Re: -current kernel freeze
Rod Whitworth wrote Friday, April 08, 2011 1:46 AM
>
> On Fri, 8 Apr 2011 02:33:51 +0200, Florian Fuessl wrote:
>
> >upgrading GENERIC kernel from snapshot 24-Mar-2011 to -current results
> in
> >system freezes after some minutes (up to some hours) without any error
> >message, here:[...]
> 8> In case it is useful here is a close relative.
> Mine was based on same snap but cvs updated & compiled a couple of days
> later:
> OpenBSD 4.9-current (GENERIC) #0: Mon Apr 4 13:35:18 EST 2011
> r...@nero.witworx.com:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Celeron(R) D CPU 3.20GHz ("GenuineIntel" 686-class) 3.21
> [...]
> Slightly different hardware but running fine as of today.
>
> HTH,
snapshot of 16-Apr-2011 is running fine, now :)
OpenBSD 4.9-current (GENERIC) #35: Sat Apr 16 16:30:24 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xT
PR
real mem = 1073258496 (1023MB)
avail mem = 1045557248 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf,
SMBIOS rev. 2.3 @ 0xec000 (77 entries)
bios0: vendor HP version "P51" date 04/26/2006
bios0: HP ProLiant DL380 G4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe000, bus 0-255
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec8, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
ioapic3 at mainbus0: apid 11 pa 0xfec84000, version 20, 24 pins
ioapic4 at mainbus0: apid 12 pa 0xfec84400, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 3 (PCXA)
acpiprt2 at acpi0: bus 4 (PCXB)
acpiprt3 at acpi0: bus 2 (PTA0)
acpiprt4 at acpi0: bus 6 (PCXC)
acpiprt5 at acpi0: bus 10 (PCXD)
acpiprt6 at acpi0: bus 5 (PTC0)
acpiprt7 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
bios0: ROM list: 0xc/0x8000 0xc8000/0x4000! 0xcc000/0x1600
0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
bridge io address conflict 0x1000/0x3000
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 3
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 1 (irq 5), address 00:18:fe:72:82:73
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 2 (irq 5), address 00:18:fe:72:82:72
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
ciss0 at pci3 dev 3 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 10
int 3 (irq 5)
ciss0: 1 LD, HW rev 1, FW 2.76/2.76, 64bit fifo
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI3 0/direct
fixed
sd0: 69459MB, 512 bytes/sec, 142253280 sec total
ppb3 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c: apic 8 int 16
(irq 255)
pci4 at ppb3 bus 5
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 6
em0 at pci5 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 11
int 2 (irq 5), address 00:04:23:d6:cc:40
em1 at pci5 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 11
int 1 (irq 5), address 00:04:23:d6:cc:41
ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 10
em2 at pci6 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 12
int 1 (irq 5), address 00:04:23:ce:cb:74
em3 at pci6 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 12
int 2 (irq 5), address 00:04:23:ce:cb:75
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
18 (irq 5)
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 8 int
23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"
Re: -current kernel freeze
On 04/07/11 20:33, Florian Fuessl wrote:
Hi,
upgrading GENERIC kernel from snapshot 24-Mar-2011 to -current results in
system freezes after some minutes (up to some hours) without any error
message, here:
OpenBSD 4.9-current (GENERIC) #1: Fri Apr 8 02:20:49 CEST 2011
root@[...]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xT
PR
real mem = 1073258496 (1023MB)
avail mem = 1045561344 (997MB)
[snip]
I can confirm this. Twice in the last day or so my package builder
has frozen after a few hours. Previously on Wednesday the kernel
paniced.
OpenBSD 4.9-current (GENERIC.MP) #11: Thu Apr 7 21:29:35 EDT 2011
root@sata6:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
real mem = 3209814016 (3061MB)
avail mem = 3147149312 (3001MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/20/10, SMBIOS rev. 2.7 @
0xead50 (20 entries)
bios0: vendor American Megatrends Inc. version "4.6.4" date 02/17/2011
bios0: BIOSTAR Group TP67B+
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC SSDT MCFG HPET ASPT
acpi0: wakeup devices PS2K(S1) PS2M(S1) UAR1(S4) BR20(S1) EUSB(S4)
USBE(S4) P0P1(S4) P0P2(S4) P0P3(S4) P0P4(S4) PEX0(S4) PEX1(S4) PEX2(S4)
PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) PEX7(S4) SLPB(S0) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x2a, can't get bus clock (0x0)
cpu0: apic clock running at 102MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu4:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu5:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu6:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel"
686-class) 3.51 GHz
cpu7:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (P0P2)
acpiprt3 at acpi0: bus -1 (P0P3)
acpiprt4 at acpi0: bus -1 (P0P4)
acpiprt5 at acpi0: bus 2 (PEX0)
acpiprt6 at acpi0: bus 3 (PEX1)
acpiprt7 at acpi0: bus 4 (PEX2)
acpiprt8 at acpi0: bus -1 (PEX3)
acpiprt9 at acpi0: bus -1 (PEX4)
acpiprt10 at acpi0: bus -1 (PEX5)
acpiprt11 at acpi0:
Re: -current kernel freeze
On Fri, 8 Apr 2011 02:33:51 +0200, Florian Fuessl wrote:
>upgrading GENERIC kernel from snapshot 24-Mar-2011 to -current results in
>system freezes after some minutes (up to some hours) without any error
>message, here:
>
>OpenBSD 4.9-current (GENERIC) #1: Fri Apr 8 02:20:49 CEST 2011
>root@[...]:/usr/src/sys/arch/i386/compile/GENERIC
>cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
>cpu0:
>FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
>SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xT
>PR
8> subscribed to the list.
Mail to the sender address that does not originate at the list server is
tarpitted. The reply-to: address is provided for those who feel compelled to
reply off list. Thankyou.
Rod/
---
This life is not the real thing.
It is not even in Beta.
If it was, then OpenBSD would already have a man page for it.
-current kernel freeze
Hi,
upgrading GENERIC kernel from snapshot 24-Mar-2011 to -current results in
system freezes after some minutes (up to some hours) without any error
message, here:
OpenBSD 4.9-current (GENERIC) #1: Fri Apr 8 02:20:49 CEST 2011
root@[...]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xT
PR
real mem = 1073258496 (1023MB)
avail mem = 1045561344 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf,
SMBIOS rev. 2.3 @ 0xec000 (77 entries)
bios0: vendor HP version "P51" date 04/26/2006
bios0: HP ProLiant DL380 G4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe000, bus 0-255
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec8, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
ioapic3 at mainbus0: apid 11 pa 0xfec84000, version 20, 24 pins
ioapic4 at mainbus0: apid 12 pa 0xfec84400, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 3 (PCXA)
acpiprt2 at acpi0: bus 4 (PCXB)
acpiprt3 at acpi0: bus 2 (PTA0)
acpiprt4 at acpi0: bus 6 (PCXC)
acpiprt5 at acpi0: bus 10 (PCXD)
acpiprt6 at acpi0: bus 5 (PTC0)
acpiprt7 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
bios0: ROM list: 0xc/0x8000 0xc8000/0x4000! 0xcc000/0x1600
0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
bridge io address conflict 0x1000/0x3000
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 3
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 1 (irq 5), address 00:18:fe:72:82:73
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 2 (irq 5), address 00:18:fe:72:82:72
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
ciss0 at pci3 dev 3 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 10
int 3 (irq 5)
ciss0: 1 LD, HW rev 1, FW 2.76/2.76, 64bit fifo
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI3 0/direct
fixed
sd0: 69459MB, 512 bytes/sec, 142253280 sec total
ppb3 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c: apic 8 int 16
(irq 255)
pci4 at ppb3 bus 5
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 6
em0 at pci5 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 11
int 2 (irq 5), address 00:04:23:d6:cc:40
em1 at pci5 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 11
int 1 (irq 5), address 00:04:23:d6:cc:41
ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 10
em2 at pci6 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 12
int 1 (irq 5), address 00:04:23:ce:cb:74
em3 at pci6 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 12
int 2 (irq 5), address 00:04:23:ce:cb:75
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
18 (irq 5)
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 8 int
23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x01 at pci7 dev 4 function 0 not configured
"Compaq iLO" rev 0x01 at pci7 dev 4 function 2 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "In
