RE: [spctools-discuss] why I got this error information?
Hi Jimmy, thank you for your advice. I followed your advice and test the files one by one and figured out one raw file name is different from the sequest search file name (my colleague renamed the sequest search result file name). After I renamed the raw file name to match the sequest results name. then the analyze peptide went through without any problem. The new problem is: when I click the peptide to check the xpress ratio infomration or ms/ms informatin, there is error information showed below. Could you give me some advice for this error information? Thank you so much and have a nice weekend Eileen for ms/ms information erro: command c:\Inetpub\wwwroot\..\tpp-bin\tar.exe -tzf c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_1 4-D_100ug_PierceIMAC_75um_140_20130423_VE2.tgz *MAY1335_Yeast_1 4-D_100ug_PierceIMAC_75um_140_20130423_VE2.22310.22310.3.dta /dev/null failed: Operation not permitted Error - cannot read spectrum; tried direct .dta, from mzXML/mzData and from .tgz for xpress information error: Light scans: mass: tol: Heavy scans: mass: Z: Raw file: .out file: Norm: Error - cannot open file c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_1. From: spctools-discuss@googlegroups.com [spctools-discuss@googlegroups.com] On Behalf Of Jimmy Eng [jke...@gmail.com] Sent: Thursday, May 02, 2013 9:16 AM To: spctools-discuss@googlegroups.com Subject: Re: [spctools-discuss] why I got this error information? Eileen, The + in the file names is not a problem at this stage of processing although it is a reserved character for a URL so you will have issues visualizing results in the web interface. The - character is OK. For future reference, it's not enough to simply change the pep.xml and mzML file names. You will have to also make the corresponding changes to the content within the pep.xml file, specifically the base_name attributes. I always suggest that researchers stick to numbers, letters, dash -, and underscore _ in naming files. For your specific error, does the following file exist? c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML If yes, I couldn't tell you why XPRESS is reporting that error. I would suggest you try this analysis with just a single input file first to confirm you can run the tools to completion. If that works, try this processing this one MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML file by itself. - Jimmy On Wed, May 1, 2013 at 1:27 PM, Eileen Yue y...@ohsu.edumailto:y...@ohsu.edu wrote: Hello everyone. I have one error information when I tried to analyze peptide for SILAC data. I do not know whether this is possibly caused by file's name which includes + and - . I did manually change the pep.xml and mzml files's name (which I deleted + and - ) but I still get error information. Could anyone give me some advice about this issue? Thanks Eileen XPRESS error - cannot open file from basename c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2, will try to derive from scan names command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 failed: Unknown error command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 exited with non-zero exit code: -1073741819 QUIT - the job is incomplete command c:\Inetpub\tpp-bin\xinteract -Ninteract.pep.xml -p0.75 -l6 -Op -dREV -X-m1-nK,8-nR,10-c6-p1 -A-lKR-r0.5 MAY1335_Yeast_1+4-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_PierceIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml failed: Unknown error Command FAILED -- You received this message because you are subscribed to the Google Groups spctools-discuss group. To unsubscribe from this group and stop receiving emails from it, send an email to spctools-discuss+unsubscr...@googlegroups.commailto:spctools-discuss%2bunsubscr...@googlegroups.com. To post to this group, send email to spctools-discuss@googlegroups.commailto:spctools-discuss@googlegroups.com. Visit this group at http://groups.google.com/group/spctools-discuss?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups spctools-discuss group. To unsubscribe from this group and stop receiving emails from it, send an email to spctools-discuss+unsubscr...@googlegroups.com. To post to this group, send
Re: [spctools-discuss] why I got this error information?
Eileen, Any chance you have a + in your file name? If yes, that is your problem. And based on your error message you pasted, this looks like the case. If you re-named your pep.xml and mzML files, you will also have to change all references *inside* the pep.xml file to the updated name which I mentioned in my previous reply. To avoid all these issues with mis-naming files and not correctly updating file names content inside the pep.xml files, consider starting from the beginning with a re-named mzML file, do the search to generate a pep.xml file and then run the TPP tools. - Jimmy On Fri, May 3, 2013 at 3:49 PM, Eileen Yue y...@ohsu.edu wrote: Hi Jimmy, thank you for your advice. I followed your advice and test the files one by one and figured out one raw file name is different from the sequest search file name (my colleague renamed the sequest search result file name). After I renamed the raw file name to match the sequest results name. then the analyze peptide went through without any problem. The new problem is: when I click the peptide to check the xpress ratio infomration or ms/ms informatin, there is error information showed below. Could you give me some advice for this error information? Thank you so much and have a nice weekend Eileen for ms/ms information erro: command c:\Inetpub\wwwroot\..\tpp-bin\tar.exe -tzf c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_1 4-D_100ug_PierceIMAC_75um_140_20130423_VE2.tgz *MAY1335_Yeast_1 4-D_100ug_PierceIMAC_75um_140_20130423_VE2.22310.22310.3.dta /dev/null failed: Operation not permitted Error - cannot read spectrum; tried direct .dta, from mzXML/mzData and from .tgz for xpress information error: Light scans: mass: tol: Heavy scans: mass: Z: Raw file: .out file: Norm: Error - cannot open file c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_1. From: spctools-discuss@googlegroups.com [spctools-discuss@googlegroups.com] On Behalf Of Jimmy Eng [jke...@gmail.com] Sent: Thursday, May 02, 2013 9:16 AM To: spctools-discuss@googlegroups.com Subject: Re: [spctools-discuss] why I got this error information? Eileen, The + in the file names is not a problem at this stage of processing although it is a reserved character for a URL so you will have issues visualizing results in the web interface. The - character is OK. For future reference, it's not enough to simply change the pep.xml and mzML file names. You will have to also make the corresponding changes to the content within the pep.xml file, specifically the base_name attributes. I always suggest that researchers stick to numbers, letters, dash -, and underscore _ in naming files. For your specific error, does the following file exist? c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML If yes, I couldn't tell you why XPRESS is reporting that error. I would suggest you try this analysis with just a single input file first to confirm you can run the tools to completion. If that works, try this processing this one MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML file by itself. - Jimmy On Wed, May 1, 2013 at 1:27 PM, Eileen Yue y...@ohsu.edumailto: y...@ohsu.edu wrote: Hello everyone. I have one error information when I tried to analyze peptide for SILAC data. I do not know whether this is possibly caused by file's name which includes + and - . I did manually change the pep.xml and mzml files's name (which I deleted + and - ) but I still get error information. Could anyone give me some advice about this issue? Thanks Eileen XPRESS error - cannot open file from basename c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2, will try to derive from scan names command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 failed: Unknown error command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 exited with non-zero exit code: -1073741819 QUIT - the job is incomplete command c:\Inetpub\tpp-bin\xinteract -Ninteract.pep.xml -p0.75 -l6 -Op -dREV -X-m1-nK,8-nR,10-c6-p1 -A-lKR-r0.5 MAY1335_Yeast_1+4-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_PierceIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml failed: Unknown error Command FAILED -- You received this message because you are subscribed to the Google Groups spctools-discuss group. To unsubscribe
RE: [spctools-discuss] why I got this error information?
Jimmy, You are right. I do have + in my file name. I need rename the raw file name and redo the Sequest search first, then I will load on TPP to switch to MZML and pep. Xml file. Thank you so much for your kind help Eileen From: spctools-discuss@googlegroups.com [mailto:spctools-discuss@googlegroups.com] On Behalf Of Jimmy Eng Sent: Friday, May 03, 2013 4:00 PM To: spctools-discuss@googlegroups.com Subject: Re: [spctools-discuss] why I got this error information? Eileen, Any chance you have a + in your file name? If yes, that is your problem. And based on your error message you pasted, this looks like the case. If you re-named your pep.xml and mzML files, you will also have to change all references *inside* the pep.xml file to the updated name which I mentioned in my previous reply. To avoid all these issues with mis-naming files and not correctly updating file names content inside the pep.xml files, consider starting from the beginning with a re-named mzML file, do the search to generate a pep.xml file and then run the TPP tools. - Jimmy On Fri, May 3, 2013 at 3:49 PM, Eileen Yue y...@ohsu.edumailto:y...@ohsu.edu wrote: Hi Jimmy, thank you for your advice. I followed your advice and test the files one by one and figured out one raw file name is different from the sequest search file name (my colleague renamed the sequest search result file name). After I renamed the raw file name to match the sequest results name. then the analyze peptide went through without any problem. The new problem is: when I click the peptide to check the xpress ratio infomration or ms/ms informatin, there is error information showed below. Could you give me some advice for this error information? Thank you so much and have a nice weekend Eileen for ms/ms information erro: command c:\Inetpub\wwwroot\..\tpp-bin\tar.exe -tzf c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_1 4-D_100ug_PierceIMAC_75um_140_20130423_VE2.tgz *MAY1335_Yeast_1 4-D_100ug_PierceIMAC_75um_140_20130423_VE2.22310.22310.3.dta /dev/null failed: Operation not permitted Error - cannot read spectrum; tried direct .dta, from mzXML/mzData and from .tgz for xpress information error: Light scans: mass: tol: Heavy scans: mass: Z: Raw file: .out file: Norm: Error - cannot open file c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_1. From: spctools-discuss@googlegroups.commailto:spctools-discuss@googlegroups.com [spctools-discuss@googlegroups.commailto:spctools-discuss@googlegroups.com] On Behalf Of Jimmy Eng [jke...@gmail.commailto:jke...@gmail.com] Sent: Thursday, May 02, 2013 9:16 AM To: spctools-discuss@googlegroups.commailto:spctools-discuss@googlegroups.com Subject: Re: [spctools-discuss] why I got this error information? Eileen, The + in the file names is not a problem at this stage of processing although it is a reserved character for a URL so you will have issues visualizing results in the web interface. The - character is OK. For future reference, it's not enough to simply change the pep.xml and mzML file names. You will have to also make the corresponding changes to the content within the pep.xml file, specifically the base_name attributes. I always suggest that researchers stick to numbers, letters, dash -, and underscore _ in naming files. For your specific error, does the following file exist? c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML If yes, I couldn't tell you why XPRESS is reporting that error. I would suggest you try this analysis with just a single input file first to confirm you can run the tools to completion. If that works, try this processing this one MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML file by itself. - Jimmy On Wed, May 1, 2013 at 1:27 PM, Eileen Yue y...@ohsu.edumailto:y...@ohsu.edumailto:y...@ohsu.edumailto:y...@ohsu.edu wrote: Hello everyone. I have one error information when I tried to analyze peptide for SILAC data. I do not know whether this is possibly caused by file's name which includes + and - . I did manually change the pep.xml and mzml files's name (which I deleted + and - ) but I still get error information. Could anyone give me some advice about this issue? Thanks Eileen XPRESS error - cannot open file from basename c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2, will try to derive from scan names command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 failed: Unknown error command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 exited with non-zero exit code: -1073741819 QUIT - the job is incomplete command c
Re: [spctools-discuss] why I got this error information?
Eileen, The + in the file names is not a problem at this stage of processing although it is a reserved character for a URL so you will have issues visualizing results in the web interface. The - character is OK. For future reference, it's not enough to simply change the pep.xml and mzML file names. You will have to also make the corresponding changes to the content within the pep.xml file, specifically the base_name attributes. I always suggest that researchers stick to numbers, letters, dash -, and underscore _ in naming files. For your specific error, does the following file exist? c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/ MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML If yes, I couldn't tell you why XPRESS is reporting that error. I would suggest you try this analysis with just a single input file first to confirm you can run the tools to completion. If that works, try this processing this one MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.mzML file by itself. - Jimmy On Wed, May 1, 2013 at 1:27 PM, Eileen Yue y...@ohsu.edu wrote: Hello everyone. I have one error information when I tried to analyze peptide for SILAC data. I do not know whether this is possibly caused by file's name which includes + and - . I did manually change the pep.xml and mzml files's name (which I deleted + and - ) but I still get error information. Could anyone give me some advice about this issue? Thanks Eileen XPRESS error - cannot open file from basename c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2, will try to derive from scan names command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 failed: Unknown error command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 exited with non-zero exit code: -1073741819 QUIT - the job is incomplete command c:\Inetpub\tpp-bin\xinteract -Ninteract.pep.xml -p0.75 -l6 -Op -dREV -X-m1-nK,8-nR,10-c6-p1 -A-lKR-r0.5 MAY1335_Yeast_1+4-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_PierceIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml failed: Unknown error Command FAILED -- You received this message because you are subscribed to the Google Groups spctools-discuss group. To unsubscribe from this group and stop receiving emails from it, send an email to spctools-discuss+unsubscr...@googlegroups.com. To post to this group, send email to spctools-discuss@googlegroups.com. Visit this group at http://groups.google.com/group/spctools-discuss?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups spctools-discuss group. To unsubscribe from this group and stop receiving emails from it, send an email to spctools-discuss+unsubscr...@googlegroups.com. To post to this group, send email to spctools-discuss@googlegroups.com. Visit this group at http://groups.google.com/group/spctools-discuss?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
[spctools-discuss] why I got this error information?
Hello everyone. I have one error information when I tried to analyze peptide for SILAC data. I do not know whether this is possibly caused by file's name which includes + and - . I did manually change the pep.xml and mzml files's name (which I deleted + and - ) but I still get error information. Could anyone give me some advice about this issue? Thanks Eileen XPRESS error - cannot open file from basename c:/Inetpub/wwwroot/ISB/data/MAY1335_Phosphopeptides/MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2, will try to derive from scan names command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 failed: Unknown error command C:/Inetpub/tpp-bin/XPressPeptideParser interact.pep.xml -m1 -nK,8 -nR,10 -c6 -p1 exited with non-zero exit code: -1073741819 QUIT - the job is incomplete command c:\Inetpub\tpp-bin\xinteract -Ninteract.pep.xml -p0.75 -l6 -Op -dREV -X-m1-nK,8-nR,10-c6-p1 -A-lKR-r0.5 MAY1335_Yeast_1+4-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_1+4-D_100ug_PierceIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_IMAC_75um_140_20130410_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_PIMAC_75um_140_20130423_VE2.pep.xml MAY1335_Yeast_2+3-D_100ug_POLY-Ti_75um_140_20130410_VE2.pep.xml failed: Unknown error Command FAILED -- You received this message because you are subscribed to the Google Groups spctools-discuss group. To unsubscribe from this group and stop receiving emails from it, send an email to spctools-discuss+unsubscr...@googlegroups.com. To post to this group, send email to spctools-discuss@googlegroups.com. Visit this group at http://groups.google.com/group/spctools-discuss?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
