Re: [pfSense Support] PPPoE gets disconnected on WAN port
On Tue, Jun 10, 2008 at 10:56 AM, Olivier Mueller [EMAIL PROTECTED] wrote: And nothing anymore in the logs. Do you thing the set bundle no noretry helped here, or is it just luck? Without question, based on what I found when I initially recommended that. That's a setting needed in newer mpd versions that wasn't previously required, which is why it wasn't there already. It'll be in 1.2.1 and all future releases. http://cvstrac.pfsense.org/chngview?cn=22890 - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
Hi,
On Sat, 2008-05-17 at 23:14 -0400, Chris Buechler wrote:
Try what I suggested previously:
Open up /etc/inc/interfaces.inc in Diagnostics - Edit, and go down to under:
set bundle disable multilink
set bundle authname {$pppoecfg['username']}
set bundle password {$pppoecfg['password']}
which is line 1242, and add the following line beneath that:
set bundle no noretry
yes, I did that then, and now it's stable again since about 3 days
(but this happened also before). Let's see if remains like that a bit
longer :)
Last PPPoE related messages in the logs were:
May 15 10:15:59 gateway mpd: [pppoe] PPPoE connection successful
May 15 10:52:12 gateway mpd: [pppoe] PPPoE connection successful
Thanks regards,
Olivier
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
On Sun, May 18, 2008 at 5:26 AM, Olivier Mueller [EMAIL PROTECTED] wrote: yes, I did that then, and now it's stable again since about 3 days (but this happened also before). Let's see if remains like that a bit longer :) Based on what I found when I provided that, I think it will fix your issue. Please let us know if it's still working in a few days, and we'll get that fix in 1.2.1 and all future releases. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
On Thu, May 15, 2008 at 4:32 AM, Olivier Mueller
[EMAIL PROTECTED] wrote:
It worked about 5 days without problems, then it started again:
Try what I suggested previously:
---
Open up /etc/inc/interfaces.inc in Diagnostics - Edit, and go down to under:
set bundle disable multilink
set bundle authname {$pppoecfg['username']}
set bundle password {$pppoecfg['password']}
which is line 1242, and add the following line beneath that:
set bundle no noretry
Then save the file and reboot. Let us know if that makes any difference.
---
Maybe are the devices not strong enough of a small office
LAN with about 15 people?(pfSense is on an Alix Board box)
That's far more power than you need, unless you need to push 100+ Mb.
This isn't indicative of overloaded hardware, I think the above will
fix your problem.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
Hello, On Tue, 2008-04-29 at 19:08 -0400, Chris Buechler wrote: On Tue, Apr 29, 2008 at 8:44 AM, Olivier Mueller [EMAIL PROTECTED] wrote: Short update about my issues: Thanks for your feedback (and also to David). I couldn't try the commands yet because the device was remote and people were working, but I will keep them around in case the problems are coming back. This still might be something that is required. It seems we're missing the mpd config option for auto reconnect on PPPoE. But if it's working fine again now it must be OK, a flaky modem could have just as easily caused the scenario you were seeing. Let us know if the problem recurs. It worked about 5 days without problems, then it started again: Apr 30 11:17:38 gateway mpd: [pppoe] PPPoE connection closed May 5 11:18:56 gateway mpd: [pppoe] PPPoE connection closed May 8 11:17:57 gateway mpd: [pppoe] PPPoE connection closed May 9 11:14:30 gateway mpd: [pppoe] PPPoE connection closed May 9 11:51:18 gateway mpd: [pppoe] PPPoE connection closed May 13 09:56:03 gateway mpd: [pppoe] PPPoE connection closed May 13 12:28:51 gateway mpd: [pppoe] PPPoE connection closed May 14 23:13:23 gateway mpd: [pppoe] PPPoE connection closed May 15 10:06:19 gateway mpd: [pppoe] PPPoE connection closed May 15 10:13:36 gateway mpd: [pppoe] PPPoE connection closed Replacing/Resetting the VDSL Router (bridge) didn't helped. Maybe are the devices not strong enough of a small office LAN with about 15 people?(pfSense is on an Alix Board box) I'll check again with the ISP, but I guess the problem is local. The question is just where to search for it :) regards, Olivier - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
Short update about my issues:
On Wed, 2008-04-16 at 17:45 -0400, Chris Buechler wrote:
Since the situation has not improved, I'm re-posting this :-(
If you have any idea what I could/should try, it would be very nice...
At the moment I have about 3-4 disconnects per day, and according to the
ISP everything is fine (line, etc.)
Open up /etc/inc/interfaces.inc in Diagnostics - Edit, and go down to under:
set bundle disable multilink
set bundle authname {$pppoecfg['username']}
set bundle password {$pppoecfg['password']}
which is line 1242, and add the following line beneath that:
set bundle no noretry
Then save the file and reboot. Let us know if that makes any difference.
Thanks for your feedback (and also to David). I couldn't try the
commands yet because the device was remote and people were working, but
I will keep them around in case the problems are coming back.
Because since about one week, I replaced and made a full reset on the
Zyxel VDSL modem/bridge, and no more issues the last 5 days and nights.
So it seems it wasn't a pfsense issue after all... :) But at least I
know how to debug this kind of problems the next time, merci!
regards from Switzerland,
Olivier
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
On Tue, Apr 29, 2008 at 8:44 AM, Olivier Mueller [EMAIL PROTECTED] wrote: Short update about my issues: Thanks for your feedback (and also to David). I couldn't try the commands yet because the device was remote and people were working, but I will keep them around in case the problems are coming back. This still might be something that is required. It seems we're missing the mpd config option for auto reconnect on PPPoE. But if it's working fine again now it must be OK, a flaky modem could have just as easily caused the scenario you were seeing. Let us know if the problem recurs. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
Hello... Since the situation has not improved, I'm re-posting this :-( If you have any idea what I could/should try, it would be very nice... At the moment I have about 3-4 disconnects per day, and according to the ISP everything is fine (line, etc.) thanks regards, Olivier On Mon, 2008-04-07 at 11:46 +0200, Olivier Mueller wrote: On Tue, 2008-04-01 at 09:14 +0200, Olivier Mueller wrote: On Tue, 2008-04-01 at 08:46 +0200, Olivier Mueller wrote: pfSense Version: 1.2-Release. Still looking for a solution too... :) Activated syslog to a remote pc to be able to debug this problem if it occurs again today. Et voila, it just happened again: And about 2-3 times this weekend and 2 times this morning... Apr 7 09:20:28 gw mpd: [pppoe] PPPoE connection closed Apr 7 09:20:28 gw mpd: [pppoe] device: DOWN event in state UP Apr 7 09:20:28 gw mpd: [pppoe] device is now in state DOWN Apr 7 09:20:28 gw mpd: [pppoe] link: DOWN event Apr 7 09:20:28 gw mpd: [pppoe] LCP: Down event Apr 7 09:20:28 gw mpd: [pppoe] LCP: state change Opened -- Starting Apr 7 09:20:28 gw mpd: [pppoe] LCP: phase shift NETWORK -- DEAD Apr 7 09:20:28 gw mpd: [pppoe] setting interface ng0 MTU to 1500 bytes Apr 7 09:20:28 gw mpd: [pppoe] up: 0 links, total bandwidth 9600 bps Apr 7 09:20:28 gw mpd: [pppoe] IPCP: Down event Apr 7 09:20:28 gw mpd: [pppoe] IPCP: state change Opened -- Starting Apr 7 09:20:28 gw mpd: [pppoe] IPCP: LayerDown Apr 7 09:20:28 gw mpd: [pppoe] IFACE: Down event According to the Zyxel VDSL router, the dsl link was always up... Is there any way to debug that a bit deeper? Without the pfsense box it worked fine, without pppoE disconnects, so I guess it's pfsense-related. thanks regards, Olivier - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
Olivier Have you tried successively issuing the commands ifconfig em0 down ifconfig em0 up from http://[LANIP]/exec.php where em0 is your WAN interface Give that a try and see what happens and do let us know please. Kind regards David Hingston - Original Message - From: Olivier Mueller [EMAIL PROTECTED] To: support@pfsense.com Sent: Thursday, April 17, 2008 1:46 AM Subject: Re: [pfSense Support] PPPoE gets disconnected on WAN port Hello... Since the situation has not improved, I'm re-posting this :-( If you have any idea what I could/should try, it would be very nice... At the moment I have about 3-4 disconnects per day, and according to the ISP everything is fine (line, etc.) thanks regards, Olivier On Mon, 2008-04-07 at 11:46 +0200, Olivier Mueller wrote: On Tue, 2008-04-01 at 09:14 +0200, Olivier Mueller wrote: On Tue, 2008-04-01 at 08:46 +0200, Olivier Mueller wrote: pfSense Version: 1.2-Release. Still looking for a solution too... :) Activated syslog to a remote pc to be able to debug this problem if it occurs again today. Et voila, it just happened again: And about 2-3 times this weekend and 2 times this morning... Apr 7 09:20:28 gw mpd: [pppoe] PPPoE connection closed Apr 7 09:20:28 gw mpd: [pppoe] device: DOWN event in state UP Apr 7 09:20:28 gw mpd: [pppoe] device is now in state DOWN Apr 7 09:20:28 gw mpd: [pppoe] link: DOWN event Apr 7 09:20:28 gw mpd: [pppoe] LCP: Down event Apr 7 09:20:28 gw mpd: [pppoe] LCP: state change Opened -- Starting Apr 7 09:20:28 gw mpd: [pppoe] LCP: phase shift NETWORK -- DEAD Apr 7 09:20:28 gw mpd: [pppoe] setting interface ng0 MTU to 1500 bytes Apr 7 09:20:28 gw mpd: [pppoe] up: 0 links, total bandwidth 9600 bps Apr 7 09:20:28 gw mpd: [pppoe] IPCP: Down event Apr 7 09:20:28 gw mpd: [pppoe] IPCP: state change Opened -- Starting Apr 7 09:20:28 gw mpd: [pppoe] IPCP: LayerDown Apr 7 09:20:28 gw mpd: [pppoe] IFACE: Down event According to the Zyxel VDSL router, the dsl link was always up... Is there any way to debug that a bit deeper? Without the pfsense box it worked fine, without pppoE disconnects, so I guess it's pfsense-related. thanks regards, Olivier - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
Also what are you guys respective NIC's brand, model and chip? Kind regards David Hingston - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
On Wed, Apr 16, 2008 at 9:46 AM, Olivier Mueller
[EMAIL PROTECTED] wrote:
Hello...
Since the situation has not improved, I'm re-posting this :-(
If you have any idea what I could/should try, it would be very nice...
At the moment I have about 3-4 disconnects per day, and according to the
ISP everything is fine (line, etc.)
Open up /etc/inc/interfaces.inc in Diagnostics - Edit, and go down to under:
set bundle disable multilink
set bundle authname {$pppoecfg['username']}
set bundle password {$pppoecfg['password']}
which is line 1242, and add the following line beneath that:
set bundle no noretry
Then save the file and reboot. Let us know if that makes any difference.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
On Tue, 2008-04-01 at 08:46 +0200, Olivier Mueller wrote: pfSense Version: 1.2-Release. Still looking for a solution too... :) Activated syslog to a remote pc to be able to debug this problem if it occurs again today. Et voila, it just happened again: Apr 1 08:39:34 gw kernel: pflog0: promiscuous mode disabled Apr 1 08:39:34 gw login: login on console as root Apr 1 08:39:34 gw kernel: pflog0: promiscuous mode enabled Apr 1 08:53:00 gw mpd: [pppoe] PPPoE connection closed Apr 1 08:53:00 gw mpd: [pppoe] device: DOWN event in state UP Apr 1 08:53:00 gw mpd: [pppoe] device is now in state DOWN Apr 1 08:53:00 gw mpd: [pppoe] link: DOWN event Apr 1 08:53:00 gw mpd: [pppoe] LCP: Down event Apr 1 08:53:00 gw mpd: [pppoe] LCP: state change Opened -- Starting Apr 1 08:53:00 gw mpd: [pppoe] LCP: phase shift NETWORK -- DEAD Apr 1 08:53:00 gw mpd: [pppoe] setting interface ng0 MTU to 1500 bytes Apr 1 08:53:00 gw mpd: [pppoe] up: 0 links, total bandwidth 9600 bps Apr 1 08:53:00 gw mpd: [pppoe] IPCP: Down event Apr 1 08:53:00 gw mpd: [pppoe] IPCP: state change Opened -- Starting Apr 1 08:53:00 gw mpd: [pppoe] IPCP: LayerDown Apr 1 08:53:00 gw mpd: [pppoe] IFACE: Down event Apr 1 08:53:00 gw mpd: [pppoe] exec: /sbin/route delete 0.0.0.0 80.254.x.y Apr 1 08:53:00 gw mpd: [pppoe] exec: /sbin/route delete 80.254.w.z -iface lo0 Apr 1 08:53:00 gw mpd: [pppoe] exec: /sbin/ifconfig ng0 down delete -link0 Apr 1 08:53:00 gw mpd: [pppoe] LCP: LayerDown Apr 1 08:53:00 gw mpd: [pppoe] device: OPEN event in state DOWN Apr 1 08:53:00 gw mpd: [pppoe] pausing 6 seconds before open Apr 1 08:53:00 gw mpd: [pppoe] device is now in state DOWN Apr 1 08:53:03 gw mpd: [pppoe] closing link pppoe... Apr 1 08:53:03 gw mpd: [pppoe] link: CLOSE event Apr 1 08:53:03 gw mpd: [pppoe] LCP: Close event Apr 1 08:53:03 gw mpd: [pppoe] LCP: state change Starting -- Initial Apr 1 08:53:03 gw mpd: [pppoe] LCP: LayerFinish Apr 1 08:53:03 gw mpd: [pppoe] device: CLOSE event in state DOWN Apr 1 08:53:03 gw mpd: [pppoe] device is now in state DOWN Apr 1 08:53:06 gw mpd: [pppoe] opening link pppoe... [...] Apr 1 08:56:54 gw mpd: [pppoe] device is now in state DOWN Apr 1 08:56:58 gw mpd: [pppoe] device: OPEN event in state DOWN Apr 1 08:56:58 gw mpd: [pppoe] pausing 1 seconds before open Apr 1 08:56:58 gw mpd: [pppoe] device is now in state DOWN Apr 1 08:56:59 gw mpd: [pppoe] device: OPEN event in state DOWN Apr 1 08:56:59 gw mpd: [pppoe] device is now in state OPENING Apr 1 08:56:59 gw mpd: [pppoe] rec'd ACNAME ipc-zhb790-r-br-03 Apr 1 08:56:59 gw mpd: [pppoe] PPPoE connection successful Apr 1 08:56:59 gw mpd: [pppoe] device: UP event in state OPENING Apr 1 08:56:59 gw mpd: [pppoe] device is now in state UP Apr 1 08:56:59 gw mpd: [pppoe] link: UP event Apr 1 08:56:59 gw mpd: [pppoe] link: origination is local Apr 1 08:56:59 gw mpd: [pppoe] LCP: Up event Apr 1 08:56:59 gw mpd: [pppoe] LCP: state change Starting -- Req-Sent Apr 1 08:56:59 gw mpd: [pppoe] LCP: phase shift DEAD -- ESTABLISH Apr 1 08:56:59 gw mpd: [pppoe] LCP: SendConfigReq #12 Apr 1 08:56:59 gw mpd: MRU 1492 Apr 1 08:56:59 gw mpd: MAGICNUM ce56dc0c [...] then Auth, IF Up, Rules reload, all services back online. According to the VDSL router, link was always up, so it should be an issue on the pfsense box? But where... ? At least the auto-reconnect worked this time :-) regards, Olivier - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] PPPoE gets disconnected on WAN port
BAD MTU tester wrote: Hello, sometimes PPPoE gets disconnected on WAN port of my pfSense's box and I have to click several times (at least twenty ones) on Reconnect button in 'webConfigurator-Status-Interfaces-WAN'. I want ask you two things are still unclear to me: 1- does pfSense automatically attempt to reconnect PPPoE itself? If not, is it possible to add auto-reconnect mechanism by using for example a script or tuning a config file? Because it is annoying when Internet connection drops and you are hundreds miles away and nobody can restart pfSense. 2- where I can read why PPPoE got disconnected? I saw no entry about it in System Logs and I'm curious to understand if there is a problem with my box or it is the ISP which renew my dynamic IP. I'm using 1.2RC4 on embedded platform. I didn't update to the final 1.2 yet, but if something related to PPPoE has been changed, tell me and I update the box, otherwise I'd prefer not to touch it at the moment. Thank you! ___ Yahoo! For Good helps you make a difference http://uk.promotions.yahoo.com/forgood/ - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
