So far I'm batting 0. I can't seem to get my Spectra equipped Eclipse to
work with all of my JR 600 receivers. Now, I'm trying to program a simple
three channel glider. Rudder, Elevator and Flaps.
I would like to have the flaps on the throttle stick. I would also like to
program in Flap/elevator compensation so that when I deploy the flaps with
my throttle stick the elevator moves to compensate for the pitch change.
I seems that I cannot program these custom mixes in the Glider mode but I
was able to program in throttle control for flaps by slaving channel 6 to
channel 3 (throttle on a non JR RX) Next, I tried to do a second custom mix
that made channel 3 (throttle) the master and channel 2 the slave. When I
tried to set the percentage of elevator (slave) to throttle (master) I could
not seem to get the slave channel set to the 20% starting point that I
wanted to try.
Is it possible to do the set up I am describing in either the Acro mode or
the Glider mode with this TX. I had no trouble doing this with the JR 347
that I sold but with the Eclipse I stumped.
What am I missing?
Ed
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED]