Crash
Hi, writng this from the computer of my wife where in the The Bat settings can I find my registration key? Reason: after my computer ran in terrible hardware problems, it went back to the shop and they tested it and replaced several hardware parts. Unfortunately they also destroyed the operating system (Windows 8 Pro)at my system disk and erased my second disk with all my data to install Linux for those tests. Acronis was unable to restore a backup from an external harddisk. The excuse from the company doesn't really help. Through a repair disk I at least have access to the application and user files and I already could find some reg keys, but not the one from The Bat. Once I've found all keys from my software, I can setup the PC from scratch Kind regards, Gunivortus -- Current version is 5.2.2 | 'Using TBUDL' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: Crash
On 27 January 2013, 19:30, Gunivortus Goos wrote: Unfortunately they also destroyed the operating system (Windows 8 Pro)at my system disk and erased my second disk with all my data to install Linux for those tests. Acronis was unable to restore a backup from an external harddisk. The excuse from the company doesn't really help.~~~ Unfortunately, I don't know where the registration key is kept, but I suspect it's not with your message bases as each time I've installed TB! I've needed to reload my key from the email I got when I purchased my licence. If you haven't got a backup of your registration email message, perhaps you can persuade Ritlabs technical support to resend that message (if you can give them enough info to verify your entitlement). FWIW, they resent my v5 registration message when the original hadn't arrived over 48 hours after I bought my upgrade, but that's no guarantee they'll do the same in your case. As to why that company managed to erase the data on your second HD ... there really isn't any excuse for that IMO as they could have booted the computer from a Linux live CD. Distros like Puppy Linux exist largely for this reason and most of the major distros have live CDs from which you can boot without needing to change the contents of your hard drive. Unfortunately, many of these companies' TCs put the onus on you to have a valid backup and they disclaim liability for data loss. I assume that you used Acronis to back up (and verify) data that it subsequently can't restore. If you still have the external HD, I suggest contacting Acronis technical support. After all, it's not good for them if they can't provide the very function for which their product exists! HTH, -- Geoff Lane Cornwall, UK -- Using The Bat! v5.2 on Windows XP 5.1 Build 2600 Service Pack 3 Current version is 5.2.2 | 'Using TBUDL' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re:Crash
Hello Gunivortus, On Sun, 27 Jan 2013, at 20:30:37 [which was on Sunday at 19:30 where I live] you wrote: where in the The Bat settings can I find my registration key? It is in the registry. Reason: after my computer ran in terrible hardware problems, it went back to the shop and they tested it and replaced several hardware parts. Unfortunately they also destroyed the operating system (Windows 8 Pro)at my system disk and erased my second disk with all my data to install Linux for those tests. Acronis was unable to restore a backup from an external harddisk. The excuse from the company doesn't really help. Through a repair disk I at least have access to the application and user files and I already could find some reg keys, but not the one from The Bat. Once I've found all keys from my software, I can setup the PC from scratch I have just had to a crash repair, and did the following Install TB! Restore from a backup Install key from mail. I have in the past also copied the full reg keys and reloaded the mail files into the correct place. -- Cheers David mailto:da...@elliott.uk.com Current version is 5.2.2 | 'Using TBUDL' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: Crash
Hi David, where in the The Bat settings can I find my registration key? It is in the registry. Thought so... but where? I have just had to a crash repair, and did the following Install TB! Restore from a backup Install key from mail. As I wrote, Acronis can't access the image from an external harddisk. And the whole mailbase was involved - the repair company simply formatted the second drive to install Linux there. So my only chance is to restore the key from the registry if I knew where to find it. -- Regards, Gunivortus Current version is 5.2.2 | 'Using TBUDL' information: http://www.silverstones.com/thebat/TBUDLInfo.html
