Re: CSNanoparticles quadruple life of brain cells
Thanks for this link. However, on my browser, the print is illegible, maybe 1 point type. I have no trouble at other sites. Is it necessary to join this group in order to get full-sized typeface? Or is there some other problem? I would like to read this but can not. JBB Biophysica wrote: Here is a recent article relevant for our interest in Silver Oxide particles and metallic silver particles. A molecular biologist and a nanoscientist at the University of Central Florida have found that nanomaterials developed for industry have an unexpected and potentially revolutionary side effect: They can triple or quadruple the life of brain cells at http://news.nanoapex.com/modules.php?name=Newsfile=articlesid=3709 John (Biophysica.com) -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
CSNanoparticles quadruple life of brain cells
Here is a recent article relevant for our interest in Silver Oxide particles and metallic silver particles. A molecular biologist and a nanoscientist at the University of Central Florida have found that nanomaterials developed for industry have an unexpected and potentially revolutionary side effect: They can triple or quadruple the life of brain cells at http://news.nanoapex.com/modules.php?name=Newsfile=articlesid=3709 John (Biophysica.com)
Re: CSInnovative Natural Products Analysis
Dear Frank and Bob, I want to thank you both for testing the Innovative products I sent to you. This boggles my mind that they're mislabeling their products and I plan to do something about it. Frank, I want to sincerely thank you for testing this product for me, and for all the people on this list to see. It was so very kind of you (and informative). Thanks to all, Maryanne - Original Message - From: Robert Berger bober...@swbell.net To: silver-list@eskimo.com Sent: Wednesday, August 13, 2003 9:38 PM Subject: Re: CSInnovative Natural Products Analysis Hi EIS'ers, Like Frank I received a sample of Innovative Natral Prodycts 1100 ppm colloidal silver. One characterisitic of high ppm silver compounds is that it has an orange color to it that will stain papr or cloth. When a CS or EIS product has color it will not stain as the color that one sees is due to the particles adsorbing part of the white light spectrum. This material check out at 1700+ ppm using my spectrophotometer. My personal opinion would be to avoid anything that is a compound. Ole Bob Frank Key wrote: Innovative Natural Products 500 ppm colloidal silver was submitted for analysis by a list member. The bottle identifies the product as being colloidal silver with no mention that it is silver protein. When the bottle is shaken it foams and the foam persists for several minutes indicating that something other than silver and water is present. This is typical of silver protein products. Laboratory analysis indicates the product is a generic silver protein. The total silver concentration was measured to be 603 ppm. The silver particles are suspended in an aqueous animal protein solution (gelatin). For more details including the particle size distribution plot and the FT-IR spectra plot see: http://www.silver-colloids.com/Reports/cpr13/ frank key - Colloidal Science Lab. Inc. -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
CSFw: layman's LED device
- Original Message - From: Acmeair To: Acmeair Sent: Thursday, August 14, 2003 11:36 AM Subject: layman's LED device Re: CSOT:ASSEMBLY INSTR. FOR LAYMAN'S LED DEVICEcontinued Part#2 a.. From: Brooks Bradley (view other messages by this author) b.. Date: Sun, 13 Jul 2003 19:22:11 Mr. Bradley,I finally finished the soldering and placement of the resistor, switch, and battery pack. Was quite surprised at the amount of dimming accomplished by the resistor over a full 3 volts from the battery pack. Am getting 1.55 volts to the finished system. I will deliver this unit to my son this weekend, for treatment of his carpal tunnel syndrome. I've been using the device on my left hip socket, that has been aching a little after sleeping on my side. I did two 5-minute doses,and noticed quite an improvement. This morning was the fourth day of use, and I will say that I can sleep thru the night, and not have any pains in the hip socket. I hope that this LED array is as effective on the carpal tunnel syndrome. Will post the results after a week or two of use. Is a five minute exposure, twice a day, adequate? Thanks again, Mr. Bradley. Your help is extremely appreciated. Jim Dear Jim, The placement is not critical. However, the preferred placement is, usually, with about 1/2 of the bulb extending above the reference surface. I apologize for not addressing this portion of your inquiry...in my earlier response. Sincerely, Brooks Bradley. Acmeair wrote: Mr. Bradley, I'm going to assemble this board with out the solderless connectors. How much of the LED bulb should I allow to stick out from the face of the board for maximum light penetration. 1/2, 1/4, flush, or what? Any advice? thanks,Jim
Re: CSLupus
Ambrotose from Mannatech, or if you have the energy to make your own, call it glyconutrient jam... ...tends to stop autoimmunes by virtue of supplying needed, possibly deficient, messenger sugars so the body can then sort out the crossed wires. Things to look up are eight essential sugars or just go to the science site: http://glycoinformation.com/ http://glycoscience.com/glycoscience/home.wm Don't laugh just yet, like I did at first; a few doctors and several nurses are seeing phenomenal improvement in autoimmunes, locally to where I live. And the scientific data appears to be bulletproof. Duncan Crow (became a distributor) Hi Marshall there was a guy on the rife list who cured himself of lupus using a rife machine..It took 7 months here's what he had to say... hello I had lupus yes had I went on treatments for 7 months and it is gone I used an EMT rife machine its fairly inexpensive .It works I will give you some freqencies that I have used 328.772 (lupus)You also have to boost the immune system since this is an auto immune disease. I work on all my symptems to what symptems dos she have? Let me know if you need any more info . God bless Marshall Dudley wrote: Lupus is considered an autoimmune disease. Although CS may be effective in preventing it by killing pathogens that may trigger the body to generate antibiotics that attack the body, there is some doubt that it would cure it once it occurs, although it may help prevent it's advance. I have wondered if CMO would help lupus, but have never heard of anyone trying it. Marshall mamapug wrote: Hi, Guys, Anyone know anything about Lupus?? I`m wondering if that is what I have... (Apparently the heart thing was caused by the medication I took, Bextra.) Marshalee -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFw: layman's LED device
Dear Jim, One thing I failed to relate in my original postings was that one can use the full 3 volt potential on the assembly. The only proviso is that the life of the LED's is shortened considerably. An acceptable trade=off, in my eyesespecially in light of the increased light intensity. Additionally, the results are greatly acceleratedor at least that has been our experience. This was most pronounced in our later carpel tunnel evaluations. Sincerely, Brooks Bradley. Acmeair wrote: - Original Message - From: Acmeair mailto:res00...@gte.net To: Acmeair mailto:res00...@gte.net Sent: Thursday, August 14, 2003 11:36 AM Subject: layman's LED device Re: CSOT:ASSEMBLY INSTR. FOR LAYMAN'S LED DEVICEcontinued Part#2 * From: Brooks Bradley (view other messages by this author http://escribe.com/health/thesilverlist/index.html?by=Authora=Brooks%20Bradley) * Date: Sun, 13 Jul 2003 19:22:11 Mr. Bradley, I finally finished the soldering and placement of the resistor, switch, and battery pack. Was quite surprised at the amount of dimming accomplished by the resistor over a full 3 volts from the battery pack. Am getting 1.55 volts to the finished system. I will deliver this unit to my son this weekend, for treatment of his carpal tunnel syndrome. I've been using the device on my left hip socket, that has been aching a little after sleeping on my side. I did two 5-minute doses,and noticed quite an improvement. This morning was the fourth day of use, and I will say that I can sleep thru the night, and not have any pains in the hip socket. I hope that this LED array is as effective on the carpal tunnel syndrome. Will post the results after a week or two of use. Is a five minute exposure, twice a day, adequate? Thanks again, Mr. Bradley. Your help is extremely appreciated. Jim Dear Jim, The placement is not critical. However, the preferred placement is, usually, with about 1/2 of the bulb extending above the reference surface. I apologize for not addressing this portion of your inquiry...in my earlier response. Sincerely, Brooks Bradley. Acmeair wrote: Mr. Bradley, I'm going to assemble this board with out the solderless connectors. How much of the LED bulb should I allow to stick out from the face of the board for maximum light penetration. 1/2, 1/4, flush, or what? Any advice? thanks,Jim -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSNanoparticles quadruple life of brain cells
If you're using internet explorer, you can increase/decrease the print by selecting viewtext sizelarger etc. I recall Opera had similar opportunities also. It pays to explore beyond the basics of your software. Chuck Whose cruel idea was it for the word Lisp to have S in it? On Thu, 14 Aug 2003 12:06:25 +0900, Jonathan B. Britten jbrit...@cc.nakamura-u.ac.jp wrote: Thanks for this link. However, on my browser, the print is illegible, maybe 1 point type. I have no trouble at other sites. Is it necessary to join this group in order to get full-sized typeface? Or is there some other problem? I would like to read this but can not. JBB -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSNanoparticles quadruple life of brain cells
I have come in late on this, Try holding down the Ctrl key and run your mouse wheel up and down. Sincerely Yours, http://hdka.stormpages.com/indexf.html http://www.babelmagazine.com/wing.html http://members.myecom.net/hdka/ct/ct.html Just because you don't take an interest in politics and government, doesn't mean that politics and government isn't taking an interest in YOU. - Original Message - From: cking...@nycap.rr.com To: silver-list@eskimo.com Sent: Thursday, August 14, 2003 10:28 PM Subject: Re: CSNanoparticles quadruple life of brain cells If you're using internet explorer, you can increase/decrease the print by selecting viewtext sizelarger etc. I recall Opera had similar opportunities also. It pays to explore beyond the basics of your software. Chuck Whose cruel idea was it for the word Lisp to have S in it? On Thu, 14 Aug 2003 12:06:25 +0900, Jonathan B. Britten jbrit...@cc.nakamura-u.ac.jp wrote: Thanks for this link. However, on my browser, the print is illegible, maybe 1 point type. I have no trouble at other sites. Is it necessary to join this group in order to get full-sized typeface? Or is there some other problem? I would like to read this but can not. JBB -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.509 / Virus Database: 306 - Release Date: 8/12/03
Re: CSFw: layman's LED device
Mr. Bradley, thanks for the update. I'll now order the LED's and also the solderless connectors, and build another, to give to the kid. I'd like to have a unit here, just for small aches and pains, etc. but won't care about the light intensity. Do you think, maybe, an 1/2 k resistor would provide enough light source, or should I leave the resistor out of the loop? What would the best sequence be, with the full 3 volt unit, 3 min., or 5 min, and how many times a day. just don't want to over treat. Thanks once again, Mr. Bradley, Jim - Original Message - From: Brooks Bradley brooks.brad...@att.net To: silver-list@eskimo.com Sent: Thursday, August 14, 2003 2:58 PM Subject: Re: CSFw: layman's LED device Dear Jim, One thing I failed to relate in my original postings was that one can use the full 3 volt potential on the assembly. The only proviso is that the life of the LED's is shortened considerably. An acceptable trade=off, in my eyesespecially in light of the increased light intensity. Additionally, the results are greatly acceleratedor at least that has been our experience. This was most pronounced in our later carpel tunnel evaluations. Sincerely, Brooks Bradley. Acmeair wrote: - Original Message - From: Acmeair mailto:res00...@gte.net To: Acmeair mailto:res00...@gte.net Sent: Thursday, August 14, 2003 11:36 AM Subject: layman's LED device Re: CSOT:ASSEMBLY INSTR. FOR LAYMAN'S LED DEVICEcontinued Part#2 * From: Brooks Bradley (view other messages by this author http://escribe.com/health/thesilverlist/index.html?by=Authora=Brooks%20Bra dley) * Date: Sun, 13 Jul 2003 19:22:11 Mr. Bradley, I finally finished the soldering and placement of the resistor, switch, and battery pack. Was quite surprised at the amount of dimming accomplished by the resistor over a full 3 volts from the battery pack. Am getting 1.55 volts to the finished system. I will deliver this unit to my son this weekend, for treatment of his carpal tunnel syndrome. I've been using the device on my left hip socket, that has been aching a little after sleeping on my side. I did two 5-minute doses,and noticed quite an improvement. This morning was the fourth day of use, and I will say that I can sleep thru the night, and not have any pains in the hip socket. I hope that this LED array is as effective on the carpal tunnel syndrome. Will post the results after a week or two of use. Is a five minute exposure, twice a day, adequate? Thanks again, Mr. Bradley. Your help is extremely appreciated. Jim Dear Jim, The placement is not critical. However, the preferred placement is, usually, with about 1/2 of the bulb extending above the reference surface. I apologize for not addressing this portion of your inquiry...in my earlier response. Sincerely, Brooks Bradley. Acmeair wrote: Mr. Bradley, I'm going to assemble this board with out the solderless connectors. How much of the LED bulb should I allow to stick out from the face of the board for maximum light penetration. 1/2, 1/4, flush, or what? Any advice? thanks,Jim -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSSilverGen specs
Okay, so Mike M doesn't like Trem's generator because Mike is a perfectionist. So rather than chastise Mike, let's give him a chance. Here is my proposition: Mike, design the ideal CS generator. Of course this wouldn't be a battery and a resistor. Something like an MCU. You can get them with LCD drivers, IO ports, AD converters and whatever. Put together the perfect CS generator for let's say under 200 bucks. Here is the catch. All of the parts have to be priced in quantities of 5K or less. That shouldn't be too much of a problem the way the economy is. Also include your time and other labor. Say 50 bucks an hour for PCB layout and MCU programming. 20 bucks an hour if you farm it out to India (^_^). Don't forget the contract manufacturer that buys all of the parts, manufactures the PCB and solders them together. Be as honest as you can and then figure in your overhead. And for gods sake, don't use flat strips of silver! Run the math Andy (^_^) From: CKing001 My motto is: Always be sincere whether you mean it or not. Dan
