Hello.
I've tested 2 different PCI PCMCIA/CardBus adapters known to OpenBSD
with the latest snapshot GENERIC kernel but no one of them has reached
operational state. Both adapters work on i386 machines.
chip RICOH R5C475II:
OpenBSD/hppa BOOT 1.2
boot>
booting dk5a:/bsd: 4190208+1253376+606208 [80+203648+186846]=0x6a5774
SPID bits: 0xfe0, error = 0
pdc_coproc: 0xc0, 0xc0; model 10 rev 1
WARNING: BTLB purge failed
WARNING: cannot block map kernel text
[ using 391028 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3-beta (GENERIC) #27: Fri Feb 15 20:09:52 MST 2013
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/785/B1000 (AllegroLow W) PA-RISC 2.0a
real mem = 1073741824 (1024MB)
rsvd mem = 524288 (512KB)
avail mem = 1045942272 (997MB)
mainbus0 at root [flex fff8]
pdc0 at mainbus0
power0 at mainbus0 offset 400804
lcd0 at mainbus0 offset 5d0008: model 0
cpu0 at mainbus0 offset ffa irq 31: PCXW L1-A 300MHz, FPU PCXW rev 1
cpu0: 512K(64b/l) Icache, 1024K(64b/l) wr-back Dcache, 160 coherent TLB
mem0 at mainbus0 offset ed10200: size 1024MB
astro0 at mainbus0 offset ed0: Astro rev 2.1
elroy0 at astro0 offset ed3c000: Elroy TR2.1 APIC ver 20, 7 pins
pci0 at elroy0
elroy1 at astro0 offset ed38000: Elroy TR2.1 APIC ver 20, 7 pins
pci1 at elroy1
elroy2 at astro0 offset ed32000: Elroy TR2.1 APIC ver 20, 7 pins
pci2 at elroy2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0x80can't map registers
elroy3 at astro0 offset ed3: Elroy TR2.1 APIC ver 20, 7 pins
pci3 at elroy3
dc0 at pci3 dev 12 function 0 "DEC 21142/3" rev 0x41: line 2 irq 2, address
00:10:83:36:20:0b
lxtphy0 at dc0 phy 1: LXT970 10/100 PHY, rev. 3
"Analog Devices AD1889 Audio" rev 0x00 at pci3 dev 13 function 0 not configured
pciide0 at pci3 dev 14 function 0 "NS PC87415 IDE" rev 0x03: DMA, channel 0
configured to native-PCI, channel
1 configured to native-PCI
pciide0: using line 0 irq 3 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA, 2014MB, 4124736 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable
wd0(pciide0:0:0): using BIOS timings, DMA mode 2
cd0(pciide0:0:1): using BIOS timings, DMA mode 2
ssio0 at pci3 dev 14 function 1 "NS 87560 Legacy I/O" rev 0x01: line 0 irq 3
com0 at ssio0 offset 3f8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at ssio0 offset 2f8 irq 3: ns16550a, 16 byte fifo
lpt0 at ssio0 offset 378 irq 7
ohci0 at pci3 dev 14 function 2 "NS USB" rev 0x02: line 0 irq 3, version 1.0,
legacy support
siop0 at pci3 dev 15 function 0 "Symbios Logic 53c896" rev 0x04: line 1 irq 5,
using 8K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
siop0: switching to single-ended mode
siop1 at pci3 dev 15 function 1 "Symbios Logic 53c896" rev 0x04: line 1 irq 5,
using 8K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
sd0 at scsibus2 targ 5 lun 0: SCSI3 0/direct fixed
serial.SEAGATE_ST336607LC_3JAX0RVN7516ZSR5
sd0: 35003MB, 512 bytes/sector, 71687372 sectors
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "NS OHCI root hub" rev 1.00/1.00 addr 1
siop1: target 5 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: 10/0/15/1.5 class=1 flags=80 hpa=0xf4004000 spa=0x0
io=0x19000
root on sd0a (035c775f1aac71c7.a) swap on sd0b dump on sd0b
chip RICOH R5C485:
OpenBSD/hppa BOOT 1.2
boot>
booting dk5a:/bsd: 4190208+1253376+606208 [80+203648+186846]=0x6a5774
SPID bits: 0xfe0, error = 0
pdc_coproc: 0xc0, 0xc0; model 10 rev 1
WARNING: BTLB purge failed
WARNING: cannot block map kernel text
[ using 391028 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3-beta (GENERIC) #27: Fri Feb 15 20:09:52 MST 2013
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/785/B1000 (AllegroLow W) PA-RISC 2.0a
real mem = 1073741824 (1024MB)
rsvd mem = 524288 (512KB)
avail mem = 1045942272 (997MB)
mainbus0 at root [flex fff8]
pdc0 at mainbus0
power0 at mainbus0 offset 400804
lcd0 at mainbus0 offset 5d0008: model 0
cpu0 at mainbus0 offset ffa irq 31: PCXW L1-A 300MHz, FPU PCXW rev 1
cpu0: 512K(64b/l) Icache, 1024K(64b/l) wr-back Dcache, 160 coherent TLB
mem0 at mainbus0 offset ed10200: size 1024MB
astro0 at mainbus0 offset ed0: Astro rev 2.1
elroy0 at astro0 offset ed3c000: Elroy TR2.1 APIC ver 20, 7 pins
pci0 at elroy0
elroy1 at astro0 offset ed38000: Elroy TR2.1 APIC ver 20, 7 pins
pci1 at elroy1
elroy2 at astro0 offset ed32000: Elroy TR2.1 APIC
