AW: [pfSense Support] Soekris Net4801
The weird thing is that M0n0wall is running fine on the ones I am using (Kingston) -Ursprüngliche Nachricht- Von: Scott Ullrich [mailto:[EMAIL PROTECTED] Gesendet: Montag, 5. September 2005 18:28 An: Kevin Tollison Cc: support@pfsense.com Betreff: Re: [pfSense Support] Soekris Net4801 I use Lexar media and Sandisk. Generally have no issues out of either. Scott On 9/5/05, Kevin Tollison <[EMAIL PROTECTED]> wrote: > I have good result with PNY cards on Soekris boards as well. > > -- > Kevin > > > From: Bill Marquette [mailto:[EMAIL PROTECTED] > Sent: Monday, September 05, 2005 10:21 AM > To: Leuchter, Lars > Cc: Scott Ullrich; support@pfsense.com > Subject: Re: [pfSense Support] Soekris Net4801 > > Not all CF cards are created equal. Some are better than others. > > http://www.m0n0.ch/bsd/#knownprobs > http://lists.soekris.com/pipermail/soekris-tech/2004-October/022017.ht > ml > > --Bill > > PS. Scott, note the "especially Lexar" in the m0n0 page? Wasn't it > Lexar cards we were trying to use at the hackathon that gave us mixed results? > On 9/5/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: > Hi Scott > > Do you refer to the > > set flash=primary > reboot > > ?? > > If so, it doesn´t work, at least when using a 512MB Flash-Card.Is > there another hack how to make this possible ? > > Thanks > Lars > > > -Ursprüngliche Nachricht- > Von: Scott Ullrich [mailto:[EMAIL PROTECTED] > Gesendet: Sonntag, 4. September 2005 15:24 > An: Leuchter, Lars > Cc: support@pfsense.com > Betreff: Re: [pfSense Support] Soekris Net4801 > > Change your compact flash to primary in the BIOS.There is a blog entry > for this as well. > > Scott > > > On 9/4/05, Leuchter, Lars < [EMAIL PROTECTED]> wrote: > > > > Hi all, > > > > I am trying to get the latest embedded image to work on a Soekris > > Net4801, however, after I have written the image to flash-card and > > boot it up, I do get the following error message : > > > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A, console > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > Timecounters tick every 1.000 msec > > Fast IPsec: Initialized Security Association Processing. > > ad1: 497MB at ata0-slave PIO4 Trying to > > mount root from ufs:/dev/ad0a > > > > Manual root filesystem specification: > > :Mount using filesystem eg. > >ufs:da0s1a ?List valid disk boot devices Abort manual > >input > > > > mountroot> > > > > > > Any idea ? > > > > > > Thanks > > Lars > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Soekris Net4801
I use Lexar media and Sandisk. Generally have no issues out of either. Scott On 9/5/05, Kevin Tollison <[EMAIL PROTECTED]> wrote: > I have good result with PNY cards on Soekris boards as well. > > -- > Kevin > > > From: Bill Marquette [mailto:[EMAIL PROTECTED] > Sent: Monday, September 05, 2005 10:21 AM > To: Leuchter, Lars > Cc: Scott Ullrich; support@pfsense.com > Subject: Re: [pfSense Support] Soekris Net4801 > > Not all CF cards are created equal. Some are better than others. > > http://www.m0n0.ch/bsd/#knownprobs > http://lists.soekris.com/pipermail/soekris-tech/2004-October/022017.html > > --Bill > > PS. Scott, note the "especially Lexar" in the m0n0 page? Wasn't it Lexar > cards we were trying to use at the hackathon that gave us mixed results? > On 9/5/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: > Hi Scott > > Do you refer to the > > set flash=primary > reboot > > ?? > > If so, it doesn´t work, at least when using a 512MB Flash-Card.Is there > another hack how to make this possible ? > > Thanks > Lars > > > -Ursprüngliche Nachricht- > Von: Scott Ullrich [mailto:[EMAIL PROTECTED] > Gesendet: Sonntag, 4. September 2005 15:24 > An: Leuchter, Lars > Cc: support@pfsense.com > Betreff: Re: [pfSense Support] Soekris Net4801 > > Change your compact flash to primary in the BIOS.There is a blog entry for > this as well. > > Scott > > > On 9/4/05, Leuchter, Lars < [EMAIL PROTECTED]> wrote: > > > > Hi all, > > > > I am trying to get the latest embedded image to work on a Soekris > > Net4801, however, after I have written the image to flash-card and > > boot it up, I do get the following error message : > > > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A, console > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > Timecounters tick every 1.000 msec > > Fast IPsec: Initialized Security Association Processing. > > ad1: 497MB at ata0-slave PIO4 Trying to > > mount root from ufs:/dev/ad0a > > > > Manual root filesystem specification: > > :Mount using filesystem > >eg. ufs:da0s1a > > ?List valid disk boot devices > > Abort manual input > > > > mountroot> > > > > > > Any idea ? > > > > > > Thanks > > Lars > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] Soekris Net4801
I have good result with PNY cards on Soekris boards as well. -- Kevin From: Bill Marquette [mailto:[EMAIL PROTECTED] Sent: Monday, September 05, 2005 10:21 AM To: Leuchter, Lars Cc: Scott Ullrich; support@pfsense.com Subject: Re: [pfSense Support] Soekris Net4801 Not all CF cards are created equal. Some are better than others. http://www.m0n0.ch/bsd/#knownprobs http://lists.soekris.com/pipermail/soekris-tech/2004-October/022017.html --Bill PS. Scott, note the "especially Lexar" in the m0n0 page? Wasn't it Lexar cards we were trying to use at the hackathon that gave us mixed results? On 9/5/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: Hi Scott Do you refer to the set flash=primary reboot ?? If so, it doesn´t work, at least when using a 512MB Flash-Card. Is there another hack how to make this possible ? Thanks Lars -Ursprüngliche Nachricht- Von: Scott Ullrich [mailto:[EMAIL PROTECTED] Gesendet: Sonntag, 4. September 2005 15:24 An: Leuchter, Lars Cc: support@pfsense.com Betreff: Re: [pfSense Support] Soekris Net4801 Change your compact flash to primary in the BIOS. There is a blog entry for this as well. Scott On 9/4/05, Leuchter, Lars < [EMAIL PROTECTED]> wrote: > > Hi all, > > I am trying to get the latest embedded image to work on a Soekris > Net4801, however, after I have written the image to flash-card and > boot it up, I do get the following error message : > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > Timecounters tick every 1.000 msec > Fast IPsec: Initialized Security Association Processing. > ad1: 497MB at ata0-slave PIO4 Trying to > mount root from ufs:/dev/ad0a > > Manual root filesystem specification: > : Mount using filesystem >eg. ufs:da0s1a > ? List valid disk boot devices > Abort manual input > > mountroot> > > > Any idea ? > > > Thanks > Lars > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Soekris Net4801
Not all CF cards are created equal. Some are better than others. http://www.m0n0.ch/bsd/#knownprobs http://lists.soekris.com/pipermail/soekris-tech/2004-October/022017.html --Bill PS. Scott, note the "especially Lexar" in the m0n0 page? Wasn't it Lexar cards we were trying to use at the hackathon that gave us mixed results? On 9/5/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: Hi ScottDo you refer to theset flash=primaryreboot??If so, it doesn´t work, at least when using a 512MB Flash-Card. Is there another hack how to make this possible ?ThanksLars -Ursprüngliche Nachricht-Von: Scott Ullrich [mailto:[EMAIL PROTECTED]]Gesendet: Sonntag, 4. September 2005 15:24An: Leuchter, LarsCc: support@pfsense.comBetreff: Re: [pfSense Support] Soekris Net4801Change your compact flash to primary in the BIOS. There is a blog entry for this as well.ScottOn 9/4/05, Leuchter, Lars < [EMAIL PROTECTED]> wrote:>> Hi all,>> I am trying to get the latest embedded image to work on a Soekris> Net4801, however, after I have written the image to flash-card and > boot it up, I do get the following error message :>> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0> sio0: type 16550A, console> sio1 at port 0x2f8-0x2ff irq 3 on isa0> sio1: type 16550A > Timecounters tick every 1.000 msec> Fast IPsec: Initialized Security Association Processing.> ad1: 497MB at ata0-slave PIO4 Trying to> mount root from ufs:/dev/ad0a >> Manual root filesystem specification:> : Mount using filesystem >eg. ufs:da0s1a> ? List valid disk boot devices> Abort manual input>> mountroot Any idea ?>>> Thanks> Lars>- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
AW: [pfSense Support] Soekris Net4801
Hi Scott Do you refer to the set flash=primary reboot ?? If so, it doesn´t work, at least when using a 512MB Flash-Card. Is there another hack how to make this possible ? Thanks Lars -Ursprüngliche Nachricht- Von: Scott Ullrich [mailto:[EMAIL PROTECTED] Gesendet: Sonntag, 4. September 2005 15:24 An: Leuchter, Lars Cc: support@pfsense.com Betreff: Re: [pfSense Support] Soekris Net4801 Change your compact flash to primary in the BIOS. There is a blog entry for this as well. Scott On 9/4/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: > > Hi all, > > I am trying to get the latest embedded image to work on a Soekris > Net4801, however, after I have written the image to flash-card and > boot it up, I do get the following error message : > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > Timecounters tick every 1.000 msec > Fast IPsec: Initialized Security Association Processing. > ad1: 497MB at ata0-slave PIO4 Trying to > mount root from ufs:/dev/ad0a > > Manual root filesystem specification: > : Mount using filesystem >eg. ufs:da0s1a > ? List valid disk boot devices > Abort manual input > > mountroot> > > > Any idea ? > > > Thanks > Lars > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re: [pfSense Support] Soekris Net4801
Hi, I'm a newb. of pfsense. I tried to install the pfSense-Embedded-0.82.2. on the Net4801 using a 256MB CF and I got the following output. It seems the CF is set as Primary. If I,instead, use a 128MB CF the appliance starts correctly. Tell me if I can give you some more debug. Luciano omBIOS ver. 1.27 20041122 Copyright (C) 2000-2004 Soekris Engineering. net4801 0128 Mbyte MemoryCPU Geode 266 Mhz Pri Sla HYPERSTONE FLASH DISK LBA 988-16-32 253 Mbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1Base2 Int --- ... 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA3 #0: Thu Sep 1 00:01:25 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/pfSense_wrap.6 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Geode(TM) Integrated Processor by National Semi (266.66-MHz 586-class CPU) Origin = "Geode by NSC" Id = 0x540 Stepping = 0 Features=0x808131 real memory = 134217728 (128 MB) avail memory = 121917440 (116 MB) wlan: mac acl policy registered ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) npx0: [FAST] npx0: on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 sis0: port 0xe100-0xe1ff mem 0xa000-0xa000 0fff irq 10 at device 6.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: on sis0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:00:24:c4:80:00 sis1: port 0xe200-0xe2ff mem 0xa0001000-0xa000 1fff irq 10 at device 7.0 on pci0 sis1: Silicon Revision: DP83816A miibus1: on sis1 ukphy1: on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis1: Ethernet address: 00:00:24:c4:80:01 sis2: port 0xe300-0xe3ff mem 0xa0002000-0xa000 2fff irq 10 at device 8.0 on pci0 sis2: Silicon Revision: DP83816A miibus2: on sis2 ukphy2: on miibus2 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis2: Ethernet address: 00:00:24:c4:80:02 Geode GPIO@ = 6100 Geode Soekris net4801 comBIOS ver. 1.27 20041122 Copyright (C) 2000-2004 isab0: port 0x6100-0x613f,0x6200-0x623f at device 18.0 on pci0 isa0: on isab0 pci0: at device 18.1 (no driver attached) atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0 x177,0x376,0xe000-0xe00f at device 18.2 on pci0 ata0: on atapci0 ata1: on atapci0 Geode CBA@ 0x6000 Geode rev: 06 03 Timecounter "Geode" frequency 2700 Hz quality 1000 pci0: at device 18.5 (no driver attached) ohci0: mem 0xa0003000-0xa0003fff irq 11 at devic e 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered pmtimer0 on isa0 orm0: at iomem 0xc8000-0xd0fff on isa0 ppc0: parallel port not found. sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A Timecounters tick every 1.000 msec Fast IPsec: Initialized Security Association Processing. ad1: FAILURE - SETFEATURES SET TRANSFER MODE status=51 error=4< ABORTED> ad1: 247MB at ata0-slave BIOSPIO Trying to mount root from ufs:/dev/ad0a Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disk boot devices Abort manual input mountroot> ? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re: [pfSense Support] Soekris Net4801
In this case you need to use the installer to install to the media. Afterwards change /etc/platform to wrap Scott On 9/4/05, David Strout <[EMAIL PROTECTED]> wrote: > I get the VERY same message when trying the image > on a Advantech FWA-3680. > > http://www.advantech.com.tw/products/Model_Detail.asp?model_id=1-U89SJ&BU=NCG&PD= > or > http://partner.advantech.com.tw/epartner/Files/Temp/1-BS37P-3.pdf > > The problem I have w/ the Advantech appliance is > that there is no way of changing the CF slot to > primary, as on this platform there are several > options in the BIOS for booting and as far as I > can tell they are all static. You can certainly > choose what the preferred boot device is but when > choosing HDD-0, HDD-1, HDD-2, HDD-4 I get the same > results as the booting error below. I have even > tried to boot manually after autobooting fails w/ > a command ufs:/dev/ad1a, ufs:/dev/ad2a and soo on, > but to no avail. > > Anyone experienced w/ Advantech products? I can > provide screen shoots of the BIOS config screens > if you like. > > P.S. I DO NOT have the original documentation to > the unit as it was a left over from previous lab > mantainer. > > Thanks in advance !! > > > Change your compact flash to primary in the > BIOS. There is a blog > > entry for this as well. > > > > Scott > > > > get the following error message : > > > > Trying to mount root from ufs:/dev/ad0a > > > > > > Manual root filesystem specification: > > > : Mount using > filesystem > > >eg. ufs:da0s1a > > > ? List valid disk boot > devices > > > Abort manual input > > > > > > mountroot> > > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Soekris Net4801 - CORRECTION
It's not a FreeBSD issue. The embedded images are set to boot from ad0 (primary ide hd). Scott On 9/4/05, alan walters <[EMAIL PROTECTED]> wrote: > > > > > Sorry FWA-3660-02 > > > > > I get the VERY same message when trying the > > image > > > on a Advantech FWA-3680. > > > [alan walters] > Similar problem here with a via 1000 mhz embedded board ou cannot set > the cf to primary. I guess this is really a freebsd 6 issue still? > > Regards > > alan > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] Soekris Net4801 - CORRECTION
> > Sorry FWA-3660-02 > > > I get the VERY same message when trying the > image > > on a Advantech FWA-3680. > [alan walters] Similar problem here with a via 1000 mhz embedded board ou cannot set the cf to primary. I guess this is really a freebsd 6 issue still? Regards alan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Soekris Net4801 - CORRECTION
Sorry FWA-3660-02 > I get the VERY same message when trying the image > on a Advantech FWA-3680. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re: [pfSense Support] Soekris Net4801
I get the VERY same message when trying the image on a Advantech FWA-3680. http://www.advantech.com.tw/products/Model_Detail.asp?model_id=1-U89SJ&BU=NCG&PD= or http://partner.advantech.com.tw/epartner/Files/Temp/1-BS37P-3.pdf The problem I have w/ the Advantech appliance is that there is no way of changing the CF slot to primary, as on this platform there are several options in the BIOS for booting and as far as I can tell they are all static. You can certainly choose what the preferred boot device is but when choosing HDD-0, HDD-1, HDD-2, HDD-4 I get the same results as the booting error below. I have even tried to boot manually after autobooting fails w/ a command ufs:/dev/ad1a, ufs:/dev/ad2a and soo on, but to no avail. Anyone experienced w/ Advantech products? I can provide screen shoots of the BIOS config screens if you like. P.S. I DO NOT have the original documentation to the unit as it was a left over from previous lab mantainer. Thanks in advance !! > Change your compact flash to primary in the BIOS. There is a blog > entry for this as well. > > Scott > > get the following error message : > > Trying to mount root from ufs:/dev/ad0a > > > > Manual root filesystem specification: > > : Mount using filesystem > >eg. ufs:da0s1a > > ? List valid disk boot devices > > Abort manual input > > > > mountroot> - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Soekris Net4801
Change your compact flash to primary in the BIOS. There is a blog entry for this as well. Scott On 9/4/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: > > Hi all, > > I am trying to get the latest embedded image to work on a Soekris Net4801, > however, after I have written the image to flash-card and boot it up, I do > get the following error message : > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > Timecounters tick every 1.000 msec > Fast IPsec: Initialized Security Association Processing. > ad1: 497MB at ata0-slave PIO4 > Trying to mount root from ufs:/dev/ad0a > > Manual root filesystem specification: > : Mount using filesystem >eg. ufs:da0s1a > ? List valid disk boot devices > Abort manual input > > mountroot> > > > Any idea ? > > > Thanks > Lars > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] Soekris Net4801
Hi all, I am trying to get the latest embedded image to work on a Soekris Net4801, however, after I have written the image to flash-card and boot it up, I do get the following error message : sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0sio0: type 16550A, consolesio1 at port 0x2f8-0x2ff irq 3 on isa0sio1: type 16550ATimecounters tick every 1.000 msecFast IPsec: Initialized Security Association Processing.ad1: 497MB at ata0-slave PIO4Trying to mount root from ufs:/dev/ad0a Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disk boot devices Abort manual input mountroot> Any idea ? Thanks Lars
