[SR-Users] A bit trick in msg_translator.c source file
Hello , Does anybody know why the lenght of both ip-address (s and name) in check_via_address function in msg_translator.c source file dose not check first? Actually i think it's better do. For example if via:192.168.122.1 and src:192.168.122.100, the result returned true, as they are not the same! With.Regards. Mojtaba Happy new year --Mojtaba Esfandiari.S ___ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] kamailio does not responde if an rtpengine is unreachable
hello Daniel
Thanks a lot for the update. We will also test it.
It has not 100% relation with this issue, but i only wanted to share the setup
we have for cases where a rtpengine fails having high traffic load, to minimize
the impact on the kamailio processes.
modparam("rtpengine", "queried_nodes_limit", 2)
modparam("rtpengine", "rtpengine_retr", 2)
modparam("rtpengine", "rtpengine_tout_ms", 350)
considering we don't use sets with more than 2 rtpengine instances, at least
for retry attempts. And your rtpengine instances are in the same network too.
this works quite fine for us, there are some few secs of impact while the
rtpengine is marked as disabled, but the system recovers quite ok.
best regards
david
-Original Message-
From: "Daniel-Constantin Mierla"
Sent: Friday, December 28, 2018 9:15am
To: "Juha Heinanen"
Cc: "Kamailio (SER) - Users Mailing List"
Subject: Re: [SR-Users] kamailio does not responde if an rtpengine is
unreachable
I just pushed a series of commits trying to rework how loading (and
reloading) of rtpegines list is done, to avoid that sync'ed probing,
which can take long if any of the rtpengines is down.
Now, building the local (per process) structures/sockets for rtpengines
during kamailio start up is done without locking. This is guarded by the
fact a reload command can be executed only after all children were
initialized (added also with these commits). Moreover, the probing of
rtpeningesis done only by child process 1, because the status is stored
in shared memory list, so it is visible in all children. Based on my
understanding there, doing probing from all processes is useless now,
that was probably kept from the time when the list was not stored in
shared memory, from the early rtpproxy times.
There is also a restriction on how often the rtpengine list can be
reloaded, now having a 10 seconds interval guard. I added this because
the reload is done over the old list, not building a new list to swap
with the old one. So it requires some time to walk through the existing
list and update based on the new records. I went this way for now, even
building a new list may be better/safer in long term, but it would
require more work. I also wanted to avoid being very intrusive right
now, given that those patches would need to be backported.
The last relevant change was to use a version number to discover when a
reload was done. So far, as I understood, it was relying on the number
of rtpengines, but one may trigger a reload with same rtpengines, but
different attributes (e.g., disabled or not). Having a version number is
better in detecting when each worker needs to rebuild its local list of
sockets, as well as for troubleshooting, because a value is increased
with each reload, so easier to track if it was done or now.
I didn't have time for any tests, so it would be good if you can test
and report if works as expected.
All related commits are in master, if they prove to work fine, we can
backport all those patches.
Cheers,
Daniel
On 26.12.18 12:46, Juha Heinanen wrote:
> Daniel-Constantin Mierla writes:
>
>> I pushed a quick fix for the case when db support is not enabled,
>> because these locks are useless in that case, so all children will do
>> the rtpengine init at the same time, without waiting for the others:
> Still took in rtpengine db mode about 2 minutes before kamailio became
> responsive after start.
>
> -- Juha
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in
Washington, DC, USA -- www.asipto.com
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] Logging from cfg file
Hi,
You could use xlog instead of log, like this:
xlog("Register request...\n");
With Regards.Mojtaba
On Sat, Dec 29, 2018 at 11:14 AM Muhammad Allaudin
wrote:
>
> Hi everyone,
>
> I have recently started working on Kamailio, I am trying to learn the basics.
> For "Register" route, I am trying to print the log but log is not appearing
> in log file. Other logs are there, only this one is missing.
>
> if(is_method("REGISTER")){
> log(2, "Register request");
> }
>
> I will be really helpful if you can help me with this.
>
> Thanks & Kind Regards
>
> Regards,
> M.Allaudin
> Software Engineer
> Nowtel Group
> Phone # +92-333-8291874
> Blogger @ allaudin.github.io
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] A bit trick in msg_translator.c source file
Am Samstag, 29. Dezember 2018, 10:43:54 CET schrieb Mojtaba: > Hello , > Does anybody know why the lenght of both ip-address (s and name) in > check_via_address function in msg_translator.c source file dose not > check first? > Actually i think it's better do. > For example if via:192.168.122.1 and src:192.168.122.100, the result > returned true, as they are not the same! > With.Regards. Mojtaba Hello Mojtaba, can you give more details, which line in e.g. git master are you referring to? Best regards, Henning -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://skalatan.de/services Kamailio security assessment - https://skalatan.de/de/assessment ___ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] Logging from cfg file
I prefer using
log(“L_ERR”, “[REQUEST_ROUTE]: $ci Register Request\n”);
That way you have the route block where you are logging from and the
Call-ID with your information string. (I mostly use L_ERR when debugging)
Cheers
On Sat, 29 Dec 2018 at 11:02, Mojtaba wrote:
> Hi,
> You could use xlog instead of log, like this:
> xlog("Register request...\n");
> With Regards.Mojtaba
>
> On Sat, Dec 29, 2018 at 11:14 AM Muhammad Allaudin
> wrote:
> >
> > Hi everyone,
> >
> > I have recently started working on Kamailio, I am trying to learn the
> basics. For "Register" route, I am trying to print the log but log is not
> appearing in log file. Other logs are there, only this one is missing.
> >
> > if(is_method("REGISTER")){
> > log(2, "Register request");
> > }
> >
> > I will be really helpful if you can help me with this.
> >
> > Thanks & Kind Regards
> >
> > Regards,
> > M.Allaudin
> > Software Engineer
> > Nowtel Group
> > Phone # +92-333-8291874
> > Blogger @ allaudin.github.io
> > ___
> > Kamailio (SER) - Users Mailing List
> > sr-users@lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> --Mojtaba Esfandiari.S
>
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] Logging from cfg file
I wonder if there is a $something that contains the route-block-name?
Anyone know?
On Sat, Dec 29, 2018 at 10:52 David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> I prefer using
>
> log(“L_ERR”, “[REQUEST_ROUTE]: $ci Register Request\n”);
>
> That way you have the route block where you are logging from and the
> Call-ID with your information string. (I mostly use L_ERR when debugging)
>
> Cheers
> On Sat, 29 Dec 2018 at 11:02, Mojtaba wrote:
>
>> Hi,
>> You could use xlog instead of log, like this:
>> xlog("Register request...\n");
>> With Regards.Mojtaba
>>
>> On Sat, Dec 29, 2018 at 11:14 AM Muhammad Allaudin
>> wrote:
>> >
>> > Hi everyone,
>> >
>> > I have recently started working on Kamailio, I am trying to learn the
>> basics. For "Register" route, I am trying to print the log but log is not
>> appearing in log file. Other logs are there, only this one is missing.
>> >
>> > if(is_method("REGISTER")){
>> > log(2, "Register request");
>> > }
>> >
>> > I will be really helpful if you can help me with this.
>> >
>> > Thanks & Kind Regards
>> >
>> > Regards,
>> > M.Allaudin
>> > Software Engineer
>> > Nowtel Group
>> > Phone # +92-333-8291874
>> > Blogger @ allaudin.github.io
>> > ___
>> > Kamailio (SER) - Users Mailing List
>> > sr-users@lists.kamailio.org
>> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>> --
>> --Mojtaba Esfandiari.S
>>
>> ___
>> Kamailio (SER) - Users Mailing List
>> sr-users@lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] Logging from cfg file
Joel , you could use $cfg(route) !
I usually store my breadcrumbs in a define and use on top of every
interesting route !
Il giorno sab 29 dic 2018 alle 21:29 Joel Serrano ha
scritto:
> I wonder if there is a $something that contains the route-block-name?
>
> Anyone know?
>
>
> On Sat, Dec 29, 2018 at 10:52 David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>> I prefer using
>>
>> log(“L_ERR”, “[REQUEST_ROUTE]: $ci Register Request\n”);
>>
>> That way you have the route block where you are logging from and the
>> Call-ID with your information string. (I mostly use L_ERR when debugging)
>>
>> Cheers
>> On Sat, 29 Dec 2018 at 11:02, Mojtaba wrote:
>>
>>> Hi,
>>> You could use xlog instead of log, like this:
>>> xlog("Register request...\n");
>>> With Regards.Mojtaba
>>>
>>> On Sat, Dec 29, 2018 at 11:14 AM Muhammad Allaudin
>>> wrote:
>>> >
>>> > Hi everyone,
>>> >
>>> > I have recently started working on Kamailio, I am trying to learn the
>>> basics. For "Register" route, I am trying to print the log but log is not
>>> appearing in log file. Other logs are there, only this one is missing.
>>> >
>>> > if(is_method("REGISTER")){
>>> > log(2, "Register request");
>>> > }
>>> >
>>> > I will be really helpful if you can help me with this.
>>> >
>>> > Thanks & Kind Regards
>>> >
>>> > Regards,
>>> > M.Allaudin
>>> > Software Engineer
>>> > Nowtel Group
>>> > Phone # +92-333-8291874
>>> > Blogger @ allaudin.github.io
>>> > ___
>>> > Kamailio (SER) - Users Mailing List
>>> > sr-users@lists.kamailio.org
>>> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>>
>>> --
>>> --Mojtaba Esfandiari.S
>>>
>>> ___
>>> Kamailio (SER) - Users Mailing List
>>> sr-users@lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>> ___
>> Kamailio (SER) - Users Mailing List
>> sr-users@lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
--
*Paolo Visintin*
*CTO*
evosip.cloud
[image: Risultati immagini per evosip]
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] Logging from cfg file
yep: $cfg(route)
added Jun 2017
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Sat, Dec 29, 2018 at 10:09 PM * Paolo Visintin - evosip.cloud
wrote:
> Joel , you could use $cfg(route) !
>
> I usually store my breadcrumbs in a define and use on top of every
> interesting route !
>
>
> Il giorno sab 29 dic 2018 alle 21:29 Joel Serrano ha
> scritto:
>
>> I wonder if there is a $something that contains the route-block-name?
>>
>> Anyone know?
>>
>>
>> On Sat, Dec 29, 2018 at 10:52 David Villasmil <
>> david.villasmil.w...@gmail.com> wrote:
>>
>>> I prefer using
>>>
>>> log(“L_ERR”, “[REQUEST_ROUTE]: $ci Register Request\n”);
>>>
>>> That way you have the route block where you are logging from and the
>>> Call-ID with your information string. (I mostly use L_ERR when debugging)
>>>
>>> Cheers
>>> On Sat, 29 Dec 2018 at 11:02, Mojtaba wrote:
>>>
Hi,
You could use xlog instead of log, like this:
xlog("Register request...\n");
With Regards.Mojtaba
On Sat, Dec 29, 2018 at 11:14 AM Muhammad Allaudin
wrote:
>
> Hi everyone,
>
> I have recently started working on Kamailio, I am trying to learn the
basics. For "Register" route, I am trying to print the log but log is not
appearing in log file. Other logs are there, only this one is missing.
>
> if(is_method("REGISTER")){
> log(2, "Register request");
> }
>
> I will be really helpful if you can help me with this.
>
> Thanks & Kind Regards
>
> Regards,
> M.Allaudin
> Software Engineer
> Nowtel Group
> Phone # +92-333-8291874
> Blogger @ allaudin.github.io
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>> ___
>>> Kamailio (SER) - Users Mailing List
>>> sr-users@lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>> ___
>> Kamailio (SER) - Users Mailing List
>> sr-users@lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> --
> *Paolo Visintin*
> *CTO*
> evosip.cloud
> [image: Risultati immagini per evosip]
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] Logging from cfg file
Adding it to my log_prefix !!!
Sounds dum but this simplifies my logging so much 😂😂
Thanks guys, every day you learn something new!
On Sat, Dec 29, 2018 at 14:42 David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> yep: $cfg(route)
> added Jun 2017
> Regards,
>
> David Villasmil
> email: david.villasmil.w...@gmail.com
> phone: +34669448337
>
>
> On Sat, Dec 29, 2018 at 10:09 PM * Paolo Visintin - evosip.cloud
> wrote:
>
>> Joel , you could use $cfg(route) !
>>
>> I usually store my breadcrumbs in a define and use on top of every
>> interesting route !
>>
>>
>> Il giorno sab 29 dic 2018 alle 21:29 Joel Serrano ha
>> scritto:
>>
>>> I wonder if there is a $something that contains the route-block-name?
>>>
>>> Anyone know?
>>>
>>>
>>> On Sat, Dec 29, 2018 at 10:52 David Villasmil <
>>> david.villasmil.w...@gmail.com> wrote:
>>>
I prefer using
log(“L_ERR”, “[REQUEST_ROUTE]: $ci Register Request\n”);
That way you have the route block where you are logging from and the
Call-ID with your information string. (I mostly use L_ERR when debugging)
Cheers
On Sat, 29 Dec 2018 at 11:02, Mojtaba wrote:
> Hi,
> You could use xlog instead of log, like this:
> xlog("Register request...\n");
> With Regards.Mojtaba
>
> On Sat, Dec 29, 2018 at 11:14 AM Muhammad Allaudin
> wrote:
> >
> > Hi everyone,
> >
> > I have recently started working on Kamailio, I am trying to learn
> the basics. For "Register" route, I am trying to print the log but log is
> not appearing in log file. Other logs are there, only this one is missing.
> >
> > if(is_method("REGISTER")){
> > log(2, "Register request");
> > }
> >
> > I will be really helpful if you can help me with this.
> >
> > Thanks & Kind Regards
> >
> > Regards,
> > M.Allaudin
> > Software Engineer
> > Nowtel Group
> > Phone # +92-333-8291874
> > Blogger @ allaudin.github.io
> > ___
> > Kamailio (SER) - Users Mailing List
> > sr-users@lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> --Mojtaba Esfandiari.S
>
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>> ___
>>> Kamailio (SER) - Users Mailing List
>>> sr-users@lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>> --
>> *Paolo Visintin*
>> *CTO*
>> evosip.cloud
>> [image: Risultati immagini per evosip]
>> ___
>> Kamailio (SER) - Users Mailing List
>> sr-users@lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> ___
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
