Re: [sword-devel] Module upload: CPDV
Correction: Earlier I went to ftp://crosswire.org to get the updated version. On Thu, Apr 18, 2019 at 11:39 AM Michael H wrote: > Bibletime didn't see the update, so I went to ftp.crosswire.org and > downloaded it manually, and it is the new edition. I did this several hours > ago, before your email. > > But now when I do the same thing (ftp.crosswire.org), it is the older > module (2015 timestamp on the conf file.) > > On Thu, Apr 18, 2019 at 7:40 AM Cyrille wrote: > >> >> >> Il 18/04/2019 14:29, Peter Von Kaehne ha scritto: >> >> The module is visible in crosswire.org. The module is not visible in >> ftp.crosswire.org. >> >> Yes, I added a repo without the ftp, only crosswire.org and I can see >> both CPDV and ItNomibbia. >> >> The module is uploaded into host.crosswire.org, which is where I am told >> I should upload things until all is again amalgamated. >> >> TBH I am fed up. The proliferation of urls leading to different >> instantations of our server, old and new is a bit of a problem. >> >> Peter >> >> *Gesendet:* Donnerstag, 18. April 2019 um 13:05 Uhr >> *Von:* "Karl Kleinpaste" >> *An:* "SWORD Developers' Collaboration Forum" >> >> *Betreff:* Re: [sword-devel] Module upload: CPDV >> On 4/18/19 6:53 AM, Peter Von Kaehne wrote: >> >> uses the same module manager as Xiphos >> >> Crosswire's mods.d.tar.gz was not regenerated after the update. That's >> why Xiphos doesn't see it after refresh. >> >> $ pwd >> /home/karl/.sword/InstallMgr/20081216195754/mods.d >> $ ls -l cpdv.conf >> -rw-r--r-- 1 karl karl 2257 Jan 16 2014 cpdv.conf >> $ ls -lc cpdv.conf >> -rw-r--r-- 1 karl karl 2257 Apr 18 07:59 cpdv.conf >> $ grep ^Version cpdv.conf >> Version=1.0.1 >> >> ___ sword-devel mailing list: >> sword-devel@crosswire.org >> http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to >> unsubscribe/change your settings at above page >> >> ___ >> sword-devel mailing list: >> sword-devel@crosswire.orghttp://www.crosswire.org/mailman/listinfo/sword-devel >> Instructions to unsubscribe/change your settings at above page >> >> >> ___ >> sword-devel mailing list: sword-devel@crosswire.org >> http://www.crosswire.org/mailman/listinfo/sword-devel >> Instructions to unsubscribe/change your settings at above page > > ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] Module upload: CPDV
Bibletime didn't see the update, so I went to ftp.crosswire.org and downloaded it manually, and it is the new edition. I did this several hours ago, before your email. But now when I do the same thing (ftp.crosswire.org), it is the older module (2015 timestamp on the conf file.) On Thu, Apr 18, 2019 at 7:40 AM Cyrille wrote: > > > Il 18/04/2019 14:29, Peter Von Kaehne ha scritto: > > The module is visible in crosswire.org. The module is not visible in > ftp.crosswire.org. > > Yes, I added a repo without the ftp, only crosswire.org and I can see > both CPDV and ItNomibbia. > > The module is uploaded into host.crosswire.org, which is where I am told > I should upload things until all is again amalgamated. > > TBH I am fed up. The proliferation of urls leading to different > instantations of our server, old and new is a bit of a problem. > > Peter > > *Gesendet:* Donnerstag, 18. April 2019 um 13:05 Uhr > *Von:* "Karl Kleinpaste" > *An:* "SWORD Developers' Collaboration Forum" > > *Betreff:* Re: [sword-devel] Module upload: CPDV > On 4/18/19 6:53 AM, Peter Von Kaehne wrote: > > uses the same module manager as Xiphos > > Crosswire's mods.d.tar.gz was not regenerated after the update. That's why > Xiphos doesn't see it after refresh. > > $ pwd > /home/karl/.sword/InstallMgr/20081216195754/mods.d > $ ls -l cpdv.conf > -rw-r--r-- 1 karl karl 2257 Jan 16 2014 cpdv.conf > $ ls -lc cpdv.conf > -rw-r--r-- 1 karl karl 2257 Apr 18 07:59 cpdv.conf > $ grep ^Version cpdv.conf > Version=1.0.1 > > ___ sword-devel mailing list: > sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to > unsubscribe/change your settings at above page > > ___ > sword-devel mailing list: > sword-devel@crosswire.orghttp://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page > > > ___ > sword-devel mailing list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] Module upload: CPDV
Il 18/04/2019 14:29, Peter Von Kaehne ha scritto: > The module is visible in crosswire.org. The module is not visible in > ftp.crosswire.org. > Yes, I added a repo without the ftp, only crosswire.org and I can see both CPDV and ItNomibbia. > The module is uploaded into host.crosswire.org, which is where I am > told I should upload things until all is again amalgamated. > > TBH I am fed up. The proliferation of urls leading to different > instantations of our server, old and new is a bit of a problem. > > Peter > > *Gesendet:* Donnerstag, 18. April 2019 um 13:05 Uhr > *Von:* "Karl Kleinpaste" > *An:* "SWORD Developers' Collaboration Forum" > *Betreff:* Re: [sword-devel] Module upload: CPDV > On 4/18/19 6:53 AM, Peter Von Kaehne wrote: > > uses the same module manager as Xiphos > > Crosswire's mods.d.tar.gz was not regenerated after the update. That's > why Xiphos doesn't see it after refresh. > > $ pwd > /home/karl/.sword/InstallMgr/20081216195754/mods.d > $ ls -l cpdv.conf > -rw-r--r-- 1 karl karl 2257 Jan 16 2014 cpdv.conf > $ ls -lc cpdv.conf > -rw-r--r-- 1 karl karl 2257 Apr 18 07:59 cpdv.conf > $ grep ^Version cpdv.conf > Version=1.0.1 > > ___ sword-devel mailing > list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to > unsubscribe/change your settings at above page > > ___ > sword-devel mailing list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] Module upload: CPDV
The module is visible in crosswire.org. The module is not visible in ftp.crosswire.org. The module is uploaded into host.crosswire.org, which is where I am told I should upload things until all is again amalgamated. TBH I am fed up. The proliferation of urls leading to different instantations of our server, old and new is a bit of a problem. Peter Gesendet: Donnerstag, 18. April 2019 um 13:05 Uhr Von: "Karl Kleinpaste" An: "SWORD Developers' Collaboration Forum" Betreff: Re: [sword-devel] Module upload: CPDV On 4/18/19 6:53 AM, Peter Von Kaehne wrote: uses the same module manager as Xiphos Crosswire's mods.d.tar.gz was not regenerated after the update. That's why Xiphos doesn't see it after refresh. $ pwd /home/karl/.sword/InstallMgr/20081216195754/mods.d $ ls -l cpdv.conf -rw-r--r-- 1 karl karl 2257 Jan 16 2014 cpdv.conf $ ls -lc cpdv.conf -rw-r--r-- 1 karl karl 2257 Apr 18 07:59 cpdv.conf $ grep ^Version cpdv.conf Version=1.0.1 ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] Module upload: CPDV
Il 18/04/2019 14:05, Karl Kleinpaste ha scritto: > On 4/18/19 6:53 AM, Peter Von Kaehne wrote: >> uses the same module manager as Xiphos > Crosswire's mods.d.tar.gz was not regenerated after the update. That's > why Xiphos doesn't see it after refresh. > > $ pwd > /home/karl/.sword/InstallMgr/20081216195754/mods.d > $ ls -l cpdv.conf > -rw-r--r-- 1 karl karl 2257 Jan 16 2014 cpdv.conf > $ ls -lc cpdv.conf > -rw-r--r-- 1 karl karl 2257 Apr 18 07:59 cpdv.conf > $ grep ^Version cpdv.conf > Version=1.0.1 > This is then the same problem with itNomiBibbia. > > ___ > sword-devel mailing list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] Module upload: CPDV
On 4/18/19 6:53 AM, Peter Von Kaehne wrote: uses the same module manager as Xiphos Crosswire's mods.d.tar.gz was not regenerated after the update. That's why Xiphos doesn't see it after refresh. $ pwd /home/karl/.sword/InstallMgr/20081216195754/mods.d $ ls -l cpdv.conf -rw-r--r-- 1 karl karl 2257 Jan 16 2014 cpdv.conf $ ls -lc cpdv.conf -rw-r--r-- 1 karl karl 2257 Apr 18 07:59 cpdv.conf $ grep ^Version cpdv.conf Version=1.0.1 ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] Module upload: CPDV
I downloaded it in Bishop (which uses the same module manager as Xiphos and saw it on the site ready for jsword frontends as zip. Peter > Gesendet: Donnerstag, 18. April 2019 um 09:47 Uhr > Von: "Cyrille" > An: "SWORD Developers' Collaboration Forum" , > ref...@crosswire.org > Betreff: Re: [sword-devel] Module upload: CPDV > > I download manually because xiphos doens't see it. Maybe you need to add > this entry in the conf: > Versification=Vulg > > Il 18/04/2019 10:11, ref...@crosswire.org ha scritto: > > Dear All, > > This is to announce that we have just now uploaded CPDV. > > This is is an updated version of CPDV. > > Many thanks to update for the hard work. > > > > yours > > > > The Module Team > > > > P.S.: This email is sent automatically on upload of a new/updated module > > > > ___ > > sword-devel mailing list: sword-devel@crosswire.org > > http://www.crosswire.org/mailman/listinfo/sword-devel > > Instructions to unsubscribe/change your settings at above page > > > ___ > sword-devel mailing list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page > ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] Module upload: CPDV
I download manually because xiphos doens't see it. Maybe you need to add this entry in the conf: Versification=Vulg Il 18/04/2019 10:11, ref...@crosswire.org ha scritto: > Dear All, > This is to announce that we have just now uploaded CPDV. > This is is an updated version of CPDV. > Many thanks to update for the hard work. > > yours > > The Module Team > > P.S.: This email is sent automatically on upload of a new/updated module > > ___ > sword-devel mailing list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
[sword-devel] Module upload: CPDV
Dear All, This is to announce that we have just now uploaded CPDV. This is is an updated version of CPDV. Many thanks to update for the hard work. yours The Module Team P.S.: This email is sent automatically on upload of a new/updated module ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
Re: [sword-devel] The Septuagint
Il 14/04/2019 18:49, David Haslam ha scritto: > FYI. A lengthy article about the LXX. > > https://christianpublishinghouse.co/2019/03/20/the-septuagint-a-bible-translation-that-changed-the-world/ > Thanks very interesting article, this bible is still the one use by our orthodoxe brothers... I have in my folder a complete LXX, with greek accent and morph, and an other without morph. In the current modules (KJV with strong) the deutéro and apocryphe are missing. I don't know if it is possible to merge an existant module with an other source? Or maybe propose two different modules, one with strong number without deut and apo, and a complet version without Strong's number? > > David > > Sent from ProtonMail Mobile > > ___ > sword-devel mailing list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page ___ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
