Re: [swinog] Cisco router problem: config lost
Sebastian: First, you must load more current and stable version of the IOS for this platform-at least 12.2 Second you have internal flash of 8MB and PCMCIA flash of 16MB. Where is your Image actually stored? The system is telling you that the image it has been told to boot from is damaged, or the flash memory it is residind on is damaged. And yes, either your config register settings are wrong, or the system has tried all other locations trying to find a working configuration file, and has found none. This unit needs to be off lined, have new flash installed so max flash for this model is available, also, if you can upgrade ram to maximum, do that also. This is all so that you can load a. decent normal IOS on the box and have a chance to rebuild your config. Good Luck! Vinnie Watson Sent from my iPhone On Jul 30, 2009, at 9:38 PM, . . localhostdevn...@gmail.com wrote: Hi everyone! our c7204vxr shows the following after reboot: -- System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMEN T SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory getdevnum warning: device boot flash has size of zero getdevnum warning: device boot flash has size of zero open: read error...requested 0x4 bytes, got 0x trouble reading device magic number boot: cannot open bootflash: an alternate boot helper program is not specified (monitor variable BOOTLDR is not set) and unable to determine first file in bootflash loadprog: error - on file open boot: cannot load cisco2-C7200 System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMEN T SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory Self decompressing the image : ### [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 7200 Software (C7200-KBOOT-M), Version 12.0(26)S6, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by cisco Systems, Inc. Compiled Fri 13-May-05 15:55 by pwade Image text-base: 0x60008C40, data-base: 0x608B2000 cisco 7204VXR (NPE400) processor with 491520K/32768K bytes of memory. R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2, 4096KB L3 Cache 4 slot VXR midplane, Version 2.7 Last reset from power-on Bridging software. X.25 software, Version 3.0.0. 4 FastEthernet/IEEE 802.3 interface(s) 125K bytes of non-volatile configuration memory. 16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 8192K bytes of Flash internal SIMM (Sector size 256K). --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: --- --- --- --- --- --- what`s the problem here? the router was running fine for about 5 months without any reboot thank you regards, sebastian ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] Cisco router problem: config lost
Hi Sebastien There is a free tool for the config-registers available which is very usefull: http://www.boson.com/FreeUtilities.html -- Config Reg Calculator Best regards, Günti -Original Message- From: swinog-boun...@lists.swinog.ch [mailto:swinog-boun...@lists.swinog.ch] On Behalf Of Rob Thomas Sent: Thursday, July 30, 2009 9:42 PM To: . . Cc: swinog@lists.swinog.ch Subject: Re: [swinog] Cisco router problem: config lost Hi, Sebastien. --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: -- what`s the problem here? Sounds like a config-register needs to be altered. Take a peek here: http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_tech_note09186a00802017a1.shtml Hope this helps! Thanks, Rob. -- Rob Thomas Team Cymru https://www.team-cymru.org/ ASSERT(coffee != empty); ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
[swinog] Cisco router problem: config lost
Hi everyone! our c7204vxr shows the following after reboot: -- System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMEN T SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory getdevnum warning: device boot flash has size of zero getdevnum warning: device boot flash has size of zero open: read error...requested 0x4 bytes, got 0x trouble reading device magic number boot: cannot open bootflash: an alternate boot helper program is not specified (monitor variable BOOTLDR is not set) and unable to determine first file in bootflash loadprog: error - on file open boot: cannot load cisco2-C7200 System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMEN T SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory Self decompressing the image : ### [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 7200 Software (C7200-KBOOT-M), Version 12.0(26)S6, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by cisco Systems, Inc. Compiled Fri 13-May-05 15:55 by pwade Image text-base: 0x60008C40, data-base: 0x608B2000 cisco 7204VXR (NPE400) processor with 491520K/32768K bytes of memory. R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2, 4096KB L3 Cache 4 slot VXR midplane, Version 2.7 Last reset from power-on Bridging software. X.25 software, Version 3.0.0. 4 FastEthernet/IEEE 802.3 interface(s) 125K bytes of non-volatile configuration memory. 16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 8192K bytes of Flash internal SIMM (Sector size 256K). --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: -- what`s the problem here? the router was running fine for about 5 months without any reboot thank you regards, sebastian ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] Cisco router problem: config lost
Hi Rob, thank you for your tip, but now we got another error during boot: -- System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory getdevnum warning: device boot flash has size of zero getdevnum warning: device boot flash has size of zero open: read error...requested 0x4 bytes, got 0x trouble reading device magic number boot: cannot open bootflash: an alternate boot helper program is not specified (monitor variable BOOTLDR is not set) and unable to determine first file in bootflash loadprog: error - on file open boot: cannot load cisco2-C7200 System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory boot: cannot determine first file name on device disk0: System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory 2009/7/30 Rob Thomas r...@cymru.com: Hi, Sebastien. --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: -- what`s the problem here? Sounds like a config-register needs to be altered. Take a peek here: http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_tech_note09186a00802017a1.shtml Hope this helps! Thanks, Rob. -- Rob Thomas Team Cymru https://www.team-cymru.org/ ASSERT(coffee != empty); ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Re: [swinog] Cisco router problem: config lost
Hi there 2 things: - why do you deploy developent/beta/alpha/whatever ios???thats ooold :-) - your hardware seems to be fucked up... Try the cisco error message decoder on their website. gruss -steven Am 30.07.2009 um 21:55 schrieb . . localhostdevn...@gmail.com: Hi Rob, thank you for your tip, but now we got another error during boot: --- --- --- --- --- --- System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory getdevnum warning: device boot flash has size of zero getdevnum warning: device boot flash has size of zero open: read error...requested 0x4 bytes, got 0x trouble reading device magic number boot: cannot open bootflash: an alternate boot helper program is not specified (monitor variable BOOTLDR is not set) and unable to determine first file in bootflash loadprog: error - on file open boot: cannot load cisco2-C7200 System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory boot: cannot determine first file name on device disk0: System Bootstrap, Version 12.1(2710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE Copyright (c) 1994-2000 by cisco Systems, Inc. C7200 platform with 524288 Kbytes of main memory 2009/7/30 Rob Thomas r...@cymru.com: Hi, Sebastien. --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: --- --- --- --- --- --- what`s the problem here? Sounds like a config-register needs to be altered. Take a peek here: http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_tech_note09186a00802017a1.shtml Hope this helps! Thanks, Rob. -- Rob Thomas Team Cymru https://www.team-cymru.org/ ASSERT(coffee != empty); ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog ___ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog