What I use: pin5 = gnd and pin8 = 24VDC, but Corby may have more info.
I don't have specs on model 05818-501. For vintage parts like this an actual
recent measurement is usually worth more than a vintage data sheet. I know from
personal experience that many 5 MHz FTS/Datum 1000 and 1200 oscillators are
stable to parts in ten to the -13th. I'll see if I can dig up phase noise plots
for you.
/tvb
- Original Message -
From: "Ole Petter Ronningen"
To:
Sent: Tuesday, August 05, 2014 5:45 AM
Subject: [time-nuts] FTS1000A 05818-501 spec's
> Hello, all
>
> I went a bit overboard on ebay and ended up with a FTS1000A model
> 05818-501. I've found the datasheet for the FTS1000 on ko4bb's site, but
> the model numbers does not match up. Does anyone know the spec for this
> particular model (phasenoise/stability), and if there's reason to suspect
> that the pinout is different for this particular model?
>
> Thank you all!
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
