Andrew E. Mileski wrote: > You can buy ejector pins by the dozen from the manufacturers, or singly > at a > slight premium from resellers. > > Example: McMaster-Carr item #93772A334 is a 1/4 x 14 inch rod for $7.56 USD > http://www.mcmaster.com/cgi/loadpage.cgi?pagenum=3043&descid=11008 > Cut the head off and trim it to 10 1/2 inches (the standard BoT length) or > whatever is required to fit, by using with a rotary tool and an abrasive > cutting disc. I also like to slightly round the ends with an grinding bit, > then sand (600 grit disc) and polish the ends so the rod inserts easily.
The link appears to be session tied, so just go to http://www.mcmaster.com/ and do a search on "ejector pin". If you want to save $$$$ and need a few pins, buy them from the manufacturer: http://www.ntm.com/ http://www.royalpins.com/ http://www.dixiepins.com/ Example: Royal sells the same size pin for $3.78 USD each in a box of 12, and NTM sell them for $3.75 USD in boxes of 20. A BIG savings. Which of course are in my marvelous bookmarks under RC -> Wing Rods http://isoar.ca/~andrewm/bkmks.html and you can navigate there from isoar.ca, which is easier to remember :) -- Andrew E. Mileski Ottawa, Canada RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]