[sniffer] It's official. SNF Version 3.0 is Ready!
Hello Sniffer folks, Back in Q1 we were sure we'd be ready with the new SNF after nearly a year of testing on both large and small systems. What a surprise! After publishing the first release candidate we went from version 1-5 to version 2-27 at a breathtaking pace! Thank you to everyone who has tested, poked, prodded, and twisted the new SNF -- not to mention keeping up with all of those updates during the final phase of testing. I can't imagine getting to this point without your patience, trust, attention to detail, and persistence! Bravo! Without further fanfare: Today the latest release candidate becomes the official production release of Message Sniffer (SNF) Version 3.0. The changes: -- Minor updates to readme files. -- Changed the build / version information and recompiled. -- Removed redundant comments from the configuration file. We have been bug free for more than 2 months with several hundred systems using the new engine. You can download the latest distributions from this page: http://www.armresearch.com/products/index.jsp You may also notice that we've published our new web site! There are a few bits of documentation still under construction here and there, but we're well on our way to filling those in along with a stream of continues improvements and additions based on our work with you! Once again, Thanks to everyone for a fantastic job! Thanks for all of your support, comments, and efforts! As always we're hear to help. Now, onward to the next upgrade... always work to do ;-) Cheers! _M -- Pete McNeil Chief Scientist, Arm Research Labs, LLC. # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
[sniffer] Re: It's official. SNF Version 3.0 is Ready!
Congratulations on shipping, Pete! Andrew 8) p.s. Hey, I love the new mascot. Much cuter than the old SortMonster... -Original Message- From: Message Sniffer Community [mailto:[EMAIL PROTECTED] On Behalf Of Pete McNeil Sent: Thursday, June 26, 2008 12:24 PM To: Message Sniffer Community Subject: [sniffer] It's official. SNF Version 3.0 is Ready! Hello Sniffer folks, Back in Q1 we were sure we'd be ready with the new SNF after nearly a year of testing on both large and small systems. What a surprise! After publishing the first release candidate we went from version 1-5 to version 2-27 at a breathtaking pace! Thank you to everyone who has tested, poked, prodded, and twisted the new SNF -- not to mention keeping up with all of those updates during the final phase of testing. I can't imagine getting to this point without your patience, trust, attention to detail, and persistence! Bravo! Without further fanfare: Today the latest release candidate becomes the official production release of Message Sniffer (SNF) Version 3.0. The changes: -- Minor updates to readme files. -- Changed the build / version information and recompiled. -- Removed redundant comments from the configuration file. We have been bug free for more than 2 months with several hundred systems using the new engine. You can download the latest distributions from this page: http://www.armresearch.com/products/index.jsp You may also notice that we've published our new web site! There are a few bits of documentation still under construction here and there, but we're well on our way to filling those in along with a stream of continues improvements and additions based on our work with you! Once again, Thanks to everyone for a fantastic job! Thanks for all of your support, comments, and efforts! As always we're hear to help. Now, onward to the next upgrade... always work to do ;-) Cheers! _M -- Pete McNeil Chief Scientist, Arm Research Labs, LLC. # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]> # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
[sniffer] Re: It's official. SNF Version 3.0 is Ready!
Pete, Now that you got that taken care of, can you give us an idea when you expect 4.0 to be released? Matt Pete McNeil wrote: Hello Sniffer folks, Back in Q1 we were sure we'd be ready with the new SNF after nearly a year of testing on both large and small systems. What a surprise! After publishing the first release candidate we went from version 1-5 to version 2-27 at a breathtaking pace! Thank you to everyone who has tested, poked, prodded, and twisted the new SNF -- not to mention keeping up with all of those updates during the final phase of testing. I can't imagine getting to this point without your patience, trust, attention to detail, and persistence! Bravo! Without further fanfare: Today the latest release candidate becomes the official production release of Message Sniffer (SNF) Version 3.0. The changes: -- Minor updates to readme files. -- Changed the build / version information and recompiled. -- Removed redundant comments from the configuration file. We have been bug free for more than 2 months with several hundred systems using the new engine. You can download the latest distributions from this page: http://www.armresearch.com/products/index.jsp You may also notice that we've published our new web site! There are a few bits of documentation still under construction here and there, but we're well on our way to filling those in along with a stream of continues improvements and additions based on our work with you! Once again, Thanks to everyone for a fantastic job! Thanks for all of your support, comments, and efforts! As always we're hear to help. Now, onward to the next upgrade... always work to do ;-) Cheers! _M # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
[sniffer] Re: It's official. SNF Version 3.0 is Ready!
Hello Matt, Thursday, June 26, 2008, 4:21:42 PM, you wrote: > Pete, > Now that you got that taken care of, can you give us an idea when you > expect 4.0 to be released? Hehehe. We're not close enough to that to be remotely accurate, but I will tell you that I'd like it to be within something approaching a year. There are a lot of continuous upgrades to do on the back-end that will unleash and enhance V3's power and provide additional tools and products along the way -- plus plenty of work helping new third party products get off the ground w/ SNF inside... So we'll be plenty busy and we'll keep you posted. _M -- Pete McNeil Chief Scientist, Arm Research Labs, LLC. # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
[sniffer] Re: It's official. SNF Version 3.0 is Ready!
Pete, Glad you got the joke. I'll allow you a a little time to take your mind off of the future :) Thanks, Matt Pete McNeil wrote: Hello Matt, Thursday, June 26, 2008, 4:21:42 PM, you wrote: Pete, Now that you got that taken care of, can you give us an idea when you expect 4.0 to be released? Hehehe. We're not close enough to that to be remotely accurate, but I will tell you that I'd like it to be within something approaching a year. There are a lot of continuous upgrades to do on the back-end that will unleash and enhance V3's power and provide additional tools and products along the way -- plus plenty of work helping new third party products get off the ground w/ SNF inside... So we'll be plenty busy and we'll keep you posted. _M
[sniffer] Re: It's official. SNF Version 3.0 is Ready!
Hi Pete, I've installed the Mdaemon Plugin version. I can't download a valid update. snf2chk keeps saying it's an invalid gzip. Do you have any suggestions on what I can try to track down the problem? Thanks, Daniel -- Daniel Bayerdorffer, VP [EMAIL PROTECTED] Numberall Stamp & Tool Co., Inc. www.numberall.com PO Box 187, Sangerville, ME 04479 USA TEL: 207-876-3541 FAX: 207-876-3566 # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
[sniffer] Re: It's official. SNF Version 3.0 is Ready!
Hello Daniel, Thursday, June 26, 2008, 8:58:36 PM, you wrote: > Hi Pete, > I've installed the Mdaemon Plugin version. I can't download a valid update. > snf2chk keeps saying it's an invalid gzip. Do you have any suggestions on > what I can try to track down the problem? I'm a little bit confused. I'm going to guess that you're talking about a rulebase update. getRulebase.cmd script should be able to do everything that's needed. What I think you've said is that you downloaded the file -- accepted a gzip, and then tried to check it with snf2check. You would first have to unzip the file and then check the unzipped file with snf2check. Hope that makes sense. Please straighten me out if it doesn't. Thanks, _M -- Pete McNeil Chief Scientist, Arm Research Labs, LLC. # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
[sniffer] Re: It's official. SNF Version 3.0 is Ready!
Good work Pete! We've been using the previous beta build on a few systems (windows) and it has worked flawlessly. I look forward to using version 3 -Original Message- From: Message Sniffer Community [mailto:[EMAIL PROTECTED] On Behalf Of Pete McNeil Sent: Friday, June 27, 2008 3:24 AM To: Message Sniffer Community Subject: [sniffer] It's official. SNF Version 3.0 is Ready! Hello Sniffer folks, Back in Q1 we were sure we'd be ready with the new SNF after nearly a year of testing on both large and small systems. What a surprise! After publishing the first release candidate we went from version 1-5 to version 2-27 at a breathtaking pace! Thank you to everyone who has tested, poked, prodded, and twisted the new SNF -- not to mention keeping up with all of those updates during the final phase of testing. I can't imagine getting to this point without your patience, trust, attention to detail, and persistence! Bravo! Without further fanfare: Today the latest release candidate becomes the official production release of Message Sniffer (SNF) Version 3.0. The changes: -- Minor updates to readme files. -- Changed the build / version information and recompiled. -- Removed redundant comments from the configuration file. We have been bug free for more than 2 months with several hundred systems using the new engine. You can download the latest distributions from this page: http://www.armresearch.com/products/index.jsp You may also notice that we've published our new web site! There are a few bits of documentation still under construction here and there, but we're well on our way to filling those in along with a stream of continues improvements and additions based on our work with you! Once again, Thanks to everyone for a fantastic job! Thanks for all of your support, comments, and efforts! As always we're hear to help. Now, onward to the next upgrade... always work to do ;-) Cheers! _M -- Pete McNeil Chief Scientist, Arm Research Labs, LLC. # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]> # This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
