Re: [spamdyke-users] simscan, spamassassin and spamdyke
I don't think that my configuration is incorrect because clamav,spamassassin and simscan works fine without spamdyke. Simscan works also with spamdyke, but skip spamc. It's really strange. > > It doesn't work on my system and I don't understand why. :-( > > Maybe my configure options of simscan helps? > > ./configure \ > --enable-user=simscan \ > --enable-per-domain=y \ > --enable-spam=y \ > --enable-spamc-user=y \ > --enable-spam-hits \ > --enable-clamav=y \ > --enable-received=y \ > --enable-attach=y \ > --enable-ripmime \ > --enable-custom-smtp-reject=y > > best, > -hartmut > > > > > > -Ursprüngliche Nachricht- > > > Von: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Im Auftrag > von Hartmut > > > Wernisch > > > Gesendet: Mittwoch, 12. November 2008 14:21 > > > An: spamdyke users > > > Betreff: Re: [spamdyke-users] simscan, spamassassin and spamdyke > > > > > > > > > Here my config files using spamassassin with simscan: > > > > > > [tcp.smtp] > > > > > > :allow,QMAILQUEUE="bin/simscan" > > > > > > > > > [simcontrol] > > > > > > xxx.xxx:clam=yes,spam=yes,spam_hits=10 > > > :clam=no,spam=no > > > > > > > > > [smtpd in qmail init file] > > > > > > ulimit -v 16384 > > > sh -c "start-stop-daemon --start --quiet --user > vpopmail \ > > > --pidfile /var/run/tcpserver_smtpd.pid > --make-pidfile \ > > > --exec /usr/bin/tcpserver -- -v -R -H -c 100 \ > > > -u `id -u vpopmail` \ > > > -g `id -g vpopmail` \ > > > -x /etc/tcp.smtp.cdb \ > > > 0 smtp \ > > > /var/qmail/bin/spamdyke --config-file > /etc/spamdyke.conf \ > > > /usr/sbin/qmail-smtpd \ > > > /var/vpopmail/bin/vchkpw /bin/true 2>&1 \ > > > | /usr/bin/setuidgid qmaill /usr/bin/multilog \ > > > t n100 s500 /var/log/smtp &" > > > > > > > > > Sending from my account to my account results in no scanning by > > > spamassassin. Only mails not sending by me with smtp-auth > are passed > > > through spamassassin. > > > > > > Hope this helps :) > > > > > > cu, > > > -harti > > > > > > On 12 Nov 08, Bernd Hoffmann wrote: > > > > I know the site (http://qmail.jms1.net/simscan) and I > > > patched simscan > > > > with simscan-1.4.0-combined.4.patch. I also rebuild > > > tcp.smtp.cdb and > > > > simcontrol.cdb after any change of tcp.smtp and simcontrol. > > > > > > > > Here are the outpot of the logfile without spamdyke in > qmailrunfile: > > > > > > > > simscan: calling clamdscan > > > > simscan: cdb looking up version clamav > > > > simscan: normal clamdscan return code: 0 > > > > simscan: calling spamc > > > > simscan: calling /usr/local/bin/spamc spamc -u EMAIL > > > > simscan: cdb looking up version spam simscan:[4160]:CLEAN > > > > (-101.40/7.00):0.6086s:Testmail:10.10.0.3:EMAILFROM:EMAILTO > > > > simscan: done, execing qmail-queue > > > > simscan: qmail-queue exited 0 > > > > > > > > When I add spamdyke to my qmailrunfile, I get the following > > > log entries: > > > > > > > > simscan: calling clamdscan > > > > simscan: cdb looking up version clamav > > > > simscan: normal clamdscan return code: 0 > > > > simscan:[4213]:RELAYCLIENT:0.0652s:-:10.10.0.3:EMAILFROM:EMAILTO > > > > simscan: done, execing qmail-queue > > > > simscan: qmail-queue exited 0 > > > > > > > > As you can see, spamc will not calling by simscan. > > > > > > > > Can you show me your tcp.smtp file and also your > > > > qmail-smtpd-run-script, harti? > > > > > > > > Thanks in advance. > > > > > > > > Bernd > > > > > > > > > > > > > I have no problem running spamdyke, simscan, clamav, > f-prot and > > > > > spamassassin. > > > > > > > > > > Are you sure you rebuild the cdb files after making changes? > >
Re: [spamdyke-users] simscan, spamassassin and spamdyke
On 14 Nov 08, Bernd Hoffmann wrote: > It doesn't work on my system and I don't understand why. :-( Maybe my configure options of simscan helps? ./configure \ --enable-user=simscan \ --enable-per-domain=y \ --enable-spam=y \ --enable-spamc-user=y \ --enable-spam-hits \ --enable-clamav=y \ --enable-received=y \ --enable-attach=y \ --enable-ripmime \ --enable-custom-smtp-reject=y best, -hartmut > > > -Ursprüngliche Nachricht- > > Von: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Im Auftrag von > > Hartmut Wernisch > > Gesendet: Mittwoch, 12. November 2008 14:21 > > An: spamdyke users > > Betreff: Re: [spamdyke-users] simscan, spamassassin and spamdyke > > > > > > Here my config files using spamassassin with simscan: > > > > [tcp.smtp] > > > > :allow,QMAILQUEUE="bin/simscan" > > > > > > [simcontrol] > > > > xxx.xxx:clam=yes,spam=yes,spam_hits=10 > > :clam=no,spam=no > > > > > > [smtpd in qmail init file] > > > > ulimit -v 16384 > > sh -c "start-stop-daemon --start --quiet --user vpopmail \ > > --pidfile /var/run/tcpserver_smtpd.pid --make-pidfile \ > > --exec /usr/bin/tcpserver -- -v -R -H -c 100 \ > > -u `id -u vpopmail` \ > > -g `id -g vpopmail` \ > > -x /etc/tcp.smtp.cdb \ > > 0 smtp \ > > /var/qmail/bin/spamdyke --config-file /etc/spamdyke.conf \ > > /usr/sbin/qmail-smtpd \ > > /var/vpopmail/bin/vchkpw /bin/true 2>&1 \ > > | /usr/bin/setuidgid qmaill /usr/bin/multilog \ > > t n100 s500 /var/log/smtp &" > > > > > > Sending from my account to my account results in no scanning > > by spamassassin. Only mails not sending by me with smtp-auth > > are passed through spamassassin. > > > > Hope this helps :) > > > > cu, > > -harti > > > > On 12 Nov 08, Bernd Hoffmann wrote: > > > I know the site (http://qmail.jms1.net/simscan) and I > > patched simscan > > > with simscan-1.4.0-combined.4.patch. I also rebuild > > tcp.smtp.cdb and > > > simcontrol.cdb after any change of tcp.smtp and simcontrol. > > > > > > Here are the outpot of the logfile without spamdyke in qmailrunfile: > > > > > > simscan: calling clamdscan > > > simscan: cdb looking up version clamav > > > simscan: normal clamdscan return code: 0 > > > simscan: calling spamc > > > simscan: calling /usr/local/bin/spamc spamc -u EMAIL > > > simscan: cdb looking up version spam > > > simscan:[4160]:CLEAN > > > (-101.40/7.00):0.6086s:Testmail:10.10.0.3:EMAILFROM:EMAILTO > > > simscan: done, execing qmail-queue > > > simscan: qmail-queue exited 0 > > > > > > When I add spamdyke to my qmailrunfile, I get the following > > log entries: > > > > > > simscan: calling clamdscan > > > simscan: cdb looking up version clamav > > > simscan: normal clamdscan return code: 0 > > > simscan:[4213]:RELAYCLIENT:0.0652s:-:10.10.0.3:EMAILFROM:EMAILTO > > > simscan: done, execing qmail-queue > > > simscan: qmail-queue exited 0 > > > > > > As you can see, spamc will not calling by simscan. > > > > > > Can you show me your tcp.smtp file and also your > > > qmail-smtpd-run-script, harti? > > > > > > Thanks in advance. > > > > > > Bernd > > > > > > > > > > I have no problem running spamdyke, simscan, clamav, f-prot and > > > > spamassassin. > > > > > > > > Are you sure you rebuild the cdb files after making changes? > > > > (tcp.smtp.cdb and simcontrol.cdb) > > > > > > > > You can enable simscan debugging by adding environmen variable in > > > > your /etc/tcp.smtp file: > > > > > > > > SIMSCAN_DEBUG=2 > > > > > > > > Maybe you are also interessted in a good site providing > > some patches > > > > for simscan (if you don't know it already:): > > > > > > > > http://qmail.jms1.net/simscan/ > > > > > > > > > > > > best, > > > > -harti > > > > > > > > On 11 Nov 08, [EMAIL PROTECTED] wrote: > > > > > thanks for your answers. > > &
Re: [spamdyke-users] simscan, spamassassin and spamdyke
Have you compared your simscan configuration to the one used by qmailtoaster.com? Bernd Hoffmann wrote: > It doesn't work on my system and I don't understand why. :-( > >> -Ursprüngliche Nachricht- >> Von: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] Im Auftrag von >> Hartmut Wernisch >> Gesendet: Mittwoch, 12. November 2008 14:21 >> An: spamdyke users >> Betreff: Re: [spamdyke-users] simscan, spamassassin and spamdyke >> >> >> Here my config files using spamassassin with simscan: >> >> [tcp.smtp] >> >> :allow,QMAILQUEUE="bin/simscan" >> >> >> [simcontrol] >> >> xxx.xxx:clam=yes,spam=yes,spam_hits=10 >> :clam=no,spam=no >> >> >> [smtpd in qmail init file] >> >> ulimit -v 16384 >> sh -c "start-stop-daemon --start --quiet --user vpopmail \ >> --pidfile /var/run/tcpserver_smtpd.pid --make-pidfile \ >> --exec /usr/bin/tcpserver -- -v -R -H -c 100 \ >> -u `id -u vpopmail` \ >> -g `id -g vpopmail` \ >> -x /etc/tcp.smtp.cdb \ >> 0 smtp \ >> /var/qmail/bin/spamdyke --config-file /etc/spamdyke.conf \ >> /usr/sbin/qmail-smtpd \ >> /var/vpopmail/bin/vchkpw /bin/true 2>&1 \ >> | /usr/bin/setuidgid qmaill /usr/bin/multilog \ >> t n100 s500 /var/log/smtp &" >> >> >> Sending from my account to my account results in no scanning >> by spamassassin. Only mails not sending by me with smtp-auth >> are passed through spamassassin. >> >> Hope this helps :) >> >> cu, >> -harti >> >> On 12 Nov 08, Bernd Hoffmann wrote: >>> I know the site (http://qmail.jms1.net/simscan) and I >> patched simscan >>> with simscan-1.4.0-combined.4.patch. I also rebuild >> tcp.smtp.cdb and >>> simcontrol.cdb after any change of tcp.smtp and simcontrol. >>> >>> Here are the outpot of the logfile without spamdyke in qmailrunfile: >>> >>> simscan: calling clamdscan >>> simscan: cdb looking up version clamav >>> simscan: normal clamdscan return code: 0 >>> simscan: calling spamc >>> simscan: calling /usr/local/bin/spamc spamc -u EMAIL >>> simscan: cdb looking up version spam >>> simscan:[4160]:CLEAN >>> (-101.40/7.00):0.6086s:Testmail:10.10.0.3:EMAILFROM:EMAILTO >>> simscan: done, execing qmail-queue >>> simscan: qmail-queue exited 0 >>> >>> When I add spamdyke to my qmailrunfile, I get the following >> log entries: >>> simscan: calling clamdscan >>> simscan: cdb looking up version clamav >>> simscan: normal clamdscan return code: 0 >>> simscan:[4213]:RELAYCLIENT:0.0652s:-:10.10.0.3:EMAILFROM:EMAILTO >>> simscan: done, execing qmail-queue >>> simscan: qmail-queue exited 0 >>> >>> As you can see, spamc will not calling by simscan. >>> >>> Can you show me your tcp.smtp file and also your >>> qmail-smtpd-run-script, harti? >>> >>> Thanks in advance. >>> >>> Bernd >>> >>> >>>> I have no problem running spamdyke, simscan, clamav, f-prot and >>>> spamassassin. >>>> >>>> Are you sure you rebuild the cdb files after making changes? >>>> (tcp.smtp.cdb and simcontrol.cdb) >>>> >>>> You can enable simscan debugging by adding environmen variable in >>>> your /etc/tcp.smtp file: >>>> >>>> SIMSCAN_DEBUG=2 >>>> >>>> Maybe you are also interessted in a good site providing >> some patches >>>> for simscan (if you don't know it already:): >>>> >>>> http://qmail.jms1.net/simscan/ >>>> >>>> >>>> best, >>>> -harti >>>> >>>> On 11 Nov 08, [EMAIL PROTECTED] wrote: >>>>> thanks for your answers. >>>>> >>>>> first of all i would like to say, that simscan works also with >>>>> spamdyke, but when i add spamdyke to my run-script, simscan >>>> skip only spamassassin. >>>>> and i don't know the reason. >>>>> >>>>> My simscan-configuration looks like: >>>>> >>>>> ./configure \ >>>>> --enable-user=simscan \ >>>>> --enable-clamav=y \ >>>>> --enable-clamdscan=/usr/l
Re: [spamdyke-users] simscan, spamassassin and spamdyke
It doesn't work on my system and I don't understand why. :-( > -Ursprüngliche Nachricht- > Von: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Im Auftrag von > Hartmut Wernisch > Gesendet: Mittwoch, 12. November 2008 14:21 > An: spamdyke users > Betreff: Re: [spamdyke-users] simscan, spamassassin and spamdyke > > > Here my config files using spamassassin with simscan: > > [tcp.smtp] > > :allow,QMAILQUEUE="bin/simscan" > > > [simcontrol] > > xxx.xxx:clam=yes,spam=yes,spam_hits=10 > :clam=no,spam=no > > > [smtpd in qmail init file] > > ulimit -v 16384 > sh -c "start-stop-daemon --start --quiet --user vpopmail \ > --pidfile /var/run/tcpserver_smtpd.pid --make-pidfile \ > --exec /usr/bin/tcpserver -- -v -R -H -c 100 \ > -u `id -u vpopmail` \ > -g `id -g vpopmail` \ > -x /etc/tcp.smtp.cdb \ > 0 smtp \ > /var/qmail/bin/spamdyke --config-file /etc/spamdyke.conf \ > /usr/sbin/qmail-smtpd \ > /var/vpopmail/bin/vchkpw /bin/true 2>&1 \ > | /usr/bin/setuidgid qmaill /usr/bin/multilog \ > t n100 s500 /var/log/smtp &" > > > Sending from my account to my account results in no scanning > by spamassassin. Only mails not sending by me with smtp-auth > are passed through spamassassin. > > Hope this helps :) > > cu, > -harti > > On 12 Nov 08, Bernd Hoffmann wrote: > > I know the site (http://qmail.jms1.net/simscan) and I > patched simscan > > with simscan-1.4.0-combined.4.patch. I also rebuild > tcp.smtp.cdb and > > simcontrol.cdb after any change of tcp.smtp and simcontrol. > > > > Here are the outpot of the logfile without spamdyke in qmailrunfile: > > > > simscan: calling clamdscan > > simscan: cdb looking up version clamav > > simscan: normal clamdscan return code: 0 > > simscan: calling spamc > > simscan: calling /usr/local/bin/spamc spamc -u EMAIL > > simscan: cdb looking up version spam > > simscan:[4160]:CLEAN > > (-101.40/7.00):0.6086s:Testmail:10.10.0.3:EMAILFROM:EMAILTO > > simscan: done, execing qmail-queue > > simscan: qmail-queue exited 0 > > > > When I add spamdyke to my qmailrunfile, I get the following > log entries: > > > > simscan: calling clamdscan > > simscan: cdb looking up version clamav > > simscan: normal clamdscan return code: 0 > > simscan:[4213]:RELAYCLIENT:0.0652s:-:10.10.0.3:EMAILFROM:EMAILTO > > simscan: done, execing qmail-queue > > simscan: qmail-queue exited 0 > > > > As you can see, spamc will not calling by simscan. > > > > Can you show me your tcp.smtp file and also your > > qmail-smtpd-run-script, harti? > > > > Thanks in advance. > > > > Bernd > > > > > > > I have no problem running spamdyke, simscan, clamav, f-prot and > > > spamassassin. > > > > > > Are you sure you rebuild the cdb files after making changes? > > > (tcp.smtp.cdb and simcontrol.cdb) > > > > > > You can enable simscan debugging by adding environmen variable in > > > your /etc/tcp.smtp file: > > > > > > SIMSCAN_DEBUG=2 > > > > > > Maybe you are also interessted in a good site providing > some patches > > > for simscan (if you don't know it already:): > > > > > > http://qmail.jms1.net/simscan/ > > > > > > > > > best, > > > -harti > > > > > > On 11 Nov 08, [EMAIL PROTECTED] wrote: > > > > thanks for your answers. > > > > > > > > first of all i would like to say, that simscan works also with > > > > spamdyke, but when i add spamdyke to my run-script, simscan > > > skip only spamassassin. > > > > and i don't know the reason. > > > > > > > > My simscan-configuration looks like: > > > > > > > > ./configure \ > > > > --enable-user=simscan \ > > > > --enable-clamav=y \ > > > > --enable-clamdscan=/usr/local/bin/clamdscan \ > > > > --enable-custom-smtp-reject=n \ --enable-per-domain=y \ > > > > --enable-attach=y \ --enable-dropmsg=n \ --enable-spam=y \ > > > > --enable-spam-passthru=n \ --enable-spamc-user=y \ > > > > --enable-spam-hits=7 \ > > > > --enable-spamc=/usr/local/bin/spamc \ > --enable-qmaildir=/var/qmail > > > > \ --enable-workdir=/var/qmail/si
Re: [spamdyke-users] simscan, spamassassin and spamdyke
Here my config files using spamassassin with simscan: [tcp.smtp] :allow,QMAILQUEUE="bin/simscan" [simcontrol] xxx.xxx:clam=yes,spam=yes,spam_hits=10 :clam=no,spam=no [smtpd in qmail init file] ulimit -v 16384 sh -c "start-stop-daemon --start --quiet --user vpopmail \ --pidfile /var/run/tcpserver_smtpd.pid --make-pidfile \ --exec /usr/bin/tcpserver -- -v -R -H -c 100 \ -u `id -u vpopmail` \ -g `id -g vpopmail` \ -x /etc/tcp.smtp.cdb \ 0 smtp \ /var/qmail/bin/spamdyke --config-file /etc/spamdyke.conf \ /usr/sbin/qmail-smtpd \ /var/vpopmail/bin/vchkpw /bin/true 2>&1 \ | /usr/bin/setuidgid qmaill /usr/bin/multilog \ t n100 s500 /var/log/smtp &" Sending from my account to my account results in no scanning by spamassassin. Only mails not sending by me with smtp-auth are passed through spamassassin. Hope this helps :) cu, -harti On 12 Nov 08, Bernd Hoffmann wrote: > I know the site (http://qmail.jms1.net/simscan) and I patched simscan with > simscan-1.4.0-combined.4.patch. I also rebuild tcp.smtp.cdb and > simcontrol.cdb after any change of tcp.smtp and simcontrol. > > Here are the outpot of the logfile without spamdyke in qmailrunfile: > > simscan: calling clamdscan > simscan: cdb looking up version clamav > simscan: normal clamdscan return code: 0 > simscan: calling spamc > simscan: calling /usr/local/bin/spamc spamc -u EMAIL > simscan: cdb looking up version spam > simscan:[4160]:CLEAN > (-101.40/7.00):0.6086s:Testmail:10.10.0.3:EMAILFROM:EMAILTO > simscan: done, execing qmail-queue > simscan: qmail-queue exited 0 > > When I add spamdyke to my qmailrunfile, I get the following log entries: > > simscan: calling clamdscan > simscan: cdb looking up version clamav > simscan: normal clamdscan return code: 0 > simscan:[4213]:RELAYCLIENT:0.0652s:-:10.10.0.3:EMAILFROM:EMAILTO > simscan: done, execing qmail-queue > simscan: qmail-queue exited 0 > > As you can see, spamc will not calling by simscan. > > Can you show me your tcp.smtp file and also your qmail-smtpd-run-script, > harti? > > Thanks in advance. > > Bernd > > > > I have no problem running spamdyke, simscan, clamav, f-prot > > and spamassassin. > > > > Are you sure you rebuild the cdb files after making changes? > > (tcp.smtp.cdb and simcontrol.cdb) > > > > You can enable simscan debugging by adding environmen > > variable in your /etc/tcp.smtp file: > > > > SIMSCAN_DEBUG=2 > > > > Maybe you are also interessted in a good site providing some > > patches for simscan (if you don't know it already:): > > > > http://qmail.jms1.net/simscan/ > > > > > > best, > > -harti > > > > On 11 Nov 08, [EMAIL PROTECTED] wrote: > > > thanks for your answers. > > > > > > first of all i would like to say, that simscan works also with > > > spamdyke, but when i add spamdyke to my run-script, simscan > > skip only spamassassin. > > > and i don't know the reason. > > > > > > My simscan-configuration looks like: > > > > > > ./configure \ > > > --enable-user=simscan \ > > > --enable-clamav=y \ > > > --enable-clamdscan=/usr/local/bin/clamdscan \ > > > --enable-custom-smtp-reject=n \ --enable-per-domain=y \ > > > --enable-attach=y \ --enable-dropmsg=n \ --enable-spam=y \ > > > --enable-spam-passthru=n \ --enable-spamc-user=y \ > > > --enable-spam-hits=7 \ > > > --enable-spamc=/usr/local/bin/spamc \ > > > --enable-qmaildir=/var/qmail \ > > > --enable-workdir=/var/qmail/simscan \ > > > --enable-controldir=/var/qmail/control \ > > > --enable-quarantinedir=/var/qmail/quarantine \ > > > --enable-qmail-queue=/var/qmail/bin/qmail-queue \ > > > --enable-ripmime=/usr/local/bin/ripmime \ --enable-received=y \ > > > --enable-spamassassin-path=/usr/local/bin/spamassassin \ > > > --enable-clamavdb-path=/usr/local/share/clamav \ > > > --enable-sigtool-path=/usr/local/bin/sigtool \ --enable-regex=y > > > > > > My qmail-smtpd-run-script looks like: > > > > > > #!/bin/sh > > > > > > QMAILDUID=`id -u vpopmail` > > > NOFILESGID=`id -g vpopmail` > > > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > > > LOCAL=`head -1 /var/qmail/control/me` > > > if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" > > -o -z "$LOCAL" > > > ]; then > > > echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in echo > > > /var/qmail/supervise/qmail-smtpd/run > > > exit 1 > > > fi > > > if [ ! -f /var/qmail/control/rcpthosts ]; then echo "No > > > /var/qmail/control/rcpthosts!" > > > echo "Refusing to start SMTP listener because it'll create > > an open relay" > > > exit 1 > > > fi > > > exec /usr/local/bin/softlimit -m 1000 \ > /usr/local/bin/tcpserver > > > -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c "$MAXSMTPD" \ -u > > > "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ /usr/local/bin/spamdyke -f > > > /usr/local/etc/spamdyke.conf \ /var/qmail/bin/qmail-smtpd > > > /home/vpo
Re: [spamdyke-users] simscan, spamassassin and spamdyke
I know the site (http://qmail.jms1.net/simscan) and I patched simscan with simscan-1.4.0-combined.4.patch. I also rebuild tcp.smtp.cdb and simcontrol.cdb after any change of tcp.smtp and simcontrol. Here are the outpot of the logfile without spamdyke in qmailrunfile: simscan: calling clamdscan simscan: cdb looking up version clamav simscan: normal clamdscan return code: 0 simscan: calling spamc simscan: calling /usr/local/bin/spamc spamc -u EMAIL simscan: cdb looking up version spam simscan:[4160]:CLEAN (-101.40/7.00):0.6086s:Testmail:10.10.0.3:EMAILFROM:EMAILTO simscan: done, execing qmail-queue simscan: qmail-queue exited 0 When I add spamdyke to my qmailrunfile, I get the following log entries: simscan: calling clamdscan simscan: cdb looking up version clamav simscan: normal clamdscan return code: 0 simscan:[4213]:RELAYCLIENT:0.0652s:-:10.10.0.3:EMAILFROM:EMAILTO simscan: done, execing qmail-queue simscan: qmail-queue exited 0 As you can see, spamc will not calling by simscan. Can you show me your tcp.smtp file and also your qmail-smtpd-run-script, harti? Thanks in advance. Bernd > I have no problem running spamdyke, simscan, clamav, f-prot > and spamassassin. > > Are you sure you rebuild the cdb files after making changes? > (tcp.smtp.cdb and simcontrol.cdb) > > You can enable simscan debugging by adding environmen > variable in your /etc/tcp.smtp file: > > SIMSCAN_DEBUG=2 > > Maybe you are also interessted in a good site providing some > patches for simscan (if you don't know it already:): > > http://qmail.jms1.net/simscan/ > > > best, > -harti > > On 11 Nov 08, [EMAIL PROTECTED] wrote: > > thanks for your answers. > > > > first of all i would like to say, that simscan works also with > > spamdyke, but when i add spamdyke to my run-script, simscan > skip only spamassassin. > > and i don't know the reason. > > > > My simscan-configuration looks like: > > > > ./configure \ > > --enable-user=simscan \ > > --enable-clamav=y \ > > --enable-clamdscan=/usr/local/bin/clamdscan \ > > --enable-custom-smtp-reject=n \ --enable-per-domain=y \ > > --enable-attach=y \ --enable-dropmsg=n \ --enable-spam=y \ > > --enable-spam-passthru=n \ --enable-spamc-user=y \ > > --enable-spam-hits=7 \ > > --enable-spamc=/usr/local/bin/spamc \ > > --enable-qmaildir=/var/qmail \ > > --enable-workdir=/var/qmail/simscan \ > > --enable-controldir=/var/qmail/control \ > > --enable-quarantinedir=/var/qmail/quarantine \ > > --enable-qmail-queue=/var/qmail/bin/qmail-queue \ > > --enable-ripmime=/usr/local/bin/ripmime \ --enable-received=y \ > > --enable-spamassassin-path=/usr/local/bin/spamassassin \ > > --enable-clamavdb-path=/usr/local/share/clamav \ > > --enable-sigtool-path=/usr/local/bin/sigtool \ --enable-regex=y > > > > My qmail-smtpd-run-script looks like: > > > > #!/bin/sh > > > > QMAILDUID=`id -u vpopmail` > > NOFILESGID=`id -g vpopmail` > > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > > LOCAL=`head -1 /var/qmail/control/me` > > if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" > -o -z "$LOCAL" > > ]; then > > echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in echo > > /var/qmail/supervise/qmail-smtpd/run > > exit 1 > > fi > > if [ ! -f /var/qmail/control/rcpthosts ]; then echo "No > > /var/qmail/control/rcpthosts!" > > echo "Refusing to start SMTP listener because it'll create > an open relay" > > exit 1 > > fi > > exec /usr/local/bin/softlimit -m 1000 \ /usr/local/bin/tcpserver > > -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c "$MAXSMTPD" \ -u > > "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ /usr/local/bin/spamdyke -f > > /usr/local/etc/spamdyke.conf \ /var/qmail/bin/qmail-smtpd > > /home/vpopmail/bin/vchkpw /usr/bin/true 2>&1 > > > > As I said, i activate simscan by adding > > ":allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. > > > > My /var/qmail/control/simcontrol file looks like: > > > > :clam=yes,spam=yes,spam_hits=7 > > > > Don't hesitate if you need more infos ;-) > > > > > > > The qmail-toaster (http://qmailtoaster.org) implements these > > > together just fine, so it *is* possible. ;) > > > > > > As Sam said, with a little more info about your configuration I'm > > > expect we can help get you running properly. > > > > > > Sam Clippinger wrote: > > >> I'm not familiar enough with simscan to give any good > advice here, > > >> but spamdyke should work fine with simscan. The FAQ > only mentions > > >> qmail-scanner because that's what I use and it documents a small > > >> bug I found. > > >> > > >> Perhaps if you could post your "run" script and more information > > >> about your simscan configuration, someone here may be > able to help. > > >> > > >> -- Sam Clippinger > > >> > > >> Bernd Hoffmann wrote: > > >>> Hello, > > >>> > > >>> I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav > > >>> and spamassassin with simscan by add > > >>> :allow,QMAILQUEUE="/var/qmail/bin/simscan" > > >>> to my /etc/tcp.sm
Re: [spamdyke-users] simscan, spamassassin and spamdyke
Hi! I have no problem running spamdyke, simscan, clamav, f-prot and spamassassin. Are you sure you rebuild the cdb files after making changes? (tcp.smtp.cdb and simcontrol.cdb) You can enable simscan debugging by adding environmen variable in your /etc/tcp.smtp file: SIMSCAN_DEBUG=2 Maybe you are also interessted in a good site providing some patches for simscan (if you don't know it already:): http://qmail.jms1.net/simscan/ best, -harti On 11 Nov 08, [EMAIL PROTECTED] wrote: > thanks for your answers. > > first of all i would like to say, that simscan works also with spamdyke, > but when i add spamdyke to my run-script, simscan skip only spamassassin. > and i don't know the reason. > > My simscan-configuration looks like: > > ./configure \ > --enable-user=simscan \ > --enable-clamav=y \ > --enable-clamdscan=/usr/local/bin/clamdscan \ > --enable-custom-smtp-reject=n \ > --enable-per-domain=y \ > --enable-attach=y \ > --enable-dropmsg=n \ > --enable-spam=y \ > --enable-spam-passthru=n \ > --enable-spamc-user=y \ > --enable-spam-hits=7 \ > --enable-spamc=/usr/local/bin/spamc \ > --enable-qmaildir=/var/qmail \ > --enable-workdir=/var/qmail/simscan \ > --enable-controldir=/var/qmail/control \ > --enable-quarantinedir=/var/qmail/quarantine \ > --enable-qmail-queue=/var/qmail/bin/qmail-queue \ > --enable-ripmime=/usr/local/bin/ripmime \ > --enable-received=y \ > --enable-spamassassin-path=/usr/local/bin/spamassassin \ > --enable-clamavdb-path=/usr/local/share/clamav \ > --enable-sigtool-path=/usr/local/bin/sigtool \ > --enable-regex=y > > My qmail-smtpd-run-script looks like: > > #!/bin/sh > > QMAILDUID=`id -u vpopmail` > NOFILESGID=`id -g vpopmail` > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > LOCAL=`head -1 /var/qmail/control/me` > if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z "$LOCAL" > ]; then > echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in > echo /var/qmail/supervise/qmail-smtpd/run > exit 1 > fi > if [ ! -f /var/qmail/control/rcpthosts ]; then > echo "No /var/qmail/control/rcpthosts!" > echo "Refusing to start SMTP listener because it'll create an open relay" > exit 1 > fi > exec /usr/local/bin/softlimit -m 1000 \ > /usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c > "$MAXSMTPD" \ > -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ > /usr/local/bin/spamdyke -f /usr/local/etc/spamdyke.conf \ > /var/qmail/bin/qmail-smtpd /home/vpopmail/bin/vchkpw /usr/bin/true 2>&1 > > As I said, i activate simscan by adding > ":allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. > > My /var/qmail/control/simcontrol file looks like: > > :clam=yes,spam=yes,spam_hits=7 > > Don't hesitate if you need more infos ;-) > > > > The qmail-toaster (http://qmailtoaster.org) implements these together > > just fine, so it *is* possible. ;) > > > > As Sam said, with a little more info about your configuration I'm expect > > we can help get you running properly. > > > > Sam Clippinger wrote: > >> I'm not familiar enough with simscan to give any good advice here, but > >> spamdyke should work fine with simscan. The FAQ only mentions > >> qmail-scanner because that's what I use and it documents a small bug I > >> found. > >> > >> Perhaps if you could post your "run" script and more information about > >> your simscan configuration, someone here may be able to help. > >> > >> -- Sam Clippinger > >> > >> Bernd Hoffmann wrote: > >>> Hello, > >>> > >>> I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and > >>> spamassassin with simscan by add > >>> :allow,QMAILQUEUE="/var/qmail/bin/simscan" > >>> to my /etc/tcp.smtp. > >>> > >>> When I enable spamdyke by adding "/usr/local/bin/spamdyke -f > >>> /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan > >>> skip the > >>> spamassassin-scan. > >>> > >>> I don't want to use the qmail-scanner > >>> (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can not > >>> be > >>> the solution!? > >>> > >>> How can I encourage simscan to use spamassassin together with spamdyke? > >>> > >>> Can somebody explain me, what's the problem? > >>> > >>> Thanks in advance. > >>> > >>> Best regards, > >>> > >>> Bernd > >>> > >>> ___ > >>> spamdyke-users mailing list > >>> spamdyke-users@spamdyke.org > >>> http://www.spamdyke.org/mailman/listinfo/spamdyke-users > >>> > > > > > > -- > > -Eric 'shubes' > > > > ___ > > spamdyke-users mailing list > > spamdyke-users@spamdyke.org > > http://www.spamdyke.org/mailman/listinfo/spamdyke-users > > > > > > - > e-Mailservice powered by Internetagentur Schott > http://www.internetagentur-schott.de/ > ___ > spamdyke-users mailing list > spamdyke-users@spamdyke.org > http://www.spamdyke.org/mailman/listinfo/spamdyke-users > ___ spamdyke-u
Re: [spamdyke-users] simscan, spamassassin and spamdyke
I changed the value today to about 10 MB. The value was about 250 MB before. > I still don't know anything about simscan, but my first idea is to try > raising your "softlimit" number. It's currently set to 1000 (9.54 > MB), which might be too low for running spamdyke, ClamAV and > SpamAssassin at the same time. Try raising it to something silly (like > 100 MB), restarting qmail and testing SpamAssassin again. If that fixes > your problem, you can try lowering that number (slowly) to find a > reasonable limit. > > -- Sam Clippinger > > [EMAIL PROTECTED] wrote: >> thanks for your answers. >> >> first of all i would like to say, that simscan works also with spamdyke, >> but when i add spamdyke to my run-script, simscan skip only >> spamassassin. >> and i don't know the reason. >> >> My simscan-configuration looks like: >> >> ./configure \ >> --enable-user=simscan \ >> --enable-clamav=y \ >> --enable-clamdscan=/usr/local/bin/clamdscan \ >> --enable-custom-smtp-reject=n \ >> --enable-per-domain=y \ >> --enable-attach=y \ >> --enable-dropmsg=n \ >> --enable-spam=y \ >> --enable-spam-passthru=n \ >> --enable-spamc-user=y \ >> --enable-spam-hits=7 \ >> --enable-spamc=/usr/local/bin/spamc \ >> --enable-qmaildir=/var/qmail \ >> --enable-workdir=/var/qmail/simscan \ >> --enable-controldir=/var/qmail/control \ >> --enable-quarantinedir=/var/qmail/quarantine \ >> --enable-qmail-queue=/var/qmail/bin/qmail-queue \ >> --enable-ripmime=/usr/local/bin/ripmime \ >> --enable-received=y \ >> --enable-spamassassin-path=/usr/local/bin/spamassassin \ >> --enable-clamavdb-path=/usr/local/share/clamav \ >> --enable-sigtool-path=/usr/local/bin/sigtool \ >> --enable-regex=y >> >> My qmail-smtpd-run-script looks like: >> >> #!/bin/sh >> >> QMAILDUID=`id -u vpopmail` >> NOFILESGID=`id -g vpopmail` >> MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` >> LOCAL=`head -1 /var/qmail/control/me` >> if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z >> "$LOCAL" >> ]; then >> echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in >> echo /var/qmail/supervise/qmail-smtpd/run >> exit 1 >> fi >> if [ ! -f /var/qmail/control/rcpthosts ]; then >> echo "No /var/qmail/control/rcpthosts!" >> echo "Refusing to start SMTP listener because it'll create an open >> relay" >> exit 1 >> fi >> exec /usr/local/bin/softlimit -m 1000 \ >> /usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c >> "$MAXSMTPD" \ >> -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ >> /usr/local/bin/spamdyke -f /usr/local/etc/spamdyke.conf \ >> /var/qmail/bin/qmail-smtpd /home/vpopmail/bin/vchkpw /usr/bin/true 2>&1 >> >> As I said, i activate simscan by adding >> ":allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. >> >> My /var/qmail/control/simcontrol file looks like: >> >> :clam=yes,spam=yes,spam_hits=7 >> >> Don't hesitate if you need more infos ;-) >> >> >> >>> The qmail-toaster (http://qmailtoaster.org) implements these together >>> just fine, so it *is* possible. ;) >>> >>> As Sam said, with a little more info about your configuration I'm >>> expect >>> we can help get you running properly. >>> >>> Sam Clippinger wrote: >>> I'm not familiar enough with simscan to give any good advice here, but spamdyke should work fine with simscan. The FAQ only mentions qmail-scanner because that's what I use and it documents a small bug I found. Perhaps if you could post your "run" script and more information about your simscan configuration, someone here may be able to help. -- Sam Clippinger Bernd Hoffmann wrote: > Hello, > > I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and > spamassassin with simscan by add > :allow,QMAILQUEUE="/var/qmail/bin/simscan" > to my /etc/tcp.smtp. > > When I enable spamdyke by adding "/usr/local/bin/spamdyke -f > /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan > skip the > spamassassin-scan. > > I don't want to use the qmail-scanner > (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can > not > be > the solution!? > > How can I encourage simscan to use spamassassin together with > spamdyke? > > Can somebody explain me, what's the problem? > > Thanks in advance. > > Best regards, > > Bernd > > ___ > spamdyke-users mailing list > spamdyke-users@spamdyke.org > http://www.spamdyke.org/mailman/listinfo/spamdyke-users > > >>> -- >>> -Eric 'shubes' >>> >>> ___ >>> spamdyke-users mailing list >>> spamdyke-users@spamdyke.org >>> http://www.spamdyke.org/mailman/listinfo/spamdyke-users >>> >>> >> >> >> >> - >> e-Mailservice powered by Internetagentur Schott >> http://www.internetagentur-schott.de/ >> __
Re: [spamdyke-users] simscan, spamassassin and spamdyke
I still don't know anything about simscan, but my first idea is to try raising your "softlimit" number. It's currently set to 1000 (9.54 MB), which might be too low for running spamdyke, ClamAV and SpamAssassin at the same time. Try raising it to something silly (like 100 MB), restarting qmail and testing SpamAssassin again. If that fixes your problem, you can try lowering that number (slowly) to find a reasonable limit. -- Sam Clippinger [EMAIL PROTECTED] wrote: > thanks for your answers. > > first of all i would like to say, that simscan works also with spamdyke, > but when i add spamdyke to my run-script, simscan skip only spamassassin. > and i don't know the reason. > > My simscan-configuration looks like: > > ./configure \ > --enable-user=simscan \ > --enable-clamav=y \ > --enable-clamdscan=/usr/local/bin/clamdscan \ > --enable-custom-smtp-reject=n \ > --enable-per-domain=y \ > --enable-attach=y \ > --enable-dropmsg=n \ > --enable-spam=y \ > --enable-spam-passthru=n \ > --enable-spamc-user=y \ > --enable-spam-hits=7 \ > --enable-spamc=/usr/local/bin/spamc \ > --enable-qmaildir=/var/qmail \ > --enable-workdir=/var/qmail/simscan \ > --enable-controldir=/var/qmail/control \ > --enable-quarantinedir=/var/qmail/quarantine \ > --enable-qmail-queue=/var/qmail/bin/qmail-queue \ > --enable-ripmime=/usr/local/bin/ripmime \ > --enable-received=y \ > --enable-spamassassin-path=/usr/local/bin/spamassassin \ > --enable-clamavdb-path=/usr/local/share/clamav \ > --enable-sigtool-path=/usr/local/bin/sigtool \ > --enable-regex=y > > My qmail-smtpd-run-script looks like: > > #!/bin/sh > > QMAILDUID=`id -u vpopmail` > NOFILESGID=`id -g vpopmail` > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > LOCAL=`head -1 /var/qmail/control/me` > if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z "$LOCAL" > ]; then > echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in > echo /var/qmail/supervise/qmail-smtpd/run > exit 1 > fi > if [ ! -f /var/qmail/control/rcpthosts ]; then > echo "No /var/qmail/control/rcpthosts!" > echo "Refusing to start SMTP listener because it'll create an open relay" > exit 1 > fi > exec /usr/local/bin/softlimit -m 1000 \ > /usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c > "$MAXSMTPD" \ > -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ > /usr/local/bin/spamdyke -f /usr/local/etc/spamdyke.conf \ > /var/qmail/bin/qmail-smtpd /home/vpopmail/bin/vchkpw /usr/bin/true 2>&1 > > As I said, i activate simscan by adding > ":allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. > > My /var/qmail/control/simcontrol file looks like: > > :clam=yes,spam=yes,spam_hits=7 > > Don't hesitate if you need more infos ;-) > > > >> The qmail-toaster (http://qmailtoaster.org) implements these together >> just fine, so it *is* possible. ;) >> >> As Sam said, with a little more info about your configuration I'm expect >> we can help get you running properly. >> >> Sam Clippinger wrote: >> >>> I'm not familiar enough with simscan to give any good advice here, but >>> spamdyke should work fine with simscan. The FAQ only mentions >>> qmail-scanner because that's what I use and it documents a small bug I >>> found. >>> >>> Perhaps if you could post your "run" script and more information about >>> your simscan configuration, someone here may be able to help. >>> >>> -- Sam Clippinger >>> >>> Bernd Hoffmann wrote: >>> Hello, I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and spamassassin with simscan by add :allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. When I enable spamdyke by adding "/usr/local/bin/spamdyke -f /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan skip the spamassassin-scan. I don't want to use the qmail-scanner (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can not be the solution!? How can I encourage simscan to use spamassassin together with spamdyke? Can somebody explain me, what's the problem? Thanks in advance. Best regards, Bernd ___ spamdyke-users mailing list spamdyke-users@spamdyke.org http://www.spamdyke.org/mailman/listinfo/spamdyke-users >> -- >> -Eric 'shubes' >> >> ___ >> spamdyke-users mailing list >> spamdyke-users@spamdyke.org >> http://www.spamdyke.org/mailman/listinfo/spamdyke-users >> >> > > > > - > e-Mailservice powered by Internetagentur Schott > http://www.internetagentur-schott.de/ > ___ > spamdyke-users mailing list > spamdyke-users@spamdyke.org > http://www.spamdyke.org/mailman/listinfo/spamdyke-users > ___ spamdyke-users mailing list spamdyke-users@spamdyke.or
Re: [spamdyke-users] simscan, spamassassin and spamdyke
thanks for your answers. first of all i would like to say, that simscan works also with spamdyke, but when i add spamdyke to my run-script, simscan skip only spamassassin. and i don't know the reason. My simscan-configuration looks like: ./configure \ --enable-user=simscan \ --enable-clamav=y \ --enable-clamdscan=/usr/local/bin/clamdscan \ --enable-custom-smtp-reject=n \ --enable-per-domain=y \ --enable-attach=y \ --enable-dropmsg=n \ --enable-spam=y \ --enable-spam-passthru=n \ --enable-spamc-user=y \ --enable-spam-hits=7 \ --enable-spamc=/usr/local/bin/spamc \ --enable-qmaildir=/var/qmail \ --enable-workdir=/var/qmail/simscan \ --enable-controldir=/var/qmail/control \ --enable-quarantinedir=/var/qmail/quarantine \ --enable-qmail-queue=/var/qmail/bin/qmail-queue \ --enable-ripmime=/usr/local/bin/ripmime \ --enable-received=y \ --enable-spamassassin-path=/usr/local/bin/spamassassin \ --enable-clamavdb-path=/usr/local/share/clamav \ --enable-sigtool-path=/usr/local/bin/sigtool \ --enable-regex=y My qmail-smtpd-run-script looks like: #!/bin/sh QMAILDUID=`id -u vpopmail` NOFILESGID=`id -g vpopmail` MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` LOCAL=`head -1 /var/qmail/control/me` if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z "$LOCAL" ]; then echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in echo /var/qmail/supervise/qmail-smtpd/run exit 1 fi if [ ! -f /var/qmail/control/rcpthosts ]; then echo "No /var/qmail/control/rcpthosts!" echo "Refusing to start SMTP listener because it'll create an open relay" exit 1 fi exec /usr/local/bin/softlimit -m 1000 \ /usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c "$MAXSMTPD" \ -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ /usr/local/bin/spamdyke -f /usr/local/etc/spamdyke.conf \ /var/qmail/bin/qmail-smtpd /home/vpopmail/bin/vchkpw /usr/bin/true 2>&1 As I said, i activate simscan by adding ":allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. My /var/qmail/control/simcontrol file looks like: :clam=yes,spam=yes,spam_hits=7 Don't hesitate if you need more infos ;-) > The qmail-toaster (http://qmailtoaster.org) implements these together > just fine, so it *is* possible. ;) > > As Sam said, with a little more info about your configuration I'm expect > we can help get you running properly. > > Sam Clippinger wrote: >> I'm not familiar enough with simscan to give any good advice here, but >> spamdyke should work fine with simscan. The FAQ only mentions >> qmail-scanner because that's what I use and it documents a small bug I >> found. >> >> Perhaps if you could post your "run" script and more information about >> your simscan configuration, someone here may be able to help. >> >> -- Sam Clippinger >> >> Bernd Hoffmann wrote: >>> Hello, >>> >>> I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and >>> spamassassin with simscan by add >>> :allow,QMAILQUEUE="/var/qmail/bin/simscan" >>> to my /etc/tcp.smtp. >>> >>> When I enable spamdyke by adding "/usr/local/bin/spamdyke -f >>> /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan >>> skip the >>> spamassassin-scan. >>> >>> I don't want to use the qmail-scanner >>> (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can not >>> be >>> the solution!? >>> >>> How can I encourage simscan to use spamassassin together with spamdyke? >>> >>> Can somebody explain me, what's the problem? >>> >>> Thanks in advance. >>> >>> Best regards, >>> >>> Bernd >>> >>> ___ >>> spamdyke-users mailing list >>> spamdyke-users@spamdyke.org >>> http://www.spamdyke.org/mailman/listinfo/spamdyke-users >>> > > > -- > -Eric 'shubes' > > ___ > spamdyke-users mailing list > spamdyke-users@spamdyke.org > http://www.spamdyke.org/mailman/listinfo/spamdyke-users > - e-Mailservice powered by Internetagentur Schott http://www.internetagentur-schott.de/ ___ spamdyke-users mailing list spamdyke-users@spamdyke.org http://www.spamdyke.org/mailman/listinfo/spamdyke-users
Re: [spamdyke-users] simscan, spamassassin and spamdyke
The qmail-toaster (http://qmailtoaster.org) implements these together just fine, so it *is* possible. ;) As Sam said, with a little more info about your configuration I'm expect we can help get you running properly. Sam Clippinger wrote: > I'm not familiar enough with simscan to give any good advice here, but > spamdyke should work fine with simscan. The FAQ only mentions > qmail-scanner because that's what I use and it documents a small bug I > found. > > Perhaps if you could post your "run" script and more information about > your simscan configuration, someone here may be able to help. > > -- Sam Clippinger > > Bernd Hoffmann wrote: >> Hello, >> >> I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and >> spamassassin with simscan by add :allow,QMAILQUEUE="/var/qmail/bin/simscan" >> to my /etc/tcp.smtp. >> >> When I enable spamdyke by adding "/usr/local/bin/spamdyke -f >> /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan skip the >> spamassassin-scan. >> >> I don't want to use the qmail-scanner >> (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can not be >> the solution!? >> >> How can I encourage simscan to use spamassassin together with spamdyke? >> >> Can somebody explain me, what's the problem? >> >> Thanks in advance. >> >> Best regards, >> >> Bernd >> >> ___ >> spamdyke-users mailing list >> spamdyke-users@spamdyke.org >> http://www.spamdyke.org/mailman/listinfo/spamdyke-users >> -- -Eric 'shubes' ___ spamdyke-users mailing list spamdyke-users@spamdyke.org http://www.spamdyke.org/mailman/listinfo/spamdyke-users
Re: [spamdyke-users] simscan, spamassassin and spamdyke
I'm not familiar enough with simscan to give any good advice here, but spamdyke should work fine with simscan. The FAQ only mentions qmail-scanner because that's what I use and it documents a small bug I found. Perhaps if you could post your "run" script and more information about your simscan configuration, someone here may be able to help. -- Sam Clippinger Bernd Hoffmann wrote: > Hello, > > I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and > spamassassin with simscan by add :allow,QMAILQUEUE="/var/qmail/bin/simscan" > to my /etc/tcp.smtp. > > When I enable spamdyke by adding "/usr/local/bin/spamdyke -f > /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan skip the > spamassassin-scan. > > I don't want to use the qmail-scanner > (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can not be > the solution!? > > How can I encourage simscan to use spamassassin together with spamdyke? > > Can somebody explain me, what's the problem? > > Thanks in advance. > > Best regards, > > Bernd > > ___ > spamdyke-users mailing list > spamdyke-users@spamdyke.org > http://www.spamdyke.org/mailman/listinfo/spamdyke-users > ___ spamdyke-users mailing list spamdyke-users@spamdyke.org http://www.spamdyke.org/mailman/listinfo/spamdyke-users
[spamdyke-users] simscan, spamassassin and spamdyke
Hello, I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and spamassassin with simscan by add :allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. When I enable spamdyke by adding "/usr/local/bin/spamdyke -f /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan skip the spamassassin-scan. I don't want to use the qmail-scanner (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can not be the solution!? How can I encourage simscan to use spamassassin together with spamdyke? Can somebody explain me, what's the problem? Thanks in advance. Best regards, Bernd ___ spamdyke-users mailing list spamdyke-users@spamdyke.org http://www.spamdyke.org/mailman/listinfo/spamdyke-users
