Re: [squid-users] very slow browsing and page is not displaed properly
abdul sami wrote: Thank you heaps for reply. I have revisited the squid.conf and have make necessary changes. I would try to revise the RAID too. About size of the Cache, pls let me know how much size could be the best for performance. Unknown. A few days to a week worth of your networks cacheable HTTP traffic. Or as much as you can give Squid. On Fri, May 21, 2010 at 1:44 PM, Amos Jeffries <mailto:squ...@treenet.co.nz>> wrote: goody goody wrote: Hi, Squid GURUs, Your response is required, please. Regards, .Goody. - Original Message From: goody goody mailto:think...@yahoo.com>> To: squid-users@squid-cache.org <mailto:squid-users@squid-cache.org> Sent: Fri, May 21, 2010 1:52:23 AM Subject: Re: [squid-users] very slow browsing and page is not displaed properly Dear Members, In addition to below information, I have added some more info regarding machine hardware and platform. RAM = 4 GB Processors = 4 HDDs SATA having implemented RAID-5 Running on VMWARE ESXi 3.5. Should you need any info, pls let me know. Waiting for your expert opinion, please. http://wiki.squid-cache.org/SquidFaq/RAID 45GB cache on RAID-5. ouch. If you are really absolutely forced to use RAID at all, go for RAID-1. For best performance go with JBOD and do away with half the physical level IO. I'd also recommend an OS other than *BSD for AUFS. There are some write problems on BSD that apparently slow it down. My refresh pattern settings are as below, pls also have a look on them too, refresh_pattern ^ftp: 144020% 10080 refresh_pattern ^gopher:14400% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 refresh_pattern -i downloads99 99% 60 override-expire override-lastmod Best Regards, .Goody. Place your own refresh_patterns above the list of defaults. Squid will always stop processing at the default "." pattern which matches EVERYTHING in existence and prevents any of your own rules which follow it from ever being used. Amos -- Please be using Current Stable Squid 2.7.STABLE9 or 3.1.3
Re: [squid-users] very slow browsing and page is not displaed properly
goody goody wrote: Hi, Squid GURUs, Your response is required, please. Regards, .Goody. - Original Message From: goody goody To: squid-users@squid-cache.org Sent: Fri, May 21, 2010 1:52:23 AM Subject: Re: [squid-users] very slow browsing and page is not displaed properly Dear Members, In addition to below information, I have added some more info regarding machine hardware and platform. RAM = 4 GB Processors = 4 HDDs SATA having implemented RAID-5 Running on VMWARE ESXi 3.5. Should you need any info, pls let me know. Waiting for your expert opinion, please. http://wiki.squid-cache.org/SquidFaq/RAID 45GB cache on RAID-5. ouch. If you are really absolutely forced to use RAID at all, go for RAID-1. For best performance go with JBOD and do away with half the physical level IO. I'd also recommend an OS other than *BSD for AUFS. There are some write problems on BSD that apparently slow it down. - Original Message From: goody goody To: squid-users@squid-cache.org Sent: Thu, May 20, 2010 4:31:21 PM Subject: [squid-users] very slow browsing and page is not displaed properly Hi, Version information and some statistics collected by me are as below. At times, my users complain the browsing becomes deadly slow and we page like yahoo, after much delay is displayed scattered and pictures are not visible rather "X" sign is displayed and after few times refresh screen becomes better. proxy-br# uname -a FreeBSD proxy-br 0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 proxy-br# /usr/local/squid27/sbin/squid -v Squid Cache: Version 2.7.STABLE9 configure options: '--prefix=/usr/local/squid27' '--enable-async-io' '-enable-storeio=aufs,coss' '--enable-removal-policies=heap,lru' '--enable-snmp' '--with-openssl=/opt/ssl' '--enable-wccp' proxy-br# iostat -c 5 -w 3 ttyda0pass0cpu tin tout KB/t tps MB/s KB/t tps MB/s us ni sy in id 0 138 13.88 2 0.03 0.00 0 0.00 4 0 1 0 95 0 140 11.00 1 0.01 0.00 0 0.00 11 0 5 1 83 0 133 11.00 1 0.01 0.00 0 0.00 16 0 5 1 78 086 16.00 0 0.01 0.00 0 0.00 13 0 4 1 82 0 132 3.07 5 0.01 0.00 0 0.00 14 0 4 1 80 proxy-br# vmstat procs memory pagedisksfaultscpu r b wavmfre flt re pi pofr sr da0 pa0 in sy cs us sy id 1 0 0924M 154M20 0 0 06 1 0 0 189 1178 1366 4 1 95 proxy-br# systat /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average || /0% /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 root idle XX root idle X squidsquid X rootkernel X my squid.conf is as below http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? no_cache deny QUERY "no_cache" is dead. Drop the "no_" part of it. Also the QUERY acl is now deprecated. You can drop those above lines entirely and add a refresh_pattern instead: refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 (needs to go just about the "refresh_pattern . " line). cache_mem 256 MB visible_hostname pxy #negative_ttl 0 acl PURGE method PURGE acl localhost src 127.0.0.1 http_access allow PURGE localhost http_access deny PURGE cache_replacement_policy heap LFUDA memory_replacement_policy heap GDSF cache_dir aufs /cache 45000 16 256 cache_store_log /dev/null #/var/log/squid27/store.log Drop the line above. It's both broken syntax (there are no comments allowed at the end), and unused as the next line below erases it. cache_store_log none cache_swap_low 80 cache_swap_high 90 cache_log /var/log/squid27/cache.log cache_access_log /var/log/squid27/access.log half_closed_clients off ... ...acl... . #always_direct allow myiplist cache_mgr x...@ cache_effective_user squid cache_effective_group squid logfile_rotate 0 buffered_logs on nonhierarchical_direct off prefer_direct off ie_refresh on ftp_list_width 32 ftp_passive on ftp_sanitycheck on ftp_telnet_protocol on emulate_httpd_log on Use the "common" log fo
Re: [squid-users] very slow browsing and page is not displaed properly
Hi, Squid GURUs, Your response is required, please. Regards, .Goody. - Original Message From: goody goody To: squid-users@squid-cache.org Sent: Fri, May 21, 2010 1:52:23 AM Subject: Re: [squid-users] very slow browsing and page is not displaed properly Dear Members, In addition to below information, I have added some more info regarding machine hardware and platform. RAM = 4 GB Processors = 4 HDDs SATA having implemented RAID-5 Running on VMWARE ESXi 3.5. Should you need any info, pls let me know. Waiting for your expert opinion, please. Warm Regards, .goody. - Original Message From: goody goody To: squid-users@squid-cache.org Sent: Thu, May 20, 2010 4:31:21 PM Subject: [squid-users] very slow browsing and page is not displaed properly Hi, Version information and some statistics collected by me are as below. At times, my users complain the browsing becomes deadly slow and we page like yahoo, after much delay is displayed scattered and pictures are not visible rather "X" sign is displayed and after few times refresh screen becomes better. proxy-br# uname -a FreeBSD proxy-br 0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 proxy-br# /usr/local/squid27/sbin/squid -v Squid Cache: Version 2.7.STABLE9 configure options: '--prefix=/usr/local/squid27' '--enable-async-io' '-enable-storeio=aufs,coss' '--enable-removal-policies=heap,lru' '--enable-snmp' '--with-openssl=/opt/ssl' '--enable-wccp' proxy-br# iostat -c 5 -w 3 tty da0 pass0 cpu tin tout KB/t tps MB/s KB/t tps MB/s us ni sy in id 0 138 13.88 2 0.03 0.00 0 0.00 4 0 1 0 95 0 140 11.00 1 0.01 0.00 0 0.00 11 0 5 1 83 0 133 11.00 1 0.01 0.00 0 0.00 16 0 5 1 78 0 86 16.00 0 0.01 0.00 0 0.00 13 0 4 1 82 0 132 3.07 5 0.01 0.00 0 0.00 14 0 4 1 80 proxy-br# vmstat procs memory page disks faults cpu r b w avm fre flt re pi po fr sr da0 pa0 in sy cs us sy id 1 0 0 924M 154M 20 0 0 0 6 1 0 0 189 1178 1366 4 1 95 proxy-br# systat /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average || /0% /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 root idle XX root idle X squid squid X root kernel X my squid.conf is as below http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? no_cache deny QUERY cache_mem 256 MB visible_hostname pxy #negative_ttl 0 acl PURGE method PURGE acl localhost src 127.0.0.1 http_access allow PURGE localhost http_access deny PURGE cache_replacement_policy heap LFUDA memory_replacement_policy heap GDSF cache_dir aufs /cache 45000 16 256 cache_store_log /dev/null #/var/log/squid27/store.log cache_store_log none cache_swap_low 80 cache_swap_high 90 cache_log /var/log/squid27/cache.log cache_access_log /var/log/squid27/access.log half_closed_clients off ... ...acl... . #always_direct allow myiplist cache_mgr x...@ cache_effective_user squid cache_effective_group squid logfile_rotate 0 buffered_logs on nonhierarchical_direct off prefer_direct off ie_refresh on ftp_list_width 32 ftp_passive on ftp_sanitycheck on ftp_telnet_protocol on emulate_httpd_log on Your expert opinion is required, please. Warm Regards, .Goody.
Re: [squid-users] very slow browsing and page is not displaed properly
Dear Members, In addition to below information, I have added some more info regarding machine hardware and platform. RAM = 4 GB Processors = 4 HDDs SATA having implemented RAID-5 Running on VMWARE ESXi 3.5. Should you need any info, pls let me know. Waiting for your expert opinion, please. Warm Regards, .goody. - Original Message From: goody goody To: squid-users@squid-cache.org Sent: Thu, May 20, 2010 4:31:21 PM Subject: [squid-users] very slow browsing and page is not displaed properly Hi, Version information and some statistics collected by me are as below. At times, my users complain the browsing becomes deadly slow and we page like yahoo, after much delay is displayed scattered and pictures are not visible rather "X" sign is displayed and after few times refresh screen becomes better. proxy-br# uname -a FreeBSD proxy-br 0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 proxy-br# /usr/local/squid27/sbin/squid -v Squid Cache: Version 2.7.STABLE9 configure options: '--prefix=/usr/local/squid27' '--enable-async-io' '-enable-storeio=aufs,coss' '--enable-removal-policies=heap,lru' '--enable-snmp' '--with-openssl=/opt/ssl' '--enable-wccp' proxy-br# iostat -c 5 -w 3 tty da0pass0 cpu tin tout KB/t tps MB/s KB/t tps MB/s us ni sy in id 0 138 13.88 2 0.03 0.00 0 0.00 4 0 1 0 95 0 140 11.00 1 0.01 0.00 0 0.00 11 0 5 1 83 0 133 11.00 1 0.01 0.00 0 0.00 16 0 5 1 78 086 16.00 0 0.01 0.00 0 0.00 13 0 4 1 82 0 132 3.07 5 0.01 0.00 0 0.00 14 0 4 1 80 proxy-br# vmstat procs memory pagedisks faults cpu r b w avmfre flt re pi pofr sr da0 pa0 in sy cs us sy id 1 0 0924M 154M20 0 0 0 6 1 0 0 189 1178 1366 4 1 95 proxy-br# systat /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average || /0% /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 root idle XX root idle X squid squid X root kernel X my squid.conf is as below http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? no_cache deny QUERY cache_mem 256 MB visible_hostname pxy #negative_ttl 0 acl PURGE method PURGE acl localhost src 127.0.0.1 http_access allow PURGE localhost http_access deny PURGE cache_replacement_policy heap LFUDA memory_replacement_policy heap GDSF cache_dir aufs /cache 45000 16 256 cache_store_log /dev/null #/var/log/squid27/store.log cache_store_log none cache_swap_low 80 cache_swap_high 90 cache_log /var/log/squid27/cache.log cache_access_log /var/log/squid27/access.log half_closed_clients off ... ...acl... . #always_direct allow myiplist cache_mgr x...@ cache_effective_user squid cache_effective_group squid logfile_rotate 0 buffered_logs on nonhierarchical_direct off prefer_direct off ie_refresh on ftp_list_width 32 ftp_passive on ftp_sanitycheck on ftp_telnet_protocol on emulate_httpd_log on Your expert opinion is required, please. Warm Regards, .Goody.
[squid-users] very slow browsing and page is not displaed properly
Hi, Version information and some statistics collected by me are as below. At times, my users complain the browsing becomes deadly slow and we page like yahoo, after much delay is displayed scattered and pictures are not visible rather "X" sign is displayed and after few times refresh screen becomes better. proxy-br# uname -a FreeBSD proxy-br 0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 proxy-br# /usr/local/squid27/sbin/squid -v Squid Cache: Version 2.7.STABLE9 configure options: '--prefix=/usr/local/squid27' '--enable-async-io' '-enable-storeio=aufs,coss' '--enable-removal-policies=heap,lru' '--enable-snmp' '--with-openssl=/opt/ssl' '--enable-wccp' proxy-br# iostat -c 5 -w 3 tty da0pass0 cpu tin tout KB/t tps MB/s KB/t tps MB/s us ni sy in id 0 138 13.88 2 0.03 0.00 0 0.00 4 0 1 0 95 0 140 11.00 1 0.01 0.00 0 0.00 11 0 5 1 83 0 133 11.00 1 0.01 0.00 0 0.00 16 0 5 1 78 086 16.00 0 0.01 0.00 0 0.00 13 0 4 1 82 0 132 3.07 5 0.01 0.00 0 0.00 14 0 4 1 80 proxy-br# vmstat procs memory pagedisks faults cpu r b w avmfre flt re pi pofr sr da0 pa0 in sy cs us sy id 1 0 0924M 154M20 0 0 0 6 1 0 0 189 1178 1366 4 1 95 proxy-br# systat /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average || /0% /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 root idle XX root idle X squid squid X root kernel X my squid.conf is as below http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? no_cache deny QUERY cache_mem 256 MB visible_hostname pxy #negative_ttl 0 acl PURGE method PURGE acl localhost src 127.0.0.1 http_access allow PURGE localhost http_access deny PURGE cache_replacement_policy heap LFUDA memory_replacement_policy heap GDSF cache_dir aufs /cache 45000 16 256 cache_store_log /dev/null #/var/log/squid27/store.log cache_store_log none cache_swap_low 80 cache_swap_high 90 cache_log /var/log/squid27/cache.log cache_access_log /var/log/squid27/access.log half_closed_clients off ... ...acl... . #always_direct allow myiplist cache_mgr x...@ cache_effective_user squid cache_effective_group squid logfile_rotate 0 buffered_logs on nonhierarchical_direct off prefer_direct off ie_refresh on ftp_list_width 32 ftp_passive on ftp_sanitycheck on ftp_telnet_protocol on emulate_httpd_log on Your expert opinion is required, please. Warm Regards, .Goody.