Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
When the squid package has installed properly without any errors type: # pfctl -sr | grep rdr if that returns a rule and trans.proxy still doesn't work (make sure the squid process is running) then I would suggest you read the squid logs to findout why it doesn't cache. /bkw On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > Hi! > > The rdr (nat) rule for squid transparent proxy is > missing on pfsense 0.76.2 which causes transparent > proxying NOT to function properly. The corresponding > pass rules are present however. > > The problem is corrected by commenting out line# 1134 > of /etc/inc/filter.inc: > > if (is_package_installed("squid") == 1) > //if (is_process_running("squid")) > > Could it be because this function was called at the > time when squid has not fully loaded itself? If this > is the case, then it would be better if the rc loader > for squid be given enough time to "sleep" for a while > before exiting. > > Thanks. > > Miles > > __ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > -- ## BKW - Bachman Kharazmi bahkha AT gmail DOT com uin: #24089491 SWEDEN ## - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
I think it is actually a BUG in the script /etc/inc/filter.inc that checks for the squid process at boot time which will return FALSE because no package is loaded during this time yet. See the /etc/rc script for the loading sequence. The /etc/rc.bootup script that initializes the pf rules is called before executing rc.d items. Please see the /etc/rc script. As a solution, the "if(is_process_running("squid"))" at line no. 1134 of the file /etc/inc/filter.inc must be commented out. Cheers! --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > When the squid package has installed properly > without any errors type: > # pfctl -sr | grep rdr > if that returns a rule and trans.proxy still doesn't > work (make sure > the squid process is running) then I would suggest > you read the squid > logs to findout why it doesn't cache. > > /bkw > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > wrote: > > Hi! > > > > The rdr (nat) rule for squid transparent proxy is > > missing on pfsense 0.76.2 which causes transparent > > proxying NOT to function properly. The > corresponding > > pass rules are present however. > > > > The problem is corrected by commenting out line# > 1134 > > of /etc/inc/filter.inc: > > > > if (is_package_installed("squid") == 1) > > //if (is_process_running("squid")) > > > > Could it be because this function was called at > the > > time when squid has not fully loaded itself? If > this > > is the case, then it would be better if the rc > loader > > for squid be given enough time to "sleep" for a > while > > before exiting. > > > > Thanks. > > > > Miles > > > > __ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > protection around > > http://mail.yahoo.com > > > > > - > > To unsubscribe, e-mail: > [EMAIL PROTECTED] > > For additional commands, e-mail: > [EMAIL PROTECTED] > > > > > > > -- > ## > BKW - Bachman Kharazmi > bahkha AT gmail DOT com > uin: #24089491 > SWEDEN > ## > > - > To unsubscribe, e-mail: > [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] > > Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
Albert, can you file a ticket on this at http://cvstrac.pfsense.com/ ? I'd rather not delay boot until squid is up, but I suppose that's open for debate. Without looking at the code, I'm wondering if we're even starting up squid before the filter. Can you insert a sleep(); statement before the is_process_running statement and tell us how long you have to sleep for to get reliable results? Also, what speed hardware is this on? Thanks --Bill On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > I think it is actually a BUG in the script > /etc/inc/filter.inc that checks for the squid process > at boot time which will return FALSE because no > package is loaded during this time yet. See the > /etc/rc script for the loading sequence. > > The /etc/rc.bootup script that initializes the pf > rules is called before executing rc.d items. Please > see the /etc/rc script. > > As a solution, the "if(is_process_running("squid"))" > at line no. 1134 of the file /etc/inc/filter.inc must > be commented out. > > Cheers! > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > When the squid package has installed properly > > without any errors type: > > # pfctl -sr | grep rdr > > if that returns a rule and trans.proxy still doesn't > > work (make sure > > the squid process is running) then I would suggest > > you read the squid > > logs to findout why it doesn't cache. > > > > /bkw > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > wrote: > > > Hi! > > > > > > The rdr (nat) rule for squid transparent proxy is > > > missing on pfsense 0.76.2 which causes transparent > > > proxying NOT to function properly. The > > corresponding > > > pass rules are present however. > > > > > > The problem is corrected by commenting out line# > > 1134 > > > of /etc/inc/filter.inc: > > > > > > if (is_package_installed("squid") == 1) > > > //if (is_process_running("squid")) > > > > > > Could it be because this function was called at > > the > > > time when squid has not fully loaded itself? If > > this > > > is the case, then it would be better if the rc > > loader > > > for squid be given enough time to "sleep" for a > > while > > > before exiting. > > > > > > Thanks. > > > > > > Miles > > > > > > __ > > > Do You Yahoo!? > > > Tired of spam? Yahoo! Mail has the best spam > > protection around > > > http://mail.yahoo.com > > > > > > > > > - > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > > > > > -- > > ## > > BKW - Bachman Kharazmi > > bahkha AT gmail DOT com > > uin: #24089491 > > SWEDEN > > ## > > > > > - > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > > > Start your day with Yahoo! - make it your home page > http://www.yahoo.com/r/hs > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
