Re: [RCSE] Organic Servos
Phil and all, I decided to use an Airtronics 761 for the flap, yes did have to trim away some of the rib. I'm going with HS-85,s for the rest of the setup as they are the smallest servos with ball bearings I have available. I want good holding power for the launches. :-) Thanks for all the input. BTW: I just returned from the IHLGF in Poway, and all I can say is WOWOWOWOW! This year was the best fly-off show I have ever seen, even better than the ones I participatedin, Many years ago :-( I hurt my back the day I left for the event, so had to have someone throw for me, And need to thank everyone, yes even Paul, (it wasn't his fault the fuse broke!) for allowing me to enjoy the event. Especially Dave Leedom who graciously provided me with a plane to finish the contest with. Then proceded to have a midair with me (Both his planes involved) He completed the round and I had to have him help me repair and get it back in the air the next round, TPG had a lot of new faces and they carried on the great tradition of fun and a well run event. My hats off to everyone who participated in that effort. Thanks again George & Jo At 02:33 PM 6/3/2008 +, you wrote: >George, on my old Organic I used Hitec 85 bb's for everything except the flat which is an >85MG. I had to relieve some of the balsa in the rib to make the flap servo fit in the proper >location. > >On my new Organic I'm using Hitec 81's all the way around except for the flap which is also >an 85 MG. > >I think these may be overkill but you really can't beat the price or speed. I think George >Kennedy recommends the JR 241's or an alike. These have about 17 oz. of torque compared >to the Hitec's 30. However, all that said, I think holding power and centering are the two >most important requirements over torque. > >You'll love your Organic. > >Phil > >RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format > Smooth Landings George RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] test
test RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] "My High End is ready to fly...Yours?
Got it done weighs just a bit more than my DLG's Very flat wing Only hand tossed a few times Rudder is extremely effective Yep , horizon's DSM2 2.4system in it How's your's coming? Gordy Taipai or bust RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] Looking for someone not on RCSE
3.7 Sharon Pro V-Tail fuse, new or used but not broken. Also if other parts are available will consider. Or a complete 3.7 Sharon Pro (V-Tail) with or without radio. Regards, Dave Corven. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] (Off Topic) Need info on product naming
Looking for someone on the list , most likely a legal type, that can provide some insight into product naming and what rights might exist, if any, for a product that is not trademarked or patented product. Please contact me off-line if you can assist. (Thanks for the bandwidth) Sheldon US Soaring Nationals Head Turnaround Troll And Launch Matrix
[RCSE] Re: Soaring V1 #11287 (Out of Office)
I will be out of the office from June 11-13. Thank you, Mike Weinstein --- WakeMed Confidentiality Notice: This message, including any attachments, is for the sole use of the individual or entity to whom it is addressed and may contain confidential and/or legally privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Any unauthorized review, use, copying, disclosure, or distribution of this message and attachments is strictly prohibited. ---
[RCSE] Selling my last Estrella... :-(
http://www.rcgroups.com/forums/showthread.php?t=877709 Follow the thread to RC Groups for photo's and the add. Asking 1600 USD ready to fly including ballast, and you pay shipping from So Cal. Local delivery or pick-up would be ok though. Thanks for your time. Mike Smith RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
