Re: [Soekris] Replace an ADSL modem-router
Lars Nooden [l...@umich.edu] wrote: Chris Cappuccio wrote: this is essentially the same as an ultra-cheap versatek 170p modem... Not at all the same capabilities. Compare: http://www.traverse.com.au/downloads/adsl/vikingdat_03.pdf http://www.versatek.com/products/vxver170p.htm Point to a HOWTO for running the 170p with NetBSD, OpenBSD or a Linux. I'll write one. Here it is: 1. Plug in the ethernet cable 2. ifconfig YourEthernet0 192.168.0.2/24 3. Telnet or HTTP to 192.168.0.1 4. Configure VPI/VCI and mode (RFC 1483 bridging, PPPoA, PPPoE, etc...) 5. Party like it's 1999 ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] Replace an ADSL modem-router
Chris Cappuccio wrote: Lars Nooden [l...@umich.edu] wrote: Chris Cappuccio wrote: this is essentially the same as an ultra-cheap versatek 170p modem... Not at all the same capabilities. Compare: http://www.traverse.com.au/downloads/adsl/vikingdat_03.pdf http://www.versatek.com/products/vxver170p.htm Point to a HOWTO for running the 170p with NetBSD, OpenBSD or a Linux. I'll write one. Here it is: 1. Plug in the ethernet cable 2. ifconfig YourEthernet0 192.168.0.2/24 3. Telnet or HTTP to 192.168.0.1 4. Configure VPI/VCI and mode (RFC 1483 bridging, PPPoA, PPPoE, etc...) 5. Party like it's 1999 Hmm. You've skipped the part about loading the 170p with OpenWRT, Tomato, PFSense or something similar... -Lars ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] Replace an ADSL modem-router
Lars Nooden [l...@umich.edu] wrote: Chris Cappuccio wrote: Lars Nooden [l...@umich.edu] wrote: Chris Cappuccio wrote: this is essentially the same as an ultra-cheap versatek 170p modem... Not at all the same capabilities. Compare: http://www.traverse.com.au/downloads/adsl/vikingdat_03.pdf http://www.versatek.com/products/vxver170p.htm Point to a HOWTO for running the 170p with NetBSD, OpenBSD or a Linux. I'll write one. Here it is: 1. Plug in the ethernet cable 2. ifconfig YourEthernet0 192.168.0.2/24 3. Telnet or HTTP to 192.168.0.1 4. Configure VPI/VCI and mode (RFC 1483 bridging, PPPoA, PPPoE, etc...) 5. Party like it's 1999 Hmm. You've skipped the part about loading the 170p with OpenWRT, Tomato, PFSense or something similar... The Broadcom ADSL chipset on the 170p is the same chipset used on the realtek/adsl combo card. I can't tell if you're trolling me or if these things are really supported by some open crap. It's not trivial since the 170p has something like 2mb flash and 1mb ram. The ATM stuff is all emulated in software by the Linux kernel with the 170p default software but I think the ADSL chip bundle is probably some proprietary blob. ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
