[time-nuts] Jupiter Receiver

2008-03-20 Thread Bruce Lanning 
Just thought this would help.

Bruce W1GBS



Table 4. Jupiter Receiver Standard 2x10 Pin Field OEM Interface Connector 
Pinout

PIN NAME DESCRIPTION PIN NAME DESCRIPTION

1 PREAMP Preamp power input 11 SDO1 Serial data output port #1

2 PWRIN_5 Primary +5 VDC power input 12 SDI1 Serial data input port #1

3 VBATT Battery backup voltage input 13 GND Ground

4 N/C Reserved (no connect) 14 N/C Reserved (no connect)

5 M_RST Master reset input (active low) 15 SDI2 Serial data input port #2

6 N/C Reserved (no connect) 16 GND Ground

7 GPIO2 NMEA protocol select 17 GND Ground

8 GPIO3 ROM default select 18 GND Ground

9 GPIO4 Reserved (no connect) 19 TMARK 1PPS time mark output

10 GND Ground 20 10KHZ 10 KHz clock output


___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Re: [time-nuts] Jupiter receiver

2006-01-01 Thread Didier Juges 
I forgot to add that I unfortunately did not think of checking the 
correlation between the Jupiter GPS receiver and the DSClock software on 
the PC BEFORE the end of 2005 :-(

Didier

___
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts