[SLUG] 2 problems with Mandrake 9.1
I've used RedHat 8.0 for quite a well with no problem. Yesterday my mate lent me a copy of Mandrake 9.1 and i decided to install it on my machine. All went well, easy installation and configuration (maybe too easy), then i found 2 major problem (so far) 1. I can't use internet. I use a normal dial up server. i could make the connection, and DNS entried are updated in the resolv.conf but seems Mandrake still can't get names resolved. I can't even ping the DNS server. 2. My pc won't shut down. it will just hang at the "Power Down" point. I clicked the "Halt" button last nite b4 i went to bed and this morning the PC is still on. any one here has any clue? thanks J Ai http://search.yahoo.com.au - Yahoo! Search - Looking for more? Try the new Yahoo! Search -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
[SLUG] possible motherboard problem? intel BLKD865PERRL
I upgraded my PC recently from a Piii 600Mhz to Piv2.8Ghz. the mother board i am using now is an intel BLKD865PERRL. It has audio integrated. Fear that this may not work with RedHat 9.0 i disabled the audio on the motherboard. and had my old (and worked) PCI sound card installed. I also used my old hard disk (so that i don't have to reinstall RH9 again). All worked fine, except that now my machine doesn't have sound anymore. The "Soundcard Detection" tool found the right sound card, but it failed to play the sound sample. Also xmms freezed whenever i try to open an audio file.I think this problem's got something to do with my new motherboard. searched on the internet but didn't get any useful information. have you guys encountered such problem? and how did you guys get around it?thanks a lotJ Ai == °²È«Îȶ¨´óÈÝÁ¿£¬ÊÕ·ÑÒÁÃöùÃâ·Ñ30ÈÕÍêÃÀÌåÑé~ Öйú×î´óµÄÃâ·ÑÓÊÏäÔÚµÈÄã 25Õ׿ռä 4Õ׸½¼þ£¡ µã»÷ÍøÒ×ÅÝÅݾªÏ²ÎÞÏÞ È«Ãâ·ÑÊÖ»ú¶ÌÐÅÈÎÄã·¢! -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
[SLUG] How to import Mozilla mail to Evolution?
hi guys, I thought it would be easy, but turned out could not find a clear solution on google. any ideas from you good slugers? am using Evolution 1.4.5 and Mozilla 1.5 J Ai -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
[SLUG] XMMS no sound problem
my xmms stopped working last nite after i upgraded it from 1.2.8 to 1.2.9 when i tried to play anything, it will freeze. i am running Fedora Core 1 and using Gnome as my default desktop env. then i uninstalled xmms and then reinstalled from the CD ROM xmms 1.2.8 still didn't work. all other sounds are working fine (realplayer, mplayer, system sounds etc.) and esd is running. and i checked /dev/dsp .. e.g. fuser /dev/dsp and nobody is using it. any idea, what is going on? thanks -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
[SLUG] very strange problem with my sound card (Fedora Core 1)
i am having a very strange problem with my sound card. it seems that Fedora Core 1 can only recognize my sound card after a rebooting. ... that is everytime i start my machine, it could not recognize my sound card and generates this error in the message file : Apr 4 13:02:47 jlite kernel: es1371: version v0.32 time 16:33:26 Feb 18 2004 Apr 4 13:02:47 jlite kernel: es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06 Apr 4 13:02:47 jlite kernel: es1371: found es1371 rev 6 at io 0xbc00 irq 17 Apr 4 13:02:47 jlite kernel: es1371: features: joystick 0x0 Apr 4 13:02:47 jlite kernel: ac97_codec: AC97 codec, id: (Unknown) after i reboot Apr 4 13:39:03 jlite kernel: es1371: version v0.32 time 16:33:26 Feb 18 2004 Apr 4 13:39:03 jlite kernel: es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06 Apr 4 13:39:03 jlite kernel: es1371: found es1371 rev 6 at io 0xbc00 irq 17 Apr 4 13:39:03 jlite kernel: es1371: features: joystick 0x0 Apr 4 13:39:03 jlite kernel: ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) this is very annoying, and i have no clue what is going on here. does any of you guys had similar problem? and what could be the solution (workaround)? thanks a million -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
[SLUG] [OT] A nice linux friendly Dell laptop
hi all slugers, i am going to sell my Dell inspiron 400 laptop. the spec is as following: Dell Inspiron 4000 PIII 600e 128 Mb memory 20 Gb hd (the original system had only 6Gb, i replaced it with this 20Gb one) 14'1 SVGA CD-ROM/FD USB Modem/LAN TV-Out ATI (16Mb) Video Carry Case Optical Mouse the price i am after is around $750 i've had linx MK8.0 and RH8.0 9.0 installed on this machine without much trouble. so it is a Linux friendly machine. interested parties, please call Jeff on 0402945656 cheers Find local movie times and trailers on Yahoo! Movies. http://au.movies.yahoo.com -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
Re: [SLUG] clamdscan failing
1. i am not sure about qmail-queue-scanner.pl so don't know your problem here. but if you want to scan all you incoming email, there is a mail scanner called amavis, it can use clamdscan as the anti-virus engine. 2. maybe you want to check your /etc/clamd.conf file and change the user from clamav to root. regards J Ai Peter Rundle wrote: Sluggers, just wondering if anyone can help out with a clamdscan problem. I'm using clamscan to scan incomming e-mails under qmail-queue-scanner.pl and it's all working fine detecting virii etc except for the fact that it takes around 2 secs to do the scan. So I wanted to use clamdscan (the front end to clamd) but it fails with this error Can't access the file ERROR If I run it on the command line #> clamdscan msg.pif /root/msg.pif Can't access the file ERROR (yes the file exists with 744 permissions) Ok, so I appear to have some sort of permission problem but I can't figure it out, same error occurs in all directories and with non-root users. any cluesticks? (Fedora core btw) TIA's P. -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
Re: [SLUG] sending output to both screen and log file, how ?
tee is the answer. echo "$now $0 executed for $DOMAIN on in $exectime sec" | tee /var/log/awstats.log Voytek Eymont wrote: I have something like: echo "$now $0 executed for $DOMAIN on in $exectime sec" >> /var/log/awstats.log how can I also send it to screen without repeating the echo line ? Voytek -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
[SLUG] Top and hyperthreading.
Hi guys, Recently i upgraded from FC1 to FC2. My machine's got a P4 2.8 HT, kernel is 2.6.8-1.521smp , lilo.conf has acpismp=force. i found something quite strange. 1. cat /proc/cupinfo shows there are 2 CPUs, which is what i expected. 2. top shows only CPU. I remember with FC1 2.4.*smp kernel, i could see 2 CPUs in "top". 3. I am not noticing a dramatic change in performance, so i am not sure if HT is actually working on my machine. is there anything missing? cheers J Ai -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
[SLUG] urgent! Hard disc dissapeared.
I was doing some recording using audacity, when i tried to save a project, the system froze and i could not switch to a console to shut the machine down, so i had to use the reset button and after this my system could not boot up anymore, it could not a mount the hard disk which i mount to /home ... the error message reads The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap of ufs or something else), then the superblock is currupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 then i log into the rescue mode and the /dev/hdb1 is not there. what is going on here? googling didn't give me much more information. i have all my data on this disk and only have a partial backup ... can anyone please help me? thanks a lot urgent! Hard disc disappeared. J Ai -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
Re: [SLUG] urgent! Hard disc dissapeared.
Thanks a lot Jill and Roger, i unplugged the hd and re-plugged it in and all are fine. ... so ... never thought this could happen. thanks again. regards J Ai Rowling, Jill wrote: Sorry to rain on your parade, but most likely you have a hardware fault. If you open up the box, with the power off, check that the cables are all in place. I have seen a connector fall off a Dell system once. Cheers, Jill. -Original Message- From: Jeff Ai [mailto:[EMAIL PROTECTED] Sent: Wednesday, 11 May 2005 4:13 PM To: Sydney Linux User Group Subject: [SLUG] urgent! Hard disc dissapeared. I was doing some recording using audacity, when i tried to save a project, the system froze and i could not switch to a console to shut the machine down, so i had to use the reset button and after this my system could not boot up anymore, it could not a mount the hard disk which i mount to /home ... the error message reads The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap of ufs or something else), then the superblock is currupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 then i log into the rescue mode and the /dev/hdb1 is not there. what is going on here? googling didn't give me much more information. i have all my data on this disk and only have a partial backup ... can anyone please help me? thanks a lot urgent! Hard disc disappeared. J Ai -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
[SLUG] how to get past date?
Hi guys, how can i get a past date? i.e. the date for last Monday or the first Mondy of last month. do i have to write a script to do it? thanks a lot J Ai http://mobile.yahoo.com.au - Yahoo! Messenger for SMS - Always be connected to your Messenger Friends -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
[SLUG] linux printer sharing Canon LBP1120
Hello I bought a canon LBP1120 laser printer. Set it up on my linux file/printer server without any problem. I could print from my windows machine and from the server itself. Then i tried to print from my other linux machine, i was able to load the driver on that machine and config the printer, however, it won't print. I could see the job in print q (on the server side) and it said "is ready and printing" the job status was active too. LBP1120 is ready and printing jeffai: active[job 23 localhost] smbprn.0020 Remote Downlevel Docume 172032 bytes Anyone here had this problem before? and how to fix it? many thanks J Ai Send instant messages to your online friends http://au.messenger.yahoo.com -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
Re: [SLUG] linux printer sharing Canon LBP1120
Thanks Richard I am pretty new on CUPS, could you please give me a bit more information? e.g what i need to do to set it up on the server side/client side? another thing with my current setting is that if i restart my ccpd, it will print the previous queued job. regards J Ai Richard wrote: with cups on the client side you don't use a driver you just point it at the remote cups server/printer. On Sun, 2005-10-23 at 14:33 +1000, Jeff Ai wrote: Hello I bought a canon LBP1120 laser printer. Set it up on my linux file/printer server without any problem. I could print from my windows machine and from the server itself. Then i tried to print from my other linux machine, i was able to load the driver on that machine and config the printer, however, it won't print. I could see the job in print q (on the server side) and it said "is ready and printing" the job status was active too. LBP1120 is ready and printing jeffai: active[job 23 localhost] smbprn.0020 Remote Downlevel Docume 172032 bytes Anyone here had this problem before? and how to fix it? many thanks J Ai Send instant messages to your online friends http://au.messenger.yahoo.com Regards Richard Neal "Obscurity is a far greater threat to authors than copyright infringement, or even outright piracy." Seen on Slashdot 30-09-2005 Send instant messages to your online friends http://au.messenger.yahoo.com -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
[SLUG] RedHat 7.2 network installation problem
hello guys, i am having a problem installing RedHat 7.2 using a PCMCIA network card (D-Link DFE660) on a Compaq Armada laptop. I have a linux desktop set up as a DHCP server and ftp server (Mandrake 8.1) I made the pcmcia boot disk and pcmcia driver disk. boot from the disk is ok, so is the driver. Linux detected my d-link card ok and asked me to config the TCP/IP. I selected using DHCP and from the syslog on the DHCP server i can see that an IP has been assigned to the laptop. However, the laptop did not give me any error message nor did it allow me to select the network installation methods (FTP, HTTP or NFS). If i configure the TCP/IP using static IP(192.168.0.250, MASK 255.255.255.0 no gateway, no DNS), then choose install from FTP, it gives me that error that could not connect the FTP server (192.168.0.103 no message in the syslog off course). I think those two machines are not networked. do you guys have any idea what is going on here? thanks a lot Jeff http://my.yahoo.com.au - My Yahoo! - It's My Yahoo! Get your own! -- SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
Re: [SLUG] RedHat 7.2 network installation problem
It's pc-hub-pc connection. and i think the cables are ok. coz i can see a DHCP request has been recieved by the dhcp server and a ip has been offered. this is the message from /var/log/message Jan 13 13:04:10 mightymouse dhcpd: DHCPOFFER on 192.168.0.249 to 00:50:ba:7b:12:58 via eth0 when static ip is used. this is my config IP: 192.168.0.250 Netmask: 255.255.255.0 Default Gateway: n/a Primary nameserver: n/a then FTP server: 192.168.0.103 (this is also the dhcp server) --- Greg Hosler <[EMAIL PROTECTED]> wrote: > is this pc to pc, or pc to hub to pc ? > > in the 1st case you need 1 cross cable > > in the 2nd case you need 2 straight cables > > if you do not have the correct utp cable wiring, > then you're network won't > connect. One test is to ping (using the ip numbers) > once the network is > configured (ifconfig/route). > > another thing to check is that the routing is > correct, and esp that the default > route (though for a local install, all lan > references local, standard netmask > routing ought to be sufficient). > > -Greg > > On 12-Jan-2002 Jeff Ai wrote: > > hello guys, i am having a problem installing > RedHat > > 7.2 using a PCMCIA network card (D-Link DFE660) on > a > > Compaq Armada laptop. > > I have a linux desktop set up as a DHCP server and > ftp > > server (Mandrake 8.1) > > I made the pcmcia boot disk and pcmcia driver > disk. > > boot from the disk is ok, so is the driver. Linux > > detected my d-link card ok and asked me to config > the > > TCP/IP. > > I selected using DHCP and from the syslog on the > DHCP > > server i can see that an IP has been assigned to > the > > laptop. However, the laptop did not give me any > error > > message nor did it allow me to select the network > > installation methods (FTP, HTTP or NFS). > > If i configure the TCP/IP using static > > IP(192.168.0.250, MASK 255.255.255.0 no gateway, > no > > DNS), then choose install from FTP, it gives me > that > > error that could not connect the FTP server > > (192.168.0.103 no message in the syslog off > course). I > > think those two machines are not networked. > > > > do you guys have any idea what is going on here? > > > > thanks a lot > > > > Jeff > > > > http://my.yahoo.com.au - My Yahoo! > > - It's My Yahoo! Get your own! > > -- > > SLUG - Sydney Linux User Group Mailing List - > http://slug.org.au/ > > More Info: http://lists.slug.org.au/listinfo/slug > > +-+ >You can release software that's good, software > that's inexpensive, or >software that's available on time. You can > usually release software >that has 2 of these 3 attributes -- but not all > 3. > | Greg Hosler > [EMAIL PROTECTED]| > +-+ http://my.yahoo.com.au - My Yahoo! - It's My Yahoo! Get your own! -- SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
Re: [SLUG] RedHat 7.2 network installation problem
I found this interesting. when a dhcp client requests a IP those messages will be logged: Jan 13 14:04:48 mightymouse dhcpd: DHCPDISCOVER from 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPOFFER on 192.168.0.250 to 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPDISCOVER from 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPOFFER on 192.168.0.250 to 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPDISCOVER from 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPOFFER on 192.168.0.250 to 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPREQUEST for 192.168.0.250 (192.168.0.103) from 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPACK on 192.168.0.250 to 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPREQUEST for 192.168.0.250 (192.168.0.103) from 00:50:ba:7b:12:58 via eth0 Jan 13 14:04:49 mightymouse dhcpd: DHCPACK on 192.168.0.250 to 00:50:ba:7b:12:58 via eth0 192.168.0.103 is my dhcp server and 192.168.0.250 is the IP assigned to the client however, when i choose to use DHCP when installing i have one message logged: Jan 13 13:04:10 mightymouse dhcpd: DHCPOFFER on 192.168.0.249 to 00:50:ba:7b:12:58 via eth0 does this mean anything? Jeff http://my.yahoo.com.au - My Yahoo! - It's My Yahoo! Get your own! -- SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
Re: [SLUG] RedHat 7.2 network installation problem
I gave up on RH last night, turned to Mandrake 8.1 all worked fine with just one boot diskette. I am wondering could it be a problem with the RH pcmciadd.img? anyway, thanks for your help. Jeff My Yahoo! - It's My Yahoo! Get your own!
[SLUG] Fwd: FYI: RedHat 7.3 probably has bugs with Real-time scheduler
Note: forwarded message attached. http://www.sold.com.au - SOLD.com.au - Find yourself a bargain! --- Begin Message --- Hi, everybody I found that RedHat 7.3 probably have bugs with Real-time scheduler. I have run test programs to assess priority inversion of TAO on both Windows 2000 and Redhat Linux. Results from Win2000 are good but the problem bothering me last two days is that the real-time priority of a thread in RedHat 7.3 seems not to work and the higher priority task do not have significant precedence over the lower ones. I could not identify where the problem was until this evening I use a process monitoring tool called qps that can change the scheduling policies and priorities at run-time. It is revealed that changes to the real-time priority have little impact on behavior of real-time threads. In contrast, changes to dynamic priorities of threads in time-sharing scheduling class with "nice" have much more noticeable effect on the CPU time allocation among threads. I suspect that something is wrong with the scheduler. So I run the exactly the same test programs on another RedHat 7.0 machine in SEDAL lab. The results are perfect and consist with other researchers' results regarding real-time support of COTS operating systems. My RedHat 7.3 is 6 CD with the red cover installation manual, which is distributed by RedHat directly rather that intermediate re-copiers Jeff Z _ Chat with friends online, try MSN Messenger: http://messenger.msn.com --- End Message ---
[SLUG] LDAP server on Linux
Title: LDAP server on Linux Anyone knows how to set up a LDAP server on Linux box? Netscape Server or Open LDAP. thanks XT3 has changed its name to Ion Global Australia. Jeff Ai Tel: (612) 99002416 Direct Fax: (612) 9900 2010 Ion Global Australia <http://www.ionglobal.com.au> Ion Global <http://www.ion-global.com/> strategic e-business integration HK | China | Singapore | Japan | Korea | Taiwan | Thailand | Australia | USA | UK chinadotcom corporation <http://www.corp.china.com/> ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify Ion Global Technical Services at: [EMAIL PROTECTED] **
[SLUG] samba question.
Title: samba question. Hi guys, i am trying to set up a samba server on a new Solaris box (the first non-win system in this company), made the smb.conf file like this: [global] workgroup = EMERALD server string = SAMBA security = SHARE # i haven't set up all the accounts. so currently use SHARE password level = 8 read prediction = Yes character set = ISO8859-1 os level = 65 preferred master = Yes domain master = Yes wins support = Yes locking = No [temp] path = /tmp writeable = Yes guest ok = Yes locking = Yes [SPACE] path = /space guest ok = Yes locking = Yes The /space directory contains some files i'd like to be shared by everyone in the workgroup(as guest). While they can access /tmp without problem, they can't access the /space from Windows Explorer. It says "\\Unix\space is not accessable. The network name cannot be found" The permission of the /space is set as: drw-rw-rw- 11 root root 512 Jul 3 16:20 space Did i do anything wrong? Thanks for you help in advance. Jeff ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify Ion Global Technical Services at: [EMAIL PROTECTED] **
RE: [SLUG] samba question.
Title: RE: [SLUG] samba question. Yes that fixed the problem. Thanks. -Original Message- From: Tony Green [mailto:[EMAIL PROTECTED]] Sent: Wednesday, 4 July 2001 11:40 AM To: Jeff Ai Cc: [EMAIL PROTECTED] Subject: Re: [SLUG] samba question. * This one time, at band camp, Jeff Ai said: > The permission of the /space is set as: > drw-rw-rw- 11 root root 512 Jul 3 16:20 space > > Did i do anything wrong? > No execute (x) bit set on the directory. Add the bit and try accessing it as the 'guest user' (nobody?) from the unix CLI. When you can access it with that user, try again with samba. Greeno PS: man chmod for info on permissions and the execute bit -- Greeno <[EMAIL PROTECTED]> GnuPG Key : 1024D/B5657C8B Key fingerprint = 9ED8 59CC C161 B857 462E 51E6 7DFB 465B B565 7C8B Imagine working in a secure environment and finding the string _NSAKEY in the OS binaries without a good explanation -Alan Cox 04/05/2001 ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify Ion Global Technical Services at: [EMAIL PROTECTED] **
[SLUG] how can i echo * character
Hello guys, how can i get the * character in shellscript(bash) I tried use '*' and it desn't work. Jeff ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify Ion Global Technical Services at: [EMAIL PROTECTED] **
RE: [SLUG] how can i echo * character
Fixed by Tony Green STAR='*' echo "$STAR" -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jeff AiSent: Friday, 14 September 2001 3:15 PMTo: 'Slug (E-mail)Subject: [SLUG] how can i echo * character Hello guys, how can i get the * character in shellscript(bash) I tried use '*' and it desn't work. Jeff**This email and any files transmitted with it are confidential andintended solely for the use of the individual or entity to whom theyare addressed. If you have received this email in error please notifyIon Global Technical Services at:[EMAIL PROTECTED]** ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify Ion Global Technical Services at: [EMAIL PROTECTED] **
