Thanks you Neville, that is fascinating.
My current method (HVAC cone) uses four feet of silver wire coiled in the
bottom of the brew chamber (which is already a lot of surface area), but now
you've got me thinking about adding a third electrode at the surface of the
solution. I'm thinking that might give me a similar improvement in brewing time.
Cheers,
indi
On Fri, Dec 05, 2008 at 03:11:49PM +1030, Neville wrote:
Just to conclude my little 'play around' with a 4 electrode generator
indi, I offer the following.
1100ml and 1 1/2 hour production time.
Pure water only, (no seed), approximately 20ppm before stabilisation,
(result dependant on temperature of course).
Distilled water 1 litre, (no seed), 1 hour production time approximately
16ppm, (again dependant on temperature).
Solution totally clear.
During stabilisation time frame solution darkens to very deep golden
colour, (as expected and anticipated).
I have deduced from this that I now have the best of both worlds. While
using a normal generator for the production of my daily intake of CS which
I can store I can now produce CS in a quicker time frame and of relatively
high ppm, in fact I could go as high as the production process would
allow, for immediate use if and when required, but if ingested it *must*
used while still clear, [my determination].
I now know I can generate a relatively high ppm CS solution in even
quicker time frame if only using a 250ml glass which is what I would do
when necessary to ensure it is used within 12 hours, providing it remains
clear for that time frame, (which I doubt), but there is no problem in
producing more if necessary.
My reasoning is that if taken within 12 hours, (incorporating the above
proviso), it has not had enough time for ions to agglomerate to form the
larger particles, (evidenced by colour), making it ideal for immediate
medicinal purposes.[my determination]
If left to darken, (which would be preferable), it would be ideal for
topical use, and if I decide to ingest it for any reason I would still do
so but in smaller quantities and only for a short time, again only for an
immediate treatment.[my determination]
Well, there you go indi, that's my little experiment done accompanied by
explanations, including the provisos', of the uses I would put the
resultant solution to, covered.
P.S. Colour requires more research as I need to know more about the shape
of the particles and the influence any given shape would have on any given
colour, if that's plausible. I have some information here but want
to find a bit more before I am satisfied.
Neville.
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: silver-list@eskimo.com
Address Off-Topic messages to: silver-off-topic-l...@eskimo.com
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour mdev...@eskimo.com