The solution here is to set the filter dirty flag in the squid startup script. This will force the rules to be reloaded and then squid will be running. I'll take care of it shortly. Scott On 8/16/05, Bill Marquette <[EMAIL PROTECTED]> wrote: > Albert, can you file a ticket on this at http://cvstrac.pfsense.com/ ? > I'd rather not delay boot until squid is up, but I suppose that's open > for debate. Without looking at the code, I'm wondering if we're even > starting up squid before the filter. > Can you insert a sleep(); statement before the is_process_running > statement and tell us how long you have to sleep for to get reliable > results? Also, what speed hardware is this on? Thanks > > --Bill > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > > I think it is actually a BUG in the script > > /etc/inc/filter.inc that checks for the squid process > > at boot time which will return FALSE because no > > package is loaded during this time yet. See the > > /etc/rc script for the loading sequence. > > > > The /etc/rc.bootup script that initializes the pf > > rules is called before executing rc.d items. Please > > see the /etc/rc script. > > > > As a solution, the "if(is_process_running("squid"))" > > at line no. 1134 of the file /etc/inc/filter.inc must > > be commented out. > > > > Cheers! > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > When the squid package has installed properly > > > without any errors type: > > > # pfctl -sr | grep rdr > > > if that returns a rule and trans.proxy still doesn't > > > work (make sure > > > the squid process is running) then I would suggest > > > you read the squid > > > logs to findout why it doesn't cache. > > > > > > /bkw > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > > wrote: > > > > Hi! > > > > > > > > The rdr (nat) rule for squid transparent proxy is > > > > missing on pfsense 0.76.2 which causes transparent > > > > proxying NOT to function properly. The > > > corresponding > > > > pass rules are present however. > > > > > > > > The problem is corrected by commenting out line# > > > 1134 > > > > of /etc/inc/filter.inc: > > > > > > > > if (is_package_installed("squid") == 1) > > > > //if (is_process_running("squid")) > > > > > > > > Could it be because this function was called at > > > the > > > > time when squid has not fully loaded itself? If > > > this > > > > is the case, then it would be better if the rc > > > loader > > > > for squid be given enough time to "sleep" for a > > > while > > > > before exiting. > > > > > > > > Thanks. > > > > > > > > Miles > > > > > > > > __ > > > > Do You Yahoo!? > > > > Tired of spam? Yahoo! Mail has the best spam > > > protection around > > > > http://mail.yahoo.com > > > > > > > > > > > > > - > > > > To unsubscribe, e-mail: > > > [EMAIL PROTECTED] > > > > For additional commands, e-mail: > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > -- > > > ## > > > BKW - Bachman Kharazmi > > > bahkha AT gmail DOT com > > > uin: #24089491 > > > SWEDEN > > > ## > > > > > > > > - > > > To unsubscribe, e-mail: > > > [EMAIL PROTECTED] > > > For additional commands, e-mail: > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > Start your day with Yahoo! - make it your home page > > http://www.yahoo.com/r/hs > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
No need to file a ticket. Thanks for the swift action. I'll wait till next release then. Also, I am concerned of the Squid process dying for any reason and the rdr rule for transparent proxying is still in effect. This will block http traffic to the internet. Any solution for this? Thanks again. Miles --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > The solution here is to set the filter dirty flag in > the squid startup > script. This will force the rules to be reloaded > and then squid will > be running. > > I'll take care of it shortly. > > Scott > > > On 8/16/05, Bill Marquette > <[EMAIL PROTECTED]> wrote: > > Albert, can you file a ticket on this at > http://cvstrac.pfsense.com/ ? > > I'd rather not delay boot until squid is up, but I > suppose that's open > > for debate. Without looking at the code, I'm > wondering if we're even > > starting up squid before the filter. > > Can you insert a sleep(); statement before the > is_process_running > > statement and tell us how long you have to sleep > for to get reliable > > results? Also, what speed hardware is this on? > Thanks > > > > --Bill > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > wrote: > > > I think it is actually a BUG in the script > > > /etc/inc/filter.inc that checks for the squid > process > > > at boot time which will return FALSE because no > > > package is loaded during this time yet. See the > > > /etc/rc script for the loading sequence. > > > > > > The /etc/rc.bootup script that initializes the > pf > > > rules is called before executing rc.d items. > Please > > > see the /etc/rc script. > > > > > > As a solution, the > "if(is_process_running("squid"))" > > > at line no. 1134 of the file /etc/inc/filter.inc > must > > > be commented out. > > > > > > Cheers! > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > > > When the squid package has installed properly > > > > without any errors type: > > > > # pfctl -sr | grep rdr > > > > if that returns a rule and trans.proxy still > doesn't > > > > work (make sure > > > > the squid process is running) then I would > suggest > > > > you read the squid > > > > logs to findout why it doesn't cache. > > > > > > > > /bkw > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > <[EMAIL PROTECTED]> > > > > wrote: > > > > > Hi! > > > > > > > > > > The rdr (nat) rule for squid transparent > proxy is > > > > > missing on pfsense 0.76.2 which causes > transparent > > > > > proxying NOT to function properly. The > > > > corresponding > > > > > pass rules are present however. > > > > > > > > > > The problem is corrected by commenting out > line# > > > > 1134 > > > > > of /etc/inc/filter.inc: > > > > > > > > > > if (is_package_installed("squid") == > 1) > > > > > //if > (is_process_running("squid")) > > > > > > > > > > Could it be because this function was called > at > > > > the > > > > > time when squid has not fully loaded itself? > If > > > > this > > > > > is the case, then it would be better if the > rc > > > > loader > > > > > for squid be given enough time to "sleep" > for a > > > > while > > > > > before exiting. > > > > > > > > > > Thanks. > > > > > > > > > > Miles > > > > > > > > > > > __ > > > > > Do You Yahoo!? > > > > > Tired of spam? Yahoo! Mail has the best > spam > > > > protection around > > > > > http://mail.yahoo.com > > > > > > > > > > > > > > > > > > - > > > > > To unsubscribe, e-mail: > > > > [EMAIL PROTECTED] > > > > > For additional commands, e-mail: > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > -- > > > > ## > > > > BKW - Bachman Kharazmi > > > > bahkha AT gmail DOT com > > > > uin: #24089491 > > > > SWEDEN > > > > ## > > > > > > > > > > > > - > > > > To unsubscribe, e-mail: > > > > [EMAIL PROTECTED] > > > > For additional commands, e-mail: > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > Start your day with Yahoo! - make it your home > page > > > http://www.yahoo.com/r/hs > > > > > > > > > > - > > > To unsubscribe, e-mail: > [EMAIL PROTECTED] > > > For additional commands, e-mail: > [EMAIL PROTECTED] > > > > > > > > > > > - > > To unsubscribe, e-mail: > [EMAIL PROTECTED] > > For additional commands, e-mail: > [EMAIL PROTECTED] > > > > > Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTE
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
SQUID should not be dying. If it is then I need to deactivate the package until a new one is released on the freebsd site. Scott On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > No need to file a ticket. Thanks for the swift action. > I'll wait till next release then. > > Also, I am concerned of the Squid process dying for > any reason and the rdr rule for transparent proxying > is still in effect. This will block http traffic to > the internet. Any solution for this? > > Thanks again. > > Miles > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > The solution here is to set the filter dirty flag in > > the squid startup > > script. This will force the rules to be reloaded > > and then squid will > > be running. > > > > I'll take care of it shortly. > > > > Scott > > > > > > On 8/16/05, Bill Marquette > > <[EMAIL PROTECTED]> wrote: > > > Albert, can you file a ticket on this at > > http://cvstrac.pfsense.com/ ? > > > I'd rather not delay boot until squid is up, but I > > suppose that's open > > > for debate. Without looking at the code, I'm > > wondering if we're even > > > starting up squid before the filter. > > > Can you insert a sleep(); statement before the > > is_process_running > > > statement and tell us how long you have to sleep > > for to get reliable > > > results? Also, what speed hardware is this on? > > Thanks > > > > > > --Bill > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > wrote: > > > > I think it is actually a BUG in the script > > > > /etc/inc/filter.inc that checks for the squid > > process > > > > at boot time which will return FALSE because no > > > > package is loaded during this time yet. See the > > > > /etc/rc script for the loading sequence. > > > > > > > > The /etc/rc.bootup script that initializes the > > pf > > > > rules is called before executing rc.d items. > > Please > > > > see the /etc/rc script. > > > > > > > > As a solution, the > > "if(is_process_running("squid"))" > > > > at line no. 1134 of the file /etc/inc/filter.inc > > must > > > > be commented out. > > > > > > > > Cheers! > > > > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > > > > > When the squid package has installed properly > > > > > without any errors type: > > > > > # pfctl -sr | grep rdr > > > > > if that returns a rule and trans.proxy still > > doesn't > > > > > work (make sure > > > > > the squid process is running) then I would > > suggest > > > > > you read the squid > > > > > logs to findout why it doesn't cache. > > > > > > > > > > /bkw > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > > <[EMAIL PROTECTED]> > > > > > wrote: > > > > > > Hi! > > > > > > > > > > > > The rdr (nat) rule for squid transparent > > proxy is > > > > > > missing on pfsense 0.76.2 which causes > > transparent > > > > > > proxying NOT to function properly. The > > > > > corresponding > > > > > > pass rules are present however. > > > > > > > > > > > > The problem is corrected by commenting out > > line# > > > > > 1134 > > > > > > of /etc/inc/filter.inc: > > > > > > > > > > > > if (is_package_installed("squid") == > > 1) > > > > > > //if > > (is_process_running("squid")) > > > > > > > > > > > > Could it be because this function was called > > at > > > > > the > > > > > > time when squid has not fully loaded itself? > > If > > > > > this > > > > > > is the case, then it would be better if the > > rc > > > > > loader > > > > > > for squid be given enough time to "sleep" > > for a > > > > > while > > > > > > before exiting. > > > > > > > > > > > > Thanks. > > > > > > > > > > > > Miles > > > > > > > > > > > > > > __ > > > > > > Do You Yahoo!? > > > > > > Tired of spam? Yahoo! Mail has the best > > spam > > > > > protection around > > > > > > http://mail.yahoo.com > > > > > > > > > > > > > > > > > > > > > > > > - > > > > > > To unsubscribe, e-mail: > > > > > [EMAIL PROTECTED] > > > > > > For additional commands, e-mail: > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > ## > > > > > BKW - Bachman Kharazmi > > > > > bahkha AT gmail DOT com > > > > > uin: #24089491 > > > > > SWEDEN > > > > > ## > > > > > > > > > > > > > > > > > - > > > > > To unsubscribe, e-mail: > > > > > [EMAIL PROTECTED] > > > > > For additional commands, e-mail: > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Start your day with Yahoo! - make it your home > > page > > > > http://www.yahoo.com/r/hs > > > > > > > > > > > > > > > - > > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > > For additional commands, e-mail: >
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
I've now tried squid. I works well for me running 0.76.4 The installation succeeds and the squid process starts in right order. The rdr rules 'DOES' exist in my rules.debug and has been enabled. I've read all squid logs and it does transperant caching out of the box. Now I'll leave the process running for a few hours while using inet and see what happens... /bkw On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > SQUID should not be dying. If it is then I need to deactivate the > package until a new one is released on the freebsd site. > > Scott > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > > No need to file a ticket. Thanks for the swift action. > > I'll wait till next release then. > > > > Also, I am concerned of the Squid process dying for > > any reason and the rdr rule for transparent proxying > > is still in effect. This will block http traffic to > > the internet. Any solution for this? > > > > Thanks again. > > > > Miles > > > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > The solution here is to set the filter dirty flag in > > > the squid startup > > > script. This will force the rules to be reloaded > > > and then squid will > > > be running. > > > > > > I'll take care of it shortly. > > > > > > Scott > > > > > > > > > On 8/16/05, Bill Marquette > > > <[EMAIL PROTECTED]> wrote: > > > > Albert, can you file a ticket on this at > > > http://cvstrac.pfsense.com/ ? > > > > I'd rather not delay boot until squid is up, but I > > > suppose that's open > > > > for debate. Without looking at the code, I'm > > > wondering if we're even > > > > starting up squid before the filter. > > > > Can you insert a sleep(); statement before the > > > is_process_running > > > > statement and tell us how long you have to sleep > > > for to get reliable > > > > results? Also, what speed hardware is this on? > > > Thanks > > > > > > > > --Bill > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > > wrote: > > > > > I think it is actually a BUG in the script > > > > > /etc/inc/filter.inc that checks for the squid > > > process > > > > > at boot time which will return FALSE because no > > > > > package is loaded during this time yet. See the > > > > > /etc/rc script for the loading sequence. > > > > > > > > > > The /etc/rc.bootup script that initializes the > > > pf > > > > > rules is called before executing rc.d items. > > > Please > > > > > see the /etc/rc script. > > > > > > > > > > As a solution, the > > > "if(is_process_running("squid"))" > > > > > at line no. 1134 of the file /etc/inc/filter.inc > > > must > > > > > be commented out. > > > > > > > > > > Cheers! > > > > > > > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > When the squid package has installed properly > > > > > > without any errors type: > > > > > > # pfctl -sr | grep rdr > > > > > > if that returns a rule and trans.proxy still > > > doesn't > > > > > > work (make sure > > > > > > the squid process is running) then I would > > > suggest > > > > > > you read the squid > > > > > > logs to findout why it doesn't cache. > > > > > > > > > > > > /bkw > > > > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > > > <[EMAIL PROTECTED]> > > > > > > wrote: > > > > > > > Hi! > > > > > > > > > > > > > > The rdr (nat) rule for squid transparent > > > proxy is > > > > > > > missing on pfsense 0.76.2 which causes > > > transparent > > > > > > > proxying NOT to function properly. The > > > > > > corresponding > > > > > > > pass rules are present however. > > > > > > > > > > > > > > The problem is corrected by commenting out > > > line# > > > > > > 1134 > > > > > > > of /etc/inc/filter.inc: > > > > > > > > > > > > > > if (is_package_installed("squid") == > > > 1) > > > > > > > //if > > > (is_process_running("squid")) > > > > > > > > > > > > > > Could it be because this function was called > > > at > > > > > > the > > > > > > > time when squid has not fully loaded itself? > > > If > > > > > > this > > > > > > > is the case, then it would be better if the > > > rc > > > > > > loader > > > > > > > for squid be given enough time to "sleep" > > > for a > > > > > > while > > > > > > > before exiting. > > > > > > > > > > > > > > Thanks. > > > > > > > > > > > > > > Miles > > > > > > > > > > > > > > > > > __ > > > > > > > Do You Yahoo!? > > > > > > > Tired of spam? Yahoo! Mail has the best > > > spam > > > > > > protection around > > > > > > > http://mail.yahoo.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - > > > > > > > To unsubscribe, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > For additional commands, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > ## > > > > > > BKW - Bachman Kharazmi > > > > > > bahkha AT gmail D
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
BKW, Any chance of doing some type of automated web browsing from a machine and let it run overnight? IE: the client machine would keep randomly surfing to sites.. Scott On 8/17/05, Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > I've now tried squid. I works well for me running 0.76.4 > The installation succeeds and the squid process starts in right order. > The rdr rules 'DOES' exist in my rules.debug and has been enabled. > > I've read all squid logs and it does transperant caching out of the box. > > Now I'll leave the process running for a few hours while using inet > and see what happens... > > /bkw > > On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > SQUID should not be dying. If it is then I need to deactivate the > > package until a new one is released on the freebsd site. > > > > Scott > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > > > No need to file a ticket. Thanks for the swift action. > > > I'll wait till next release then. > > > > > > Also, I am concerned of the Squid process dying for > > > any reason and the rdr rule for transparent proxying > > > is still in effect. This will block http traffic to > > > the internet. Any solution for this? > > > > > > Thanks again. > > > > > > Miles > > > > > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > > > The solution here is to set the filter dirty flag in > > > > the squid startup > > > > script. This will force the rules to be reloaded > > > > and then squid will > > > > be running. > > > > > > > > I'll take care of it shortly. > > > > > > > > Scott > > > > > > > > > > > > On 8/16/05, Bill Marquette > > > > <[EMAIL PROTECTED]> wrote: > > > > > Albert, can you file a ticket on this at > > > > http://cvstrac.pfsense.com/ ? > > > > > I'd rather not delay boot until squid is up, but I > > > > suppose that's open > > > > > for debate. Without looking at the code, I'm > > > > wondering if we're even > > > > > starting up squid before the filter. > > > > > Can you insert a sleep(); statement before the > > > > is_process_running > > > > > statement and tell us how long you have to sleep > > > > for to get reliable > > > > > results? Also, what speed hardware is this on? > > > > Thanks > > > > > > > > > > --Bill > > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > > > wrote: > > > > > > I think it is actually a BUG in the script > > > > > > /etc/inc/filter.inc that checks for the squid > > > > process > > > > > > at boot time which will return FALSE because no > > > > > > package is loaded during this time yet. See the > > > > > > /etc/rc script for the loading sequence. > > > > > > > > > > > > The /etc/rc.bootup script that initializes the > > > > pf > > > > > > rules is called before executing rc.d items. > > > > Please > > > > > > see the /etc/rc script. > > > > > > > > > > > > As a solution, the > > > > "if(is_process_running("squid"))" > > > > > > at line no. 1134 of the file /etc/inc/filter.inc > > > > must > > > > > > be commented out. > > > > > > > > > > > > Cheers! > > > > > > > > > > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > When the squid package has installed properly > > > > > > > without any errors type: > > > > > > > # pfctl -sr | grep rdr > > > > > > > if that returns a rule and trans.proxy still > > > > doesn't > > > > > > > work (make sure > > > > > > > the squid process is running) then I would > > > > suggest > > > > > > > you read the squid > > > > > > > logs to findout why it doesn't cache. > > > > > > > > > > > > > > /bkw > > > > > > > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > > > > <[EMAIL PROTECTED]> > > > > > > > wrote: > > > > > > > > Hi! > > > > > > > > > > > > > > > > The rdr (nat) rule for squid transparent > > > > proxy is > > > > > > > > missing on pfsense 0.76.2 which causes > > > > transparent > > > > > > > > proxying NOT to function properly. The > > > > > > > corresponding > > > > > > > > pass rules are present however. > > > > > > > > > > > > > > > > The problem is corrected by commenting out > > > > line# > > > > > > > 1134 > > > > > > > > of /etc/inc/filter.inc: > > > > > > > > > > > > > > > > if (is_package_installed("squid") == > > > > 1) > > > > > > > > //if > > > > (is_process_running("squid")) > > > > > > > > > > > > > > > > Could it be because this function was called > > > > at > > > > > > > the > > > > > > > > time when squid has not fully loaded itself? > > > > If > > > > > > > this > > > > > > > > is the case, then it would be better if the > > > > rc > > > > > > > loader > > > > > > > > for squid be given enough time to "sleep" > > > > for a > > > > > > > while > > > > > > > > before exiting. > > > > > > > > > > > > > > > > Thanks. > > > > > > > > > > > > > > > > Miles > > > > > > > > > > > > > > > > > > > > __ > > > > > > > > Do You Yahoo!? > > > > > > > > Tired of spam? Yahoo! Mail has the b
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
sounds fun and useful atm. I'll search and see what I can find, I'am pretty sure there are tools for that.. /bkw On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > BKW, > > Any chance of doing some type of automated web browsing from a machine > and let it run overnight? IE: the client machine would keep randomly > surfing to sites.. > > Scott > > > On 8/17/05, Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > I've now tried squid. I works well for me running 0.76.4 > > The installation succeeds and the squid process starts in right order. > > The rdr rules 'DOES' exist in my rules.debug and has been enabled. > > > > I've read all squid logs and it does transperant caching out of the box. > > > > Now I'll leave the process running for a few hours while using inet > > and see what happens... > > > > /bkw > > > > On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > SQUID should not be dying. If it is then I need to deactivate the > > > package until a new one is released on the freebsd site. > > > > > > Scott > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > > > > No need to file a ticket. Thanks for the swift action. > > > > I'll wait till next release then. > > > > > > > > Also, I am concerned of the Squid process dying for > > > > any reason and the rdr rule for transparent proxying > > > > is still in effect. This will block http traffic to > > > > the internet. Any solution for this? > > > > > > > > Thanks again. > > > > > > > > Miles > > > > > > > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > > > > > The solution here is to set the filter dirty flag in > > > > > the squid startup > > > > > script. This will force the rules to be reloaded > > > > > and then squid will > > > > > be running. > > > > > > > > > > I'll take care of it shortly. > > > > > > > > > > Scott > > > > > > > > > > > > > > > On 8/16/05, Bill Marquette > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > Albert, can you file a ticket on this at > > > > > http://cvstrac.pfsense.com/ ? > > > > > > I'd rather not delay boot until squid is up, but I > > > > > suppose that's open > > > > > > for debate. Without looking at the code, I'm > > > > > wondering if we're even > > > > > > starting up squid before the filter. > > > > > > Can you insert a sleep(); statement before the > > > > > is_process_running > > > > > > statement and tell us how long you have to sleep > > > > > for to get reliable > > > > > > results? Also, what speed hardware is this on? > > > > > Thanks > > > > > > > > > > > > --Bill > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > > > > wrote: > > > > > > > I think it is actually a BUG in the script > > > > > > > /etc/inc/filter.inc that checks for the squid > > > > > process > > > > > > > at boot time which will return FALSE because no > > > > > > > package is loaded during this time yet. See the > > > > > > > /etc/rc script for the loading sequence. > > > > > > > > > > > > > > The /etc/rc.bootup script that initializes the > > > > > pf > > > > > > > rules is called before executing rc.d items. > > > > > Please > > > > > > > see the /etc/rc script. > > > > > > > > > > > > > > As a solution, the > > > > > "if(is_process_running("squid"))" > > > > > > > at line no. 1134 of the file /etc/inc/filter.inc > > > > > must > > > > > > > be commented out. > > > > > > > > > > > > > > Cheers! > > > > > > > > > > > > > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > When the squid package has installed properly > > > > > > > > without any errors type: > > > > > > > > # pfctl -sr | grep rdr > > > > > > > > if that returns a rule and trans.proxy still > > > > > doesn't > > > > > > > > work (make sure > > > > > > > > the squid process is running) then I would > > > > > suggest > > > > > > > > you read the squid > > > > > > > > logs to findout why it doesn't cache. > > > > > > > > > > > > > > > > /bkw > > > > > > > > > > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > > > > > <[EMAIL PROTECTED]> > > > > > > > > wrote: > > > > > > > > > Hi! > > > > > > > > > > > > > > > > > > The rdr (nat) rule for squid transparent > > > > > proxy is > > > > > > > > > missing on pfsense 0.76.2 which causes > > > > > transparent > > > > > > > > > proxying NOT to function properly. The > > > > > > > > corresponding > > > > > > > > > pass rules are present however. > > > > > > > > > > > > > > > > > > The problem is corrected by commenting out > > > > > line# > > > > > > > > 1134 > > > > > > > > > of /etc/inc/filter.inc: > > > > > > > > > > > > > > > > > > if (is_package_installed("squid") == > > > > > 1) > > > > > > > > > //if > > > > > (is_process_running("squid")) > > > > > > > > > > > > > > > > > > Could it be because this function was called > > > > > at > > > > > > > > the > > > > > > > > > time when squid has not fully loaded itself? > > > > > If > > > > > > > > this > > > > > > > > > is th
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
Thanks! On 8/17/05, Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > sounds fun and useful atm. > > I'll search and see what I can find, I'am pretty sure there are tools for > that.. > /bkw > > On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > BKW, > > > > Any chance of doing some type of automated web browsing from a machine > > and let it run overnight? IE: the client machine would keep randomly > > surfing to sites.. > > > > Scott > > > > > > On 8/17/05, Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > I've now tried squid. I works well for me running 0.76.4 > > > The installation succeeds and the squid process starts in right order. > > > The rdr rules 'DOES' exist in my rules.debug and has been enabled. > > > > > > I've read all squid logs and it does transperant caching out of the box. > > > > > > Now I'll leave the process running for a few hours while using inet > > > and see what happens... > > > > > > /bkw > > > > > > On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > SQUID should not be dying. If it is then I need to deactivate the > > > > package until a new one is released on the freebsd site. > > > > > > > > Scott > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > > > > > No need to file a ticket. Thanks for the swift action. > > > > > I'll wait till next release then. > > > > > > > > > > Also, I am concerned of the Squid process dying for > > > > > any reason and the rdr rule for transparent proxying > > > > > is still in effect. This will block http traffic to > > > > > the internet. Any solution for this? > > > > > > > > > > Thanks again. > > > > > > > > > > Miles > > > > > > > > > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > The solution here is to set the filter dirty flag in > > > > > > the squid startup > > > > > > script. This will force the rules to be reloaded > > > > > > and then squid will > > > > > > be running. > > > > > > > > > > > > I'll take care of it shortly. > > > > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > On 8/16/05, Bill Marquette > > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > Albert, can you file a ticket on this at > > > > > > http://cvstrac.pfsense.com/ ? > > > > > > > I'd rather not delay boot until squid is up, but I > > > > > > suppose that's open > > > > > > > for debate. Without looking at the code, I'm > > > > > > wondering if we're even > > > > > > > starting up squid before the filter. > > > > > > > Can you insert a sleep(); statement before the > > > > > > is_process_running > > > > > > > statement and tell us how long you have to sleep > > > > > > for to get reliable > > > > > > > results? Also, what speed hardware is this on? > > > > > > Thanks > > > > > > > > > > > > > > --Bill > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > > > > > wrote: > > > > > > > > I think it is actually a BUG in the script > > > > > > > > /etc/inc/filter.inc that checks for the squid > > > > > > process > > > > > > > > at boot time which will return FALSE because no > > > > > > > > package is loaded during this time yet. See the > > > > > > > > /etc/rc script for the loading sequence. > > > > > > > > > > > > > > > > The /etc/rc.bootup script that initializes the > > > > > > pf > > > > > > > > rules is called before executing rc.d items. > > > > > > Please > > > > > > > > see the /etc/rc script. > > > > > > > > > > > > > > > > As a solution, the > > > > > > "if(is_process_running("squid"))" > > > > > > > > at line no. 1134 of the file /etc/inc/filter.inc > > > > > > must > > > > > > > > be commented out. > > > > > > > > > > > > > > > > Cheers! > > > > > > > > > > > > > > > > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > When the squid package has installed properly > > > > > > > > > without any errors type: > > > > > > > > > # pfctl -sr | grep rdr > > > > > > > > > if that returns a rule and trans.proxy still > > > > > > doesn't > > > > > > > > > work (make sure > > > > > > > > > the squid process is running) then I would > > > > > > suggest > > > > > > > > > you read the squid > > > > > > > > > logs to findout why it doesn't cache. > > > > > > > > > > > > > > > > > > /bkw > > > > > > > > > > > > > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > > > > > > <[EMAIL PROTECTED]> > > > > > > > > > wrote: > > > > > > > > > > Hi! > > > > > > > > > > > > > > > > > > > > The rdr (nat) rule for squid transparent > > > > > > proxy is > > > > > > > > > > missing on pfsense 0.76.2 which causes > > > > > > transparent > > > > > > > > > > proxying NOT to function properly. The > > > > > > > > > corresponding > > > > > > > > > > pass rules are present however. > > > > > > > > > > > > > > > > > > > > The problem is corrected by commenting out > > > > > > line# > > > > > > > > > 1134 > > > > > > > > > > of /etc/inc/filter.inc: > > > > > > > > > > > > > > > > > > > > if (is_package_installed(
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
http://bkw.lindesign.se/tmp/squid.jpg I consider transperant squid as working. the robot's have visting enough now. /bkw On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > Thanks! > > On 8/17/05, Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > sounds fun and useful atm. > > > > I'll search and see what I can find, I'am pretty sure there are tools for > > that.. > > /bkw > > > > On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > BKW, > > > > > > Any chance of doing some type of automated web browsing from a machine > > > and let it run overnight? IE: the client machine would keep randomly > > > surfing to sites.. > > > > > > Scott > > > > > > > > > On 8/17/05, Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > I've now tried squid. I works well for me running 0.76.4 > > > > The installation succeeds and the squid process starts in right order. > > > > The rdr rules 'DOES' exist in my rules.debug and has been enabled. > > > > > > > > I've read all squid logs and it does transperant caching out of the box. > > > > > > > > Now I'll leave the process running for a few hours while using inet > > > > and see what happens... > > > > > > > > /bkw > > > > > > > > On 8/17/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > SQUID should not be dying. If it is then I need to deactivate the > > > > > package until a new one is released on the freebsd site. > > > > > > > > > > Scott > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> wrote: > > > > > > No need to file a ticket. Thanks for the swift action. > > > > > > I'll wait till next release then. > > > > > > > > > > > > Also, I am concerned of the Squid process dying for > > > > > > any reason and the rdr rule for transparent proxying > > > > > > is still in effect. This will block http traffic to > > > > > > the internet. Any solution for this? > > > > > > > > > > > > Thanks again. > > > > > > > > > > > > Miles > > > > > > > > > > > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > The solution here is to set the filter dirty flag in > > > > > > > the squid startup > > > > > > > script. This will force the rules to be reloaded > > > > > > > and then squid will > > > > > > > be running. > > > > > > > > > > > > > > I'll take care of it shortly. > > > > > > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > > > > On 8/16/05, Bill Marquette > > > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > Albert, can you file a ticket on this at > > > > > > > http://cvstrac.pfsense.com/ ? > > > > > > > > I'd rather not delay boot until squid is up, but I > > > > > > > suppose that's open > > > > > > > > for debate. Without looking at the code, I'm > > > > > > > wondering if we're even > > > > > > > > starting up squid before the filter. > > > > > > > > Can you insert a sleep(); statement before the > > > > > > > is_process_running > > > > > > > > statement and tell us how long you have to sleep > > > > > > > for to get reliable > > > > > > > > results? Also, what speed hardware is this on? > > > > > > > Thanks > > > > > > > > > > > > > > > > --Bill > > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > > > > > > > wrote: > > > > > > > > > I think it is actually a BUG in the script > > > > > > > > > /etc/inc/filter.inc that checks for the squid > > > > > > > process > > > > > > > > > at boot time which will return FALSE because no > > > > > > > > > package is loaded during this time yet. See the > > > > > > > > > /etc/rc script for the loading sequence. > > > > > > > > > > > > > > > > > > The /etc/rc.bootup script that initializes the > > > > > > > pf > > > > > > > > > rules is called before executing rc.d items. > > > > > > > Please > > > > > > > > > see the /etc/rc script. > > > > > > > > > > > > > > > > > > As a solution, the > > > > > > > "if(is_process_running("squid"))" > > > > > > > > > at line no. 1134 of the file /etc/inc/filter.inc > > > > > > > must > > > > > > > > > be commented out. > > > > > > > > > > > > > > > > > > Cheers! > > > > > > > > > > > > > > > > > > > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > When the squid package has installed properly > > > > > > > > > > without any errors type: > > > > > > > > > > # pfctl -sr | grep rdr > > > > > > > > > > if that returns a rule and trans.proxy still > > > > > > > doesn't > > > > > > > > > > work (make sure > > > > > > > > > > the squid process is running) then I would > > > > > > > suggest > > > > > > > > > > you read the squid > > > > > > > > > > logs to findout why it doesn't cache. > > > > > > > > > > > > > > > > > > > > /bkw > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > > > > > > > <[EMAIL PROTECTED]> > > > > > > > > > > wrote: > > > > > > > > > > > Hi! > > > > > > > > > > > > > > > > > > > > > > The rdr (nat) rule for squid transparent > > > > > > > proxy is > > > > > > > > > > > missing on pf
Re: [pfSense Support] pfSense 0.76.2: No rdr rule for Squid Transparent Proxy
Hi Scott and all, I don't experience Squid dying in pfsense yet. But, I did experience this in the past when Squid core dumps in my custom FreeBSD box. The possibility of Squid dying or terminating (for whatever reason) is not remote and with the rdr rules for transparent proxying still in effect, this could effectively block http traffic. A solution could be to use a script (See the RunCache script for squid as reference) to periodically check if squid is still running and when it's not, the script should set the filter dirty flag to reload the filters. With this solution, the /etc/inc/filter.inc should also be modified to allow removal of the rdr rule for transparent proxying only when squid has died or terminated. ... if (is_package_installed("squid") == 1) if(is_process_running("squid")) { //insert rule for transp proxy } else { //remove rdr rule for transp proxy } ... I hope this makes my point clear. Miles --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > SQUID should not be dying. If it is then I need to > deactivate the > package until a new one is released on the freebsd > site. > > Scott > > > On 8/16/05, Albert Miles Enabe <[EMAIL PROTECTED]> > wrote: > > No need to file a ticket. Thanks for the swift > action. > > I'll wait till next release then. > > > > Also, I am concerned of the Squid process dying > for > > any reason and the rdr rule for transparent > proxying > > is still in effect. This will block http traffic > to > > the internet. Any solution for this? > > > > Thanks again. > > > > Miles > > > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > The solution here is to set the filter dirty > flag in > > > the squid startup > > > script. This will force the rules to be > reloaded > > > and then squid will > > > be running. > > > > > > I'll take care of it shortly. > > > > > > Scott > > > > > > > > > On 8/16/05, Bill Marquette > > > <[EMAIL PROTECTED]> wrote: > > > > Albert, can you file a ticket on this at > > > http://cvstrac.pfsense.com/ ? > > > > I'd rather not delay boot until squid is up, > but I > > > suppose that's open > > > > for debate. Without looking at the code, I'm > > > wondering if we're even > > > > starting up squid before the filter. > > > > Can you insert a sleep(); statement before the > > > is_process_running > > > > statement and tell us how long you have to > sleep > > > for to get reliable > > > > results? Also, what speed hardware is this on? > > > Thanks > > > > > > > > --Bill > > > > > > > > On 8/16/05, Albert Miles Enabe > <[EMAIL PROTECTED]> > > > wrote: > > > > > I think it is actually a BUG in the script > > > > > /etc/inc/filter.inc that checks for the > squid > > > process > > > > > at boot time which will return FALSE because > no > > > > > package is loaded during this time yet. See > the > > > > > /etc/rc script for the loading sequence. > > > > > > > > > > The /etc/rc.bootup script that initializes > the > > > pf > > > > > rules is called before executing rc.d items. > > > Please > > > > > see the /etc/rc script. > > > > > > > > > > As a solution, the > > > "if(is_process_running("squid"))" > > > > > at line no. 1134 of the file > /etc/inc/filter.inc > > > must > > > > > be commented out. > > > > > > > > > > Cheers! > > > > > > > > > > > > > > > --- Bachman Kharazmi <[EMAIL PROTECTED]> > wrote: > > > > > > > > > > > When the squid package has installed > properly > > > > > > without any errors type: > > > > > > # pfctl -sr | grep rdr > > > > > > if that returns a rule and trans.proxy > still > > > doesn't > > > > > > work (make sure > > > > > > the squid process is running) then I would > > > suggest > > > > > > you read the squid > > > > > > logs to findout why it doesn't cache. > > > > > > > > > > > > /bkw > > > > > > > > > > > > > > > > > > On 8/16/05, Albert Miles Enabe > > > <[EMAIL PROTECTED]> > > > > > > wrote: > > > > > > > Hi! > > > > > > > > > > > > > > The rdr (nat) rule for squid transparent > > > proxy is > > > > > > > missing on pfsense 0.76.2 which causes > > > transparent > > > > > > > proxying NOT to function properly. The > > > > > > corresponding > > > > > > > pass rules are present however. > > > > > > > > > > > > > > The problem is corrected by commenting > out > > > line# > > > > > > 1134 > > > > > > > of /etc/inc/filter.inc: > > > > > > > > > > > > > > if > (is_package_installed("squid") == > > > 1) > > > > > > > //if > > > (is_process_running("squid")) > > > > > > > > > > > > > > Could it be because this function was > called > > > at > > > > > > the > > > > > > > time when squid has not fully loaded > itself? > > > If > > > > > > this > > > > > > > is the case, then it would be better if > the > > > rc > > > > > > loader > > > > > > > for squid be given enough time to > "sleep" > > > for a > > > > > > while > > > > > > > before exiting. > > > > > > >