Re: [swinog] cisco switches: new config with vlan defintion is not applied to startup-config for some reason
Hi Erich Thank you for your answer. I also saw this in the documentation. But the switch behaves differently. If I have a switch with already configured vlans with vtp mode transparent (with the same infos in vlan.dat ) then only the higher numbered vlans are going to be applied from the startup config. The lower numbered vlans are copied from vlan.dat to the configuration. Regards Luke 2013/7/24 Erich Hohermuth > Hi > > Regarding to the cisco docu (1) it depends on the vtp mode and the > config of vlan.dat. > > If both the VLAN database and the configuration file show the VTP mode > as transparent and the VTP domain names match, the VLAN database is > ignored. The VTP and VLAN configurations in the startup configuration > file are used. The VLAN database revision number remains unchanged in > the VLAN database. > > If there is no vlan.dat file, or if the vlan.dat cannot be read, the > switch boots with the default vlan characteristics. You can use the > archiv commands to safe and restore the vlan.dat file. > > > Regards > Erich > > [1] > > http://www.cisco.com/en/US/products/hw/switches/ps5213/products_tech_note09186a0080a49dbf.shtml > > Am Wed Jul 24 14:35:15 2013 schrieb Lukas Eisenberger: > > > So during the miration I want to do something like this: > > > > copy tftp://10.6.100.3/config.txt <http://10.6.100.3/config.txt> > > startup-config > > and do a reload > > or > > configure replace tftp://10.6.100.3/config.txt > > <http://10.6.100.3/config.txt> > > > > I tested my miration path in the lab and I figured out that low > > numbering vlans in the range of 2-1001 are for some strange reason not > > applied to the config. I tried also deleting vlan.dat and change to > > vtp of or transparent/server/client and diffrent vtp versions before > > applying the config without success. > > > > Does somebody have a clou about the strange behaviour? > ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] cisco switches: new config with vlan defintion is not applied to startup-config for some reason
Hi list During a future migration I will migrate the configuration of around onehundert already existing switches. Because I am lazy as many it guys I prepared the configs which I want to apply to the switches in order to safe time. Many things change from the previous config to the future one: lacp uplinks, vlan defintions, management vlan and so on. So during the miration I want to do something like this: copy tftp://10.6.100.3/config.txt startup-config and do a reload or configure replace tftp://10.6.100.3/config.txt I tested my miration path in the lab and I figured out that low numbering vlans in the range of 2-1001 are for some strange reason not applied to the config. I tried also deleting vlan.dat and change to vtp of or transparent/server/client and diffrent vtp versions before applying the config without success. Does somebody have a clou about the strange behaviour? I use iso version 15.0(2)SE on a 2960S Cheers Luke ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] Get rid of server rack?
Hi I am looking for a server rack for my installation at home. Perhaps somebody has a server rack standing useless around? If you want to get rid of your old rack but you are to lazy to do the disposal what about letting me pick up your old rack? Contact me off list. Thanks! Luke ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] Intrested in Mutual CaCert Assuring @ Beer Event 114?
