[pfSense Support] Captive Portal, VMWare and Radius
Hi All, I am using the pfSense on VMWare using the developers image. On the same machine i setup another VM with Win98. Everything is working good, DHCP, Captive Portal (NoAuth and LocalUserList). But, some strange stuff happens when i choose Radius Auth! My Radius server is another machine running outside world. In the firewall i allowed IN and OUT to UDP 1812, 1813 ports... When i try to login thru captive portal in Win98, it´s hanging. But calling the radius using NTRadPing inside the same Win98, it works! And using a radiusclient inside pfSense works too. Only when the php try to retrieve the info from Radius hangs. No matter if it use the custom radius code or using the libradius extension. My VMWare Net is: - Win98: 192.168.65.131 - pfSense: 192.168.65.130 (LAN) - pfSense: 192.168.160.129 (WAN) - VMWare NAT: 192.168.160.130 - VMWare Gateway: 192.168.160.2 Obs.: My Machine is using a DSL router with WinXP for the tests and Dev. A deep look in the calls showed this log in pftop: Using NTRadPing:udp In 192.168.65.131:1076 200.184.125.*:1812 SINGLE:MULTIPLE udp Out 192.168.65.131:1076 200.184.125.*:1812 MULTIPLE:SINGLE Output:Sending authentication request to server 200.184.125.*:1812Transmitting packet, code=1 id=6 length=44Received response from server in 600 miliseconds Replay packet code=2 id=6 length=30Response: Accept-Accept Captive Portal:tcp In 192.168.65.131:1077 192.168.65.130:8000 ESTABLISHED:ESTABLISHED udp Out 192.168.160.129:61371 200.184.125.*:1812 MULTIPLE:SINGLE udp Out 192.168.160.129:64110 200.184.195.*:1812 SINGLE:NO_TRAFFIC Output: Radius Error: No valid RADIUS responses received. My surprise is that the pfSense call to radius and it´s reply (I run Radius in DebugMode). But the pfSense don´t receive the response. I guess that i missed something on firewall. ;) Anyone had some ideia about what's happen? Or any tip to find it out?Best Regards,Luiz Vaz
Re: [pfSense Support] pfsense-Embedded on a Soekris net4801
There's a couple hints here and there, but the blog has one post: http://pfsense.blogspot.com/2005/04/note-about-soekris-4801s.html I'd recommend upgrading to the latest soekris bios, you'll need to see this though: http://faq.pfsense.org/index.php?action=artikel&cat=2&id=28&artlang=en&highlight=soekris --Bill On 2/15/06, Colin Baker <[EMAIL PROTECTED]> wrote: > Hello, > > I'm attempting to set up pfsense on a Soekris net4801 system. I > downloaded the pfSense-Embedded-1.0BETA1.img.gz image, and tried to load > it onto a 1 GB compact flash card from my linux pc. It looks like it > worked: > > # gunzip -c pfSense-Embedded-1.0BETA1.img.gz |dd of=/dev/sda1 bs=16k > 3776+1 records in > 3776+1 records out > 61868032 bytes (62 MB) copied, 23.5261 seconds, 2.6 MB > > However, when I move the card to the Soekris box, it does not boot: > > > comBIOS ver. 1.27 20041122 Copyright (C) 2000-2004 Soekris Engineering. > > net4801 > > 0128 Mbyte MemoryCPU Geode 266 Mhz > > Pri Mas SanDisk SDCFB-1024 LBA Xlt 993-32-63 1001 Mbyte > > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1Base2 Int > --- > 0:00:0 1078 0001 0600 0107 0280 00 00 00 > 0:06:0 100B 0020 0200 0107 0290 00 3F 00 E101 A000 10 > 0:07:0 100B 0020 0200 0107 0290 00 3F 00 E201 A0001000 10 > 0:08:0 100B 0020 0200 0107 0290 00 3F 00 E301 A0002000 10 > 0:18:2 100B 0502 01018001 0005 0280 00 00 00 > 0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 11 > > 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. > Boot error > > > I tried copying the image from a FreeBSD machine too, but I'm seeing the > same problem. Am I using the correct image? Or, is there something > else I'm missing that needs to be done to get this working on a Soekris box? > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: AW: [pfSense Support] Problem accessing some sites
Vivek Khera wrote: On Feb 14, 2006, at 3:08 PM, Rainer Duffner wrote: Received disconnect from 62.146.20.26: 2: Corrupted MAC on input. I used to get this on a system with a busted motherboard. Run whatever diagnostics you can on it, or try a different system. I'm voting hardware error now. OK, so I get this "disconnect" with the old Netgear, too. BTW: the old netgear says: router> ip ifconfig enif0: mtu 1500 inet 192.168.1.1, netmask 0xff00, broadcast 192.168.1.255 RIP RX:Ver 1 & 2, TX:Ver 1, [InOctets 3189562] [InUnicast 32616] [InMulticast 12] [InDiscards 1] [InErrors 0] [InUnknownProtos1] [OutOctets 12582494] [OutUnicast31516] [OutMulticast 426] [OutDiscards 3] [OutErrors 0] wanif0: mtu 1492 inet 217.71.83.52, netmask 0x, broadcast 255.255.255.255 RIP RX:None, TX:None, [InOctets 12399710] [InUnicast 31330] [InMulticast0] [InDiscards 0] [InErrors 0] [InUnknownProtos0] [OutOctets 3102083] [OutUnicast32451] [OutMulticast 0] [OutDiscards 0] [OutErrors 0] Maybe it's my linksys-AP. I'll have to do some more experiments with another AP. cheers, Rainer - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] pfsense-Embedded on a Soekris net4801
Hello, I'm attempting to set up pfsense on a Soekris net4801 system. I downloaded the pfSense-Embedded-1.0BETA1.img.gz image, and tried to load it onto a 1 GB compact flash card from my linux pc. It looks like it worked: # gunzip -c pfSense-Embedded-1.0BETA1.img.gz |dd of=/dev/sda1 bs=16k 3776+1 records in 3776+1 records out 61868032 bytes (62 MB) copied, 23.5261 seconds, 2.6 MB However, when I move the card to the Soekris box, it does not boot: comBIOS ver. 1.27 20041122 Copyright (C) 2000-2004 Soekris Engineering. net4801 0128 Mbyte MemoryCPU Geode 266 Mhz Pri Mas SanDisk SDCFB-1024 LBA Xlt 993-32-63 1001 Mbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1Base2 Int --- 0:00:0 1078 0001 0600 0107 0280 00 00 00 0:06:0 100B 0020 0200 0107 0290 00 3F 00 E101 A000 10 0:07:0 100B 0020 0200 0107 0290 00 3F 00 E201 A0001000 10 0:08:0 100B 0020 0200 0107 0290 00 3F 00 E301 A0002000 10 0:18:2 100B 0502 01018001 0005 0280 00 00 00 0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 11 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. Boot error I tried copying the image from a FreeBSD machine too, but I'm seeing the same problem. Am I using the correct image? Or, is there something else I'm missing that needs to be done to get this working on a Soekris box? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] developer image creation
I deleted the contents of /home/pfsense/pfsense And re ran the build-embedded script and all was upto data again. Very funny. But it works for me doing this -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: 14 February 2006 18:55 To: support@pfsense.com Subject: Re: [pfSense Support] developer image creation You're setup is not being sync'd. Not sure why however. On 2/14/06, alan walters <[EMAIL PROTECTED]> wrote: > When creating a new image at the moment the version tag is showing up as > > Prebeta1 28-01-06 > > But in the releng 1 branch the version tag is beta2 > Does anyone have an idea of what could be going on here > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
