting the scanner I get: :dmesg [ 3960.456090] usb 2-5: new high speed USB device using ehci_hcd and address 9 :sane-find-scanner -v found USB scanner (vendor=0x1dcc [Document Capture Technologies Inc.], product=0x4817 [SimpleScan], chip=GL842) at libusb:002:008 :scanimage -V scanimage (sane-backends) 1.0.21; backend version 1.0.21 But: scanimage -L No scanners were identified. Any suggestions? Should I just forget about it and look for another scanner? :) Thanks and regards Enma :) -- next part -- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110526/07caff3e/attachment.html
[sane-devel] Scanner DocketPORT 468
The scanner should probably work since the backend says it works with the Visioneer XP100r3/RoadWarrior/Xerox Travel Scanner, which I believe are rebadged versions of the same model. From: sane-devel-bounces+delm=bulletscan@lists.alioth.debian.org [mailto:sane-devel-bounces+delm=bulletscan.com at lists.alioth.debian.org] On Behalf Of Enma Ai Sent: Thursday, May 26, 2011 4:44 AM To: sane-devel at lists.alioth.debian.org Subject: [sane-devel] Scanner DocketPORT 468 Hi, I'm trying to get to work scanner DocketPORT 468. I already know it is not supported and I have found no discussions related, however I'm giving it a try as the genesys backend provides support for scanners based on the Genesys Logic GL646 and GL841 chips and I have read in a discussion that GL842 is essentially the same as the GL841. My OS is: Linux version 2.6.35-28-generic (buildd at rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) I have (sane-backends) 1.0.21; backend version 1.0.21. When connecting the scanner I get: :dmesg [ 3960.456090] usb 2-5: new high speed USB device using ehci_hcd and address 9 :sane-find-scanner -v found USB scanner (vendor=0x1dcc [Document Capture Technologies Inc.], product=0x4817 [SimpleScan], chip=GL842) at libusb:002:008 :scanimage -V scanimage (sane-backends) 1.0.21; backend version 1.0.21 But: scanimage -L No scanners were identified. Any suggestions? Should I just forget about it and look for another scanner? :) Thanks and regards Enma :) -- next part -- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110526/cf22049c/attachment.html
[sane-devel] Scanner DocketPORT 468
Hi, I have followed the indications from this site to recompile the backends: https://help.ubuntu.com/community/CheckIfScannerIsClone sane-find-scanner -v -v (To identify Id of the vendor, product and chipset) device descriptor of 0x1dcc/0x4817 at 002:004 (Document Capture Technologies Inc. SimpleScan) bLength 18 bDescriptorType 1 bcdUSB2.00 bDeviceClass 255 bDeviceSubClass 255 bDeviceProtocol 255 bMaxPacketSize0 64 *idVendor 0x1DCC idProduct 0x4817* bcdDevice 3.02 *iManufacturer 10 (Document Capture Technologies Inc.) iProduct 11 (SimpleScan)* ... trying to find out which USB chip is used checking for GL84x ... This USB chip looks like a *GL842* (result from sane-backends 1.0.21) found USB scanner (vendor=0x1dcc [Document Capture Technologies Inc.], product=0x4817 [SimpleScan], chip=GL842) at libusb:002:004 With the above information I found several possible compatible scanners with chip GL841, even though this scanner has GL842 and it is not supported. /* GL841 devices */ {0x04a7, 0x0474, visioneer_xp300_model}, {0x04a7, 0x0494, visioneer_roadwarrior_model}, {0x04a7, 0x049b, visioneer_xp100_r3_model}, {0x04a7, 0x04ac, xerox_travelscanner_model}, {0x04a9, 0x2213, canon_lide_50_model}, {0x04a9, 0x221c, canon_lide_60_model}, {0x07b3, 0x0900, plustek_3600_model}, {0x0a17, 0x3210, pentax_dsmobile_600_model}, {0x04f9, 0x2038, pentax_dsmobile_600_model}, /* clone, only usb id is different */ {0x0a82, 0x4800, syscan_docketport_485_model}, {0x0a82, 0x4802, syscan_docketport_465_model}, {0x0a82, 0x4803, syscan_docketport_665_model}, {0x0a82, 0x480c, syscan_docketport_685_model}, {0x1dcc, 0x4810, dct_docketport_487_model}, {0x1dcc, 0x4812, syscan_docketport_467_model}, I have tried with all the docketport and the scanner is recognized only by those with the same vendor id 0x1dcc: //Different vendor id (for example 0x0a82, 0x4802, syscan_docketport_465_model) scanimage -L No scanners were identified. //Same vendor id: 0x1dcc scanimage -L device `genesys:libusb:002:007' is a DCT DocketPORT 487 flatbed scanner But I get a warning and the scanner finally crashes: scanimage image.pnm [genesys] WARNING: Your scanner is not fully supported or at least [genesys] had only limited testing. Please be careful and [genesys] report any failure/success to [genesys] sane-devel at lists.alioth.debian.org. Please provide as many [genesys] details as possible, e.g. the exact name of your [genesys] scanner and what does (not) work. ... Only Docketport 467 worked and it got to scan, however the image was completely black and when I tried to scan again the scanner wasn't recognized any longer. I will do some more tests with this model and I have also contact the manufacturer just in case they have a linux driver available. If I finally get it to scan I will post it. Thanks for your help! :) On 26 May 2011 17:07, Daniel Elm delm at bulletscan.com wrote: The scanner should probably work since the backend says it works with the Visioneer XP100r3/RoadWarrior/Xerox Travel Scanner, which I believe are rebadged versions of the same model. *From:* sane-devel-bounces+delm=bulletscan.com at lists.alioth.debian.org[mailto: sane-devel-bounces+delm=bulletscan.com at lists.alioth.debian.org] *On Behalf Of *Enma Ai *Sent:* Thursday, May 26, 2011 4:44 AM *To:* sane-devel at lists.alioth.debian.org *Subject:* [sane-devel] Scanner DocketPORT 468 Hi, I'm trying to get to work scanner DocketPORT 468. I already know it is not supported and I have found no discussions related, however I'm giving it a try as the genesys backend provides support for scanners based on the Genesys Logic GL646 and GL841 chips and I have read in a discussion that GL842 is essentially the same as the GL841. My OS is: Linux version 2.6.35-28-generic (buildd at rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) I have (sane-backends) 1.0.21; backend version 1.0.21. When connecting the scanner I get: :dmesg [ 3960.456090] usb 2-5: new high speed USB device using ehci_hcd and address 9 :sane-find-scanner -v found USB scanner (vendor=0x1dcc [Document Capture Technologies Inc.], product=0x4817 [SimpleScan], chip=GL842) at libusb:002:008 :scanimage -V scanimage (sane-backends) 1.0.21; backend version 1.0.21 But: scanimage -L No scanners were identified. Any suggestions? Should I just forget about it and look for another scanner? :) Thanks and regards Enma :) -- * La Ni?a Ninja * -- next part -- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110526/c1ecd7c5/attachment.html
[sane-devel] Scanner DocketPORT 468
Le jeudi 26 mai 2011 18:06:32 Enma Ai, vous avez ?crit : Hi, I have followed the indications from this site to recompile the backends: https://help.ubuntu.com/community/CheckIfScannerIsClone sane-find-scanner -v -v (To identify Id of the vendor, product and chipset) device descriptor of 0x1dcc/0x4817 at 002:004 (Document Capture Technologies Inc. SimpleScan) bLength 18 bDescriptorType 1 bcdUSB2.00 bDeviceClass 255 bDeviceSubClass 255 bDeviceProtocol 255 bMaxPacketSize0 64 *idVendor 0x1DCC idProduct 0x4817* bcdDevice 3.02 *iManufacturer 10 (Document Capture Technologies Inc.) iProduct 11 (SimpleScan)* ... trying to find out which USB chip is used checking for GL84x ... This USB chip looks like a *GL842* (result from sane-backends 1.0.21) found USB scanner (vendor=0x1dcc [Document Capture Technologies Inc.], product=0x4817 [SimpleScan], chip=GL842) at libusb:002:004 With the above information I found several possible compatible scanners with chip GL841, even though this scanner has GL842 and it is not supported. /* GL841 devices */ {0x04a7, 0x0474, visioneer_xp300_model}, {0x04a7, 0x0494, visioneer_roadwarrior_model}, {0x04a7, 0x049b, visioneer_xp100_r3_model}, {0x04a7, 0x04ac, xerox_travelscanner_model}, {0x04a9, 0x2213, canon_lide_50_model}, {0x04a9, 0x221c, canon_lide_60_model}, {0x07b3, 0x0900, plustek_3600_model}, {0x0a17, 0x3210, pentax_dsmobile_600_model}, {0x04f9, 0x2038, pentax_dsmobile_600_model}, /* clone, only usb id is different */ {0x0a82, 0x4800, syscan_docketport_485_model}, {0x0a82, 0x4802, syscan_docketport_465_model}, {0x0a82, 0x4803, syscan_docketport_665_model}, {0x0a82, 0x480c, syscan_docketport_685_model}, {0x1dcc, 0x4810, dct_docketport_487_model}, {0x1dcc, 0x4812, syscan_docketport_467_model}, I have tried with all the docketport and the scanner is recognized only by those with the same vendor id 0x1dcc: //Different vendor id (for example 0x0a82, 0x4802, syscan_docketport_465_model) scanimage -L No scanners were identified. //Same vendor id: 0x1dcc scanimage -L device `genesys:libusb:002:007' is a DCT DocketPORT 487 flatbed scanner But I get a warning and the scanner finally crashes: scanimage image.pnm [genesys] WARNING: Your scanner is not fully supported or at least [genesys] had only limited testing. Please be careful and [genesys] report any failure/success to [genesys] sane-devel at lists.alioth.debian.org. Please provide as many [genesys] details as possible, e.g. the exact name of your [genesys] scanner and what does (not) work. ... Only Docketport 467 worked and it got to scan, however the image was completely black and when I tried to scan again the scanner wasn't recognized any longer. I will do some more tests with this model and I have also contact the manufacturer just in case they have a linux driver available. If I finally get it to scan I will post it. Thanks for your help! :) On 26 May 2011 17:07, Daniel Elm delm at bulletscan.com wrote: The scanner should probably work since the backend says it works with the Visioneer XP100r3/RoadWarrior/Xerox Travel Scanner, which I believe are rebadged versions of the same model. *From:* sane-devel-bounces+delm=bulletscan.com at lists.alioth.debian.org[mailto: sane-devel-bounces+delm=bulletscan.com at lists.alioth.debian.org] *On Behalf Of *Enma Ai *Sent:* Thursday, May 26, 2011 4:44 AM *To:* sane-devel at lists.alioth.debian.org *Subject:* [sane-devel] Scanner DocketPORT 468 Hi, I'm trying to get to work scanner DocketPORT 468. I already know it is not supported and I have found no discussions related, however I'm giving it a try as the genesys backend provides support for scanners based on the Genesys Logic GL646 and GL841 chips and I have read in a discussion that GL842 is essentially the same as the GL841. My OS is: Linux version 2.6.35-28-generic (buildd at rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) I have (sane-backends) 1.0.21; backend version 1.0.21. When connecting the scanner I get: :dmesg [ 3960.456090] usb 2-5: new high speed USB device using ehci_hcd and address 9 :sane-find-scanner -v found USB scanner (vendor=0x1dcc [Document Capture Technologies Inc.], product=0x4817 [SimpleScan], chip=GL842) at libusb:002:008 :scanimage -V scanimage (sane-backends) 1.0.21; backend version 1.0.21 But: scanimage -L No scanners were identified. Any suggestions? Should I just forget about it and look for another scanner? :) Thanks and regards Enma :) Hello, in fact most of the scanners supported