Hi Is somebody intressted or willing to do a mutual cacert assuring @ the upcoming Swinog beer event 114? Would be nice. Contact me offlist. greetings Luke Original-Nachricht Betreff: [swinog] SwiNOG-BE114 - Beer Event 114 - 8th of October 2012 @ Don Weber / ZH Datum: Thu, 4 Oct 2012 22:03:37 +0200 Von:Steven Glogger An: swi...@swinog.ch hi everybody here's the announcement for the next beer event: the facts for the next event: - Date: monday, 8th of October 2012 Time: starting around 18.30 o'clock Location: @ the "Don Weber" in ZH (http://www.donweber.ch/) Registration deadline: 07.10.2012 20:00:00 Registration URL: mail me :) the registration page is currently on vacations :) - since we have to make reservations, i need to know who's coming and who not. If you cannot attend and you're registered please inform me asap (+41 79 277 92 35). greetings -steven ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] NIC
Anybody else also having problems reaching www.nic.ch? Cheers Luke ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] Private VLAN with none-private-vlan speaking switch in between
Hi Does somebody know if its possible to connect two private-vlan speaking switches (Cisco 3560/3750) with a none-private-vlan speaking switch in between? Does that work so that I can still use the community/isolated vlans on both private-vlan speaking switches? ( http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_58_se/configuration/guide/swpvlan.html ) [3650] <--> HP Switch <--> [3650] Cheers Luki ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] EtherChannel - Long Time between LINK-3-UPDOWN and LINEPROTO-5-UPDOWN
Hi Tobias Here are perhaps some hints... -channel-group NUMBER mode on: Is a static channel with NO channel protocol on it. If you speak LACP on the other side the channel won't come up because the neighbors don't agree to a channel. You need a "channel-group NUMBER mode active" on the switch side so it speaks LACP. Set it to this mode and run a debug on the switch so you can see more: debug lacp ? See: (http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/15.0_1_se/command/reference/cli1.html#wp11890010) You can also fix the channel only to speak LACP with "channel-protocol lacp" in combination with "channel-group NUMBER active". See: (http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/15.0_1_se/command/reference/cli1.html#wp11890203) -switchport nonegotiate: disables DTP (dynamic trunking protocol) which is used to negotiate a trunk between to dtp speaking switches. If you set the port to "switchport mode trunk" on the switch side then you make a trunk on this port. See: (http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/15.0_1_se/command/reference/cli3.html#wp1948171) . So in my point of view you don't need the "switchport nonegotiate" command. -speed 1000: if you fix the speed to 1Gbit then its always full duplex. There is no 1Gbit with halfduplex as far as I know. So the duplex full is also useless on this port. Generally speaking: If you fix the duplex mode and speed one side please watch out that you also fix it on the other side. So I would frist watch out that the channel comes up. For trunking and vlans on the trunks you can troubleshoot later. Cheers Luki Am 05.04.2012 16:21, schrieb Tobias Brunner: Hi everyone, I've "compiled" all your input, here is the output: The cables are all cat5e, which should be OK. But to be sure I've managed to find a cat6 cable, but as expected, it did not change anything. So the cables are not the problem. Then I added "speed 1000" and "duplex full" to the two port configuration, but: no change. Next step: Try "mode on" -> Does not work because "on" is PAGP which is not compatible with LACP. Go on: Try "switchport nonegotiate" -> No change in behaviour. When the servers are booting (BIOS, not yet OS) then there is no bonding/etherchannel available. Both ports are independent. That should be no problem for the "mode active/passive" and it works as expected, the server can do DHCP/PXE during boot. But it takes a long time until the server gets an IP from DHCP because it takes so long to get the protocol up. Is your server supporting LACP? During BIOS boot: no While running OS: yes How are is the bonding configured on the interfaces? During BIOS boot: not configured While running OS: configured with linux bonding (that works fine) Maybe this will stay a mysterium =) I wish everyone good luck in finding the easter-eggs. (Maybe this behavior is a cisco-easter-egg and solved after easter, who knows =) Cheers, Tobias ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] Swisscom Business Light VDSL with Cisco Router
Hi I need to configure a Cisco router (VDSL) for a customer with Swisscom Business light contract. Does somebody has a config template of an existing cisco router? Please contact me off list. Thanks in advance. Regards Lukas ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] Facebook down
I am so glad that I deleted my account weeks ago :-D cheers Luke Am 07.03.2012 08:23, schrieb Marco Fretz: Good morning everyone, Does anyone have an idea what happened to Facebook DNS servers? "A" www.facebook.com DNS queries are not answered anymore. I'm not sure but looks like the error exists since about 07:15 today. on facebookdown.com were a lot of reports from around the world, now this site is also dead (to many mysql connections, which possibly means to many users...). greets Marco ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog