Android not finishing boot
I've just tried putting Qi and androidfs-koolu-beta3.jffs2 onto my Freerunner. http://freerunner.android.koolu.com/release-files Qi seemed to work fine with Om2009 testing. However, Android only partially boots and I'm unable to get the boot menu again to load a different image. Holding down the AUX button while starting and holding the power button no longer does the trick. How do I get the boot menu again? -Lars Here is what shows on the screen when booting stops: Freeing init memory: 132K Warning: unable to open an initial console A N D R O I D [21474550.150] modem wakeup interupt init: Unable to open persistent property directory /data/propery errno:2 init: cannot find '/system/bin/playmp3', disabling 'bootsound' init: cannot find '/system/bin/flash_image', disabling 'flash_recovery' warning: `rild' uses 32-bit capabilities (legacy support in use) The unit will respond to pressing the power button with messages like this: pcf50633 0-0073: ONKEY is held pcf50633 0-0073: ONKEY is held for 1 secs etc. so holding it down does not poweroff the unit. Popping the battery does, but when booting, the unit vibrates very briefly then the AUX button blinks red once. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: Android not finishing boot
2009/6/5 Lars Nooden lars.cura...@gmail.com: I've just tried putting Qi and androidfs-koolu-beta3.jffs2 onto my Freerunner. http://freerunner.android.koolu.com/release-files Qi seemed to work fine with Om2009 testing. However, Android only partially boots and I'm unable to get the boot menu again to load a different image. Holding down the AUX button while starting and holding the power button no longer does the trick. How do I get the boot menu again? Press and hold the AUX button, then press and hold the power button. After 2 or 3 seconds the NOR boot menu should appear. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: Android not finishing boot
Joachim Ott wrote: Press and hold the AUX button, then press and hold the power button. After 2 or 3 seconds the NOR boot menu should appear. Thanks! It was the sequence that mattered. Regards -Lars ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Android Software Development - Failure -12
Hello I write HelloWorld in Android-Java. In SDK it working fine. But when try to install it on my OpenMoko it did not work: $ ./adb install ~/workspace/p/HW/bin/HW.apk 115 KB/s (8870 bytes in 0.074s) pkg: /data/local/tmp/HW.apk Failure [-12] I was trying in v1.1 and v1.5. Can somebody help me? THX Walery ;o) -- Follow me: http://twitter.com/walery ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
[Om 2009] X in grayscale after suspending (r4, testing)
Hey! Was trying release 4 and I am quite impressed about how the phone functionalities improved! Well done! I have noticed one little thing: when i suspend the phone and afterwards wake it up, my illume goes into grayscale mode. In other words the colors get lost in X after the suspend. Does someone else have the same problem out there? -- View this message in context: http://n2.nabble.com/-Om-2009--X-in-grayscale-after-suspending-%28r4%2C-testing%29-tp3031505p3031505.html Sent from the Openmoko Support mailing list archive at Nabble.com. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: [Om 2009] X in grayscale after suspending (r4, testing)
On Fri, Jun 5, 2009 at 7:34 PM, MicVMssj2mi...@gmail.com wrote: Hey! Was trying release 4 and I am quite impressed about how the phone functionalities improved! Well done! I have noticed one little thing: when i suspend the phone and afterwards wake it up, my illume goes into grayscale mode. In other words the colors get lost in X after the suspend. Does someone else have the same problem out there? I know some that have had it with other distributions, this is the first time I hear it with OM2009. Are you running Qi? r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: [Om 2009] X in grayscale after suspending (r4, testing)
Risto H. Kurppa wrote: On Fri, Jun 5, 2009 at 7:34 PM, MicVMssj2mi...@gmail.com wrote: Hey! Was trying release 4 and I am quite impressed about how the phone functionalities improved! Well done! I have noticed one little thing: when i suspend the phone and afterwards wake it up, my illume goes into grayscale mode. In other words the colors get lost in X after the suspend. Does someone else have the same problem out there? I know some that have had it with other distributions, this is the first time I hear it with OM2009. Are you running Qi? r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support It seems to be a Qi Problem (I used qi-s3c2442-1.0.2+gitr3b8513d8b3d9615ebda605de4bda18371aa3f359.udfu). I tried also other distros and the same problem occurs. Before installing Om2009 I had uBoot and it worked. Now i tried SHR with qi and with uBoot and indeed with uboot it works. -- View this message in context: http://n2.nabble.com/-Om-2009--X-in-grayscale-after-suspending-%28r4%2C-testing%29-tp3031505p3032849.html Sent from the Openmoko Support mailing list archive at Nabble.com. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Where is mplayer?
Hi All, I'm sure that there's going to be an easy answer to this... probably something like, you haven't configured opkg source [x]. If that's the case, I would appreciate some detailed help in setting up the appropriate source. So my question is: Where is the mplayer package? There are a number of media player applications that explicitly require mplayer as a backend. However, I can't seem to find a source for the mplayer package. I'm using OM2008.12. My configured sources look like this: r...@om-gta02:/etc/opkg# ls Multiverse-feed.conf all-feed.conf arch.conf armv4t-feed.conf om-gta02-feed.conf r...@om-gta02:/etc/opkg# cat * src/gz daily-Multiverse http://downloads.openmoko.org/repository/Multiverse src/gz om-dev-all http://downloads.openmoko.org/repository/Om2008.8/all arch all 1 arch any 6 arch noarch 11 arch arm 16 arch armv4t 21 arch om-gta02 26 src/gz om-dev-armv4t http://downloads.openmoko.org/repository/Om2008.8/armv4t src/gz om-dev-om-gta02 http://downloads.openmoko.org/repository/Om2008.8/om-gta02 The Video Player page on the wiki (http://wiki.openmoko.org/wiki/Video_Player) unhelpfully gives the standard opkg command (opkg install mplayer) which is obvious, but doesn't work in my case. What am I missing? Any help is appreciated. -- View this message in context: http://n2.nabble.com/Where-is-mplayer--tp3034029p3034029.html Sent from the Openmoko Support mailing list archive at Nabble.com. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: Where is mplayer?
2009/6/6 jamesmh ja...@hiebert.name: So my question is: Where is the mplayer package? There are a number of media player applications that explicitly require mplayer as a backend. However, I can't seem to find a source for the mplayer package. I'm using OM2008.12. My configured sources look like this: it's not in the repos cos of patent issues. look through the past few days' mails for explanations http://wiki.openmoko.org/wiki/Video_Player#Using_the_Glamo_XV_acceleration will show you how to get it. very easy. you only need the first four lines, and the two commands which start with 'cp' ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
