Dear All, Based on the following scenario and configurations shown here,
PFSense-1 --------- WAN Interface, public IP: 218.208.98.20/27 GW: 218.208.98.1 DNS1: 202.188.0.133 DNS2: 202.188.1.5 LAN Interface, public IP: 218.208.98.21/27 and bridged to WAN interface DHCP server enabled with the range of 218.208.98.24 to 218.208.98.26 PPPoE enabled on LAN interface with Radius authentication as the following configurations: Server Address: 10.10.10.10 Issue IP Addresses via RADIUS server is enabled PFSense-2 --------- WAN Interface, public IP: 218.208.98.22/27 GW: 218.208.98.1 DNS1: 202.188.0.133 DNS2: 202.188.1.5 LAN Interface, public IP: 218.208.98.23/27 and bridged to WAN interface DHCP server enabled with the range of 218.208.98.28 to 218.208.98.31 PPPoE enabled on LAN interface with Radius authentication as the following configurations: Server Address: 10.10.20.10 Issue IP Addresses via RADIUS server is enabled WAN LAN |----------------| |--------|Access Point(AP)| | |----------------| | |----------------| |--------| |----| |------| |----------| PFSense-1 |----| Switch |---|ATA |---|Phone | | | in Bridge mode | |--------| |----| |------| |--------| |----------------| | -----| Switch | | |----| |--------| |--------| PC | | | | |----| | | | |----------------| | | | | PFSense-2 | |---------------| | | |----------| in Bridge mode |----| Same as above | | | |----------------| |---------------| | | | | |-------------| | -------------| SIP Server | | |-------------| | | |---------------| |---------------| Radius Server | |---------------| As noted above that each interface on both PFSense is assigned a public IP where the LANs interfaces are bridged to the WAN. All the PCes (Wired and Wireless) have to be on public IP addresses assigned by DHCP for remote monitoring and they have to login using the captive portal authentication in order to access the Internet. The ATA connects normal phones to sip server in order to make VoIP calls with other phones on the same network or the other one. The ATA Automatically dials a PPPoE to PFSense to establish a PPPoE connection using Radius authentication and assigned a public IP address pushed by the Radius based on the attributes, for example FRAM-IP-ADDRESS=218.208.98.27 and FRAM-IP-NETMASK=225.225.225.224 bound to the authentication account in the Radius server. Each ATA has its own authentication account bound to a unique public IP address registered in the Radius server I am facing two problems: First: I cannot ping or access the ATA's web GUI from the WAN side although it has assigned a public IP after establishing the PPPoE connection and get it registered with the SIP server. Second: Sometimes one PC on one PFSense LAN gets a DHCP IP from the second PFSense because they are on a bridge mode. So how to stop this to happens? Your help is much appreciated and thanks in advance Regards Bassam --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]