RE: [swinog] X.21, V.35 Cisco Interface in Master Mode
Hi André We've used this several times for customer connections at TIX. You need on one side a DTE and on the other side a DCE cable. As soon as the DCE cable is connected, can you set the clock rate on this I/F. -- X.21 up to 8Mbit/s Cheers, Günti -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Andre Oppermann Sent: Donnerstag, 1. September 2005 19:47 To: swinog@swinog.ch Subject: [swinog] X.21, V.35 Cisco Interface in Master Mode Is anyone of you running a Cisco with X.21 or V.35 interface in master mode (the Cisco is supplying the clocking on the line). Normally the modem (DCE) supplies the line clock to the Cisco. I'm interested in (production) cases where you had to supply the clock from the cisco to the other side. -- Andre ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] X.21, V.35 Cisco Interface in Master Mode
Roman Hochuli wrote: But IMO such setups are more a lab-thing than real-live stuff in nowadays. Oh yes, it comes in every CCIE lab these days, and as you never know which side is DCE or DTE on the first glance, clock rate is always just trial and error. F. ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
RE: [swinog] X.21, V.35 Cisco Interface in Master Mode
Bangerter Markus wrote: To avoid trial and error, you can use show controller serial x/y. There you see the type of cable attached to your serial interface. I knew there would be something to find out, but then you have to know that clock rate should be set at the DCE end ... clock-rate can only be set on the dce ! Cheers, Markus ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] X.21, V.35 Cisco Interface in Master Mode
On 02.09.2005 11:47 Fredy Kuenzler wrote Bangerter Markus wrote: Oh yes, it comes in every CCIE lab these days, and as you never know which side is DCE or DTE on the first glance, clock rate is always just trial and error. To avoid trial and error, you can use show controller serial x/y. There you see the type of cable attached to your serial interface. I knew there would be something to find out, but then you have to know that clock rate should be set at the DCE end ... Fredy, that is telecommunication basics, isn't it? Arnold -- Arnold Nipper / nIPper consulting, Sandhausen, Germany email: [EMAIL PROTECTED] phone: +49 6224 9259 299 mobile: +49 172 2650958 fax: +49 6224 9259 333 ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] Layer 3 Switch Recommendations
Hi all, We are looking for an L3 edge switch with the following specifiacations: Must have: - 128 MB Ram - BGP4 - VLAN, Dot1q etc. (normal Layer 2 features) - 4 GBIC slots - 8 to ... 10/100/1000 Ports - not too expensive Nice to have: - 256 / 512 MB Ram or expansion slots - Cisco CLI ;-) (for the lazy sysadmin) - small box, 1HE is best Cisco C3560 with EMI would do the job, but I guess there are other boxes on the market with a better value-for-money ratio. We are also checking Foundry FastIron FX424HF, but has a 1.5 HE form factor. Enterasys X-Pedition 2100 has only 8x SX ports, but no standard 10/100/1000 Ethernet. Any other suggestions? F. ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
RE: [swinog] Layer 3 Switch Recommendations
Hi Fredy Have a look at http://www.huawei.com ;-) Cheers, Markus ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] Software Patents in Switzerland
Salut, On Fri, Sep 02, 2005 at 04:59:30PM +0200, Andre Oppermann wrote: Information on Software Patents in Switzerland, starting from Page 14, Chapter 2.1.1: http://www.ige.ch/D/jurinfo/documents/RiLi_Endfassung_Externe_Konsultation_Internet_d.pdf I think this is a discussion for [EMAIL PROTECTED], although I agree that it must be made. Tonnerre pgpghcov8qGTY.pgp Description: PGP signature ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